2021 Ford F-150 Volunteer Fireman Red and White Strobe Lights

**The products featured in this video will be linked in the description below. This video features a red and white strobe lights package for a volunteer fireman on a 2021 Ford F-150. The strobe lights on this build offer a quicker and more aggressive red-white display. In the front of the truck, we used the 2-color Feniex Fusion Windshield Light in red-white and installed it using the dual-lock Velcro. Within the grille, we're featuring four of the 4-inch mpower strobe lights in red-white flashing in an X-pattern. The mpowers in this location use a damage-free install.
Along the sides of the truck, you can see the 3-inch mpower strobe lights on an inter cycle pattern. In the rear of the truck, you can see our Thin-X in red-white in the back window which we mounted with a bracket.
This truck came to us from Wisconsin and when the truck is on-scene, it cannot use the white strobe lights, so there are a few different warning modes included within this build. The responding mode features the combination of red and white strobe lights. A different mode will flash all-red, and we have a third mode that is almost all white. The Feniex Windshield light did not allow for an all-white display, though we are working on a work-around for that light.
This truck also has the Carson Hand-Held Controller and 100-Watt Siren which controls the red and white strobe lights and all of the siren tones. Please visit WickedWarnings.com to see more details about our strobe lights and safety products. If you have any questions about our strobe lights, please send us an email at [e-mail].
Purchase this parts kit:
www.wickedwarnings.com/produc...
Products Featured:
4-inch mpower - www.wickedwarnings.com/produc...
3-inch mpower - www.wickedwarnings.com/produc...
Thin-X - www.wickedwarnings.com/produc...
Carson Hand-Held Siren & Light Controller - www.wickedwarnings.com/produc...
**The Feniex Fusion Windshield Light is a special order item. Please email us at [e-mail] for more information or to place your order.
More Videos:
2021 F-150 Grille Removal and Emergency Light Installation - • 2021 F-150 Grille Remo...
2021 F-150 Tech Tip: mpower 3" Badge Strobe Light Install - • 2021 Ford F-150 Tech T...
Be Seen & Be Safe!
Contact Us:
[e-mail]
www.wickedwarnings.com
Follow Wicked Warnings:
/ wickedwarnings
/ wickedwarnings
And remember to subscribe to our KZbin Channel to see our latest builds!

[@joecarrolljnr]

Very effective George. Tasteful install.

[@WickedWarnings]

Thanks for commenting, keep watching for more great content.

[@brandonrodgers6767]

that new tone your talk about is called the powercall siren

[@WickedWarnings]

Good to know. Thanks for your comment!

[@LakesRegionEmergencyPhoto]

Great install! Looks good!

[@WickedWarnings]

Thank you!

[@frklein1]

George, could the LIN light in the badge be set up to ‘steady burn’ and connected to the parking/headlights?

[@WickedWarnings]

They steady burn, but do not combine with other circuits please.

[@blakeseverson9866]

What double sided strong tape do you use for windshield mounting? I hate suction cups as well but the double sided tapes that I have tried all fail within a few days.

[@WickedWarnings]

We used 3M Dual Lock.

[@MWDAdventures]

so I have the 4x2 for the grill how did you set the pattern. top left and bottom right on what pattern? Then top right and bottom left together? So the green wire is only with the opposite corners? use red to trigger white is 2ndary?

[@WickedWarnings]

You can find the instructions for the mpowers on our website at wickedwarnings.com/manuals/. If you're still having trouble, email [e-mail], please reference this video and the lights you are trying to sync.

[@MWDAdventures]

@@WickedWarnings I got it!! Looks amazing . Thanks for the idea.

[@codycat91]

For the clean install on the grill lights, did you use the stud mount version?? I have the same truck and don’t want to have to drill into the grill or anything

[@WickedWarnings]

We use the quick mount version with 3m adhesion promoter. Both are available on our website at WickedWarnings.com. This video will give you more detail about how we mounted the lights: kzbin.info/www/bejne/inWwh2OmfdmtoNk

[@dickrugh38]

George where did you mount the siren speaker on this build?

[@WickedWarnings]

We usually mount the siren speakers behind the grille. If space is limited, we'll mount them under the hood.

[@user-bg1nv4qd5j]

How did you mount the lights to the grille?

[@WickedWarnings]

the mpowers have a quick mount adhesive

[@imranabbasi7871]

👍

[@WickedWarnings]

Thanks for commenting, keep watching for more great content.

[@tacticalterbear3183]

Where is the badge removal video?

[@WickedWarnings]

Check the links in the description for the mpower 3" badge strobe light install. That video includes more detail about removing the badge.

[@tylerkester3072]

What is the price of this build?

[@WickedWarnings]

Please email us at [e-mail] and reference this video for a quote.