2021 John Deere Z545R Zero Turn Mower Review and Walkaround

[@willcole3565]

Probably the best walk around video ive ever watched on a machine. Well done

[@WesternEquipment]

Wow! Thank you and thanks for watching!

[@gringomackale8992]

I had a JD 325 for 40 years and recently bought a zero turn machine. The zero turn is a nice machine with some definite plusses, but I think it was not a good choice for my personal situation. I live where we get a lot of rain and the soil can hold water. The rear wheels can spin where the grass is thin. When this happens, the machine starts to slide and you can't steer because the steering is with the back wheels. I am a senior lady and it's not easy getting on and off the machine. Good machine but choose according to your situation.

[@jcjc9155]

Thank you for your video. Im absolutely impressed with how john deere is treating me. Im waiting on this mower to be delivered as we speak. Dealer has a vin but just waiting on it to arrive. I would have preferred the the medium size deck. But they are being delivered with 60’s. I have to sell my two trailers to get a bigger. Only down side. Deere finance approved me by 7:30 am this morning. They are only going to have 1.9% interest on a 48 month loan. Unbelievable! I mow about 3-4 acres between 3 yards. Elderly neighbors that i do for free. The dealer in tn already ordered me a weedeater rack by just talking to me over the phone. No papers signed yet. They won’t do paperwork until its in inventory. Hopefully it comes in soon cause I am ready! Thank you John Deere. Will. Be a customer for life because of this experience. Everything will be a Deere.

[@WesternEquipment]

Awesome! I am always glad to hear this. Thanks for watching!

[@jcjc9155]

@@WesternEquipment it was delivered last thursday. Love it. 48, 1.9% was the dealers rate. What the dealer got it for. He made an honest mistake. Showed me the page with the rates. I thought it was way to good to be true. That said im good with the 60 month. I’ll have it paid off in two. The mower. Straight off the truck. Setup then delivered next day. 1 foot grass, chewed through it with a very clean cut. It had not been mowed for a week or two. Lots of rain. Left arm gives a little more power than right. Adjusting today or trying to. Again thank you for your content. 1.8 hours to mow all three yards. Love it! Going to have to sell two smaller trailers and get a bigger one cause of the deck size. Not in a rush since Deere picks up and brings back the mower. Could absolutely not be happier with it. EFI, Push throttles amazing. Covered storage box for my phone. The fact it came with that socket/wrench for certain adjustments. Raised the bars and set them up better for me in the middle of mowing. Not having to go back to the house to do it. It’s absolutely the small things.

[@kathykieser2805]

Excellent walk through presentation of this mower. We just ordered this exact same model. As the official “grass maintenance operator and supervisor “ on our farm, my review is…..”SWWEEEET!” Can’t wait to get delivery and try it out! Thanks so much!

[@WesternEquipment]

Thank you and I am glad I could help. Thanks for watching!

[@hans-jurgenwiegand7465]

I’ve got my Z540m, for the last two years, & am very impressed with it, but I went from 2 1/2 acres mowing, to city lot mowing. I got mine with the standard 48” deck to fit it through more places. I usually mow @ 3/4 motor speed, and it does excellently. With my Kavli blades, I haven’t run into any grass/weeds I couldn’t handle with ease. I’ve processed 6’ tall red stocked weeds with no trouble in my standard deck. I have never choked my deck up, & had to get off & push it backwards, to restart the mower, like I did with the standard blades. I’m also mowing full deck width, not partial width. My warranty & Dealership are fantastic. I don’t see a new mower in my future, but I would have bought the Z545R, because it has everything I would have liked, but not necessarily needed.

[@WesternEquipment]

Nice to hear all of the positive notes on your Z540M! Glad to hear you are happy with it and thanks for watching!

[@donbeck6562]

Just got my z450r last month from local dealer. He was good, but nowhere near as good as you. Keep you on to review what I may have forgot. The owner's manuel says to write down the serial numbers on the Transaxel, but they're hidden under the reservoirs. Had salesman call J. D. They said those numbers are attached to my warranty. Just an FYI if anybody needs it. This machine is awesome. Read reviews on others where people said there mower would spin out on wet grass. This JD doesn't care, it just keeps going!

[@WesternEquipment]

I am glad you are happy with your mower and thanks for the comment. Also, thanks for watching!

[@Dale37]

I mowed for the first time with mine yesterday. Put 2.9 hours on it mowing my 5 acre yard, not bad, in my opinion, considering I was being conservative with my cut speed and taking more time around obstacles while getting comfortable with the mower. I did avoid a couple wet spots in the yard, so I probably mowed closer to 4.5 acres. The mower done great! I did notice the dealers technician that assembled my mower didn't do a flawless job. Luckily, I was able to adjust the deck height with the level gauge and put a cotter pin in one of the deck pins that held the deck in place. I had to mow about two acres of six or so inch tall grass that I didn't mow the last couple of months last year. The fuel light came on around the 2.7-hour mark. Hopefully, that improves with break-in and less workload. The fuel injection is nice, turn the key, and nothing else has to be done, it just starts right up! The comfort glide seat makes mowing the rougher areas a breeze! I was amazed at how comfortable the mower is to operate. The only thing I could ask for is the parking brake feature the 3 & 7 series have. I'm used to the current one from my old 3 series but it would be nice to have.

[@WesternEquipment]

I agree with you on the park brake feature and i would assume this is to come in the future. I am so glad to hear that you have had such a good experience with your mower. Thanks for the feedback and the comment!

[@scottmchaffie8059]

Just got my 545R delivered and really love it! Still have my old 320 mower and the 1026R Tractor/ Loader. My dealer and their staff (Findlay Implement) are top notch. Nothing runs like a Deere!

[@WesternEquipment]

Awesome! Glad to hear you are liking your mower and that your local dealer takes good care of you. Thanks for watching!

[@tomcat6933]

I have the x590 and debating rather or not to get this one or the 7 series? Are you still using your 320 since you have the z545?

[@scottmchaffie8059]

Yes, still using the 320 even after 32yrs. Mower deck completely rebuilt...spindles, bearings, races, etc....all new...mows flawlessly again!!

[@scottmchaffie8059]

545R is perfect for @2-3 acres...in comparison for f I were to get the 7 series, I'd most likely do the 9 series instead...much more for very little...The 9 is full commercial and the 7 was close....no mowing for a living so went with the 5

[@tomcat6933]

@@scottmchaffie8059 I headed to the john deere dealer for a tire repair this coming week and i am afraid i will bring home a new zero turn. Sounds like a 545r or 9 series. Thanks for the recommendation.

[@proteinprayer854]

I'm 14 and I run a small lawn care business started with a GT225 with the 48 in deck and just got this with the 60 in deck and its an absolute beast! I love the ETC with the EFI engine.

[@WesternEquipment]

Awesome! I'm glad to hear you are liking your mower. Keep up the good work and thanks for watching!

[@Corkoth55]

Hope you keep that GT around.

[@harrypoole1294]

Just purchased this z545R today. The walk through was superb. Looking forward to using it. I also own a x534 and x320...always have good luck with green. WJP

[@WesternEquipment]

Awesome and thanks for the compliment. I hope you enjoy your mower and thanks for watching!

[@Doyle-Nutbush]

Deere should have you train all of the salesman nationwide on products. Period!

[@WesternEquipment]

Wow! Well thank you for the compliment and thanks for watching!

[@Doyle-Nutbush]

@@WesternEquipment btw, would you buy the Z545R with the EFI Briggs or the Z530 R with the carburetor Kawasaki. I’ve never had a good experience with Brigg’s over the last 40 years and have heard from many Deere service guys that the Kawasaki was tops in service/reliability???

[@WesternEquipment]

@@Doyle-Nutbush I definitely agree that the Kawasaki has proven itself time and time again to be a superior engine to most others. But with this Briggs EFI being the first one that I have seen I'm not sure how it will do. I personally like the way the throttle functions and the simplicity. Too soon to tell in my opinion on which will be better but I think this Briggs EFI will prove to be a good one!

[@ZR1Terror]

Just bought one of these today. Will be delivered tomorrow. I’m excited to get it.

[@WesternEquipment]

Awesome! I hope you enjoy it and thanks for watching!

[@DanielGarcia-zz9eg]

just pick up my Z545R. im loving it. the lights are super bright and thanks for a quick 411 on the new 2021 zero turn .

[@WesternEquipment]

Awesome, I'm glad I could help! Thanks for watching!

[@Shadoweee]

How is it so far?

[@DanielGarcia-zz9eg]

@@Shadoweee great so far. Just gotta get used to no more choke. I keep reaching for it. Just turn the key and mow

[@egreenspot]

I wish they told us that this Z345r would not work with the optional ‘bags’ attachment. It definitely needs an additional vacuum motor to assist filling the bags

[@WesternEquipment]

I have heard this a few times, so hopefully there is a redesign coming. Thanks for watching!

[@markstein6226]

Great video. Very thorough, well explained, and with great clarity. Thanks!

[@WesternEquipment]

Thank you and thanks for watching!

[@typsytrae]

Question about pull behind attachments. Would it be able to pull a sweeper, aerator, and de thatcher? Or would those those pull behind attachments ware away at the Z545R faster?

[@WesternEquipment]

It could definitely handle those attachments, no problem! And if for some reason your hitch did start to wear out, you can replace it. Good question and thanks for watching!

[@evanartz4618]

Great review. To help for those considering a purchase of a Z545R, Could you add what changes were made for the '22 model and what is anticipated for the '23 model?

[@WesternEquipment]

Nothing changed on the '22 models and I have not heard of any changes on the '23 models yet. If there are any then I will definitely get a video out on it.

[@dankruger2890]

just bought a 22' z545r. It was a Major decision with all the different options out there. What are you getting for the price???? Trans axles to the engine to the deck.

[@WesternEquipment]

Well in the Z500 series you are getting the highest end of everything with the Z545R. Fuel injected engine, highest end transaxles and the nicest deck offered in the Z500 series. I hope this answered your question. Thanks for watching!

[@vincentvanpaepeghem4844]

Great video Brent! John Deere keeps on out doing themselves, lol! Thanks for sharing! Have a great and awesome day!

[@WesternEquipment]

Thanks Vincent! I completely agree. This is an awesome machine!

[@Rocksolidbullys]

Do all the R series have the light kit? Johndeere website mentions that the z545R but nothing about the z530R.

[@WesternEquipment]

Yes, both the Z530R and the Z545R come with the 4 point LED light kit.

[@jeromebooren856]

Great walk thru on operation of this mower...very complete and informative. good job!

[@WesternEquipment]

Thank you and thanks for watching!

[@AtHomewithTomandRhonda]

Got mine yesterday and I love it! Great video, Thanks for the run through!

[@WesternEquipment]

Awesome! I am glad you are enjoying your mower!

[@MikeBeauchamp]

Best video walk around and overview ever. Thank you for making this.

[@WesternEquipment]

Thank you and thanks for watching!

[@iwanaGoFast2010]

Dear Brent I have a question. I finally got my Z530r and its awsome. John Deere websitet says the 530r has TZT7m transaxles but my manual says it has TZT7u on the 530r only showing the 545r with the tzt7m transaxle. Which one is right because I'm about to bring this thing back. The sales people don't know nothing like you. You love your job and mowers. Thanks for you help.

[@WesternEquipment]

Everything I am showing is that they both have the TZT7M, but I also looked in the owners manual and I would assume this is just a typo in the operator manual since it is supposed to encompass the entire Z5 lineup. All of my sales manual material show that both R models have the TZT7M so I'm pretty sure that is correct.

[@iwanaGoFast2010]

@@WesternEquipment I think it’s a typo also because it also shows the tire size for the z530r are 10 inch rims in the manual and mine are clearly 12. Thanks for checking one of the reasons I went with the R was the slightly upgrades transaxles.

[@phillipstough8946]

Wish they would integrate the parking handle in the levers like they do on the Z7s.

[@WesternEquipment]

Same here! I don't understand why they didn't but hopefully in the future they will. Thanks for watching!

[@asdf4567king]

I was looking at the Kubota Z422KW-54 but you may have sold me on this

[@WesternEquipment]

Well I think you made the right choice! Haha! Thanks for watching!

[@MechanicDawson06]

Well this video sold me on a JD z545r. I will be probably getting one in a month. lol

[@WesternEquipment]

Awesome! Thanks for watching!

[@Sea-Bass]

Would you Recommend a 48 inch deck, or are the wheels to wide to get close enough to a fence so you would have to do much more weed whacking?

[@WesternEquipment]

A 48" deck would still have enough over hang to get up next to a fence but a 54" would give you more to get underneath a fence if needed. Thanks for watching!

[@Sea-Bass]

@@WesternEquipment thanks

[@carljensen5730]

I want to know how many plastic parts does it have that ARE going to break?

[@yendor33x]

Can you make a recommendation or video review of the Z530R?? I am trying to decide between the Z530R and Z720E. Quoted around $5500 out the door for Z530R 54 inch. The Z720E will certainly be $1100+ more. Is it truly worth the price jump for..: more commercial "like" deck, 1hp less kawasaki model engine, and heavier duty hydros? Please advise. Thank you kindly.

[@WesternEquipment]

Those are all correct and you will also get a larger frame, an upgraded parking break system and a few other features. Check out this video, I think it will help with your decision kzbin.info/www/bejne/jXzIqWeHgcymaaM. Thanks for watching!

[@yendor33x]

@@WesternEquipment appreciate the feedback. I think I will go with the 720 I like the bigger frame and parking brake feature for sure.

[@yendor33x]

@@WesternEquipment they are so hard to get though I’ve been waiting a week already from my local AL dealer to get one from another Sunsouth location.

[@hkyskatz]

Thanks for the fantastic reviews they are amazing! I have ordered my Z545R and cant wait to start mowing. Any thoughts on a mulch kit vs the side eject. I have about 2 acres of grass but dont want a big mess to clean up after mowing.

[@WesternEquipment]

Well thank you for watching and congrats on the new mower! If you are able to stay on top of your mowing and not let the grass get too tall then the side discharge should be fine for you but the mulching systems are great too. Mulching is always better for your lawn health so i suggest people to mow more often and mulch but I know time is often an issue. Good thing is the mulch kit can always be added afterwards so if you do not like how the side discharge does then the mulch kit is always an option. I hope this helps and once again thanks for watching!

[@glennwerst]

Are the bearing on the mower deck open so grease can actually get in and work or are they sealed like the ones on my older Deere riding lawnmower I burnt spindles up on even though I greased. Tore it apart just to find sealed bearings.

[@WesternEquipment]

This is a good question. I am not 100% sure on this mower since I have yet to tear into one of the spindles on this machine. Sorry I couldn't be more help and thanks for watching!

[@anitafleice5726]

Is it possible to have the foot controls on the left, for an operator with an injured right leg?

[@WesternEquipment]

I will have to look into this but that is a great question!

[@ExplosionsAreAwesome]

Ms. Fleice, I am paralyzed from the waist down and use a wheelchair. I've been considering buying a JD zero turn for a couple of years to replace my 2002 tractor-style GT235. As soon as the 2021s came out and I saw the new deck height system, I called my local dealer and asked them to find me a 2020 Z540R, which they did. The 2020s and before have a deck height system you can operate entirely by hand, without having to use either foot. While the 2021 deck height system might be an improvement, for someone like me who can't use their feet, it's useless. Plus to each their own, but I prefer the Z540R's Kawasaki to the Z545R's Briggs. Hope that helps.

[@lukefrear]

do you have a mulching kit for a 54 inch deck? Just bought this tractor yesterday.. excited to have it for cutting this weekend.

[@WesternEquipment]

The only one available right now is a hard mount mulch kit part number BUC11270. Check us out at 247parts.com and if this number does not show available on the website then call our hotline and our support staff can get you one ordered.

[@madmike7248]

You have any idea of the reason JD decided not to go with a serviceable transmission? That seems to be a selling point with other brands is using a a serviceable transmission.

[@WesternEquipment]

This is a good question and what I always hear is to save the customer from having one more thing to worry about, but i see the other side of it to where some people want to be able to service it. There may be other reasons too that i am not aware of. Good question.

[@madmike7248]

@@WesternEquipment im interested in a deere but that is the one thing that is holding me back. I feel like the 3100+ seriers transmissions have a way longer lifespan that a non serviceable transmission.

[@eshott2935]

What are the advantages of efi in a mower application?

[@WesternEquipment]

Some of the advantages are easier starts and better fuel consumption. These are both big things when talking mower efficiency. Thanks for watching!

[@toddgibbs1321]

Great overview of this machine. I expect that I will be buying one soon.

[@WesternEquipment]

Thank you and I hope you enjoy it! Thanks for watching!

[@geraldbrown2181]

I want to buy one also but I can,t find one

[@notlincolnrupp3546]

Can yo do a mow an acre with this mower. Maybe if you could compare to last years z5 to

[@WesternEquipment]

Check this video out to see what changed from last year to 2021 kzbin.info/www/bejne/pn6aiK2jaNGUpqs and yes we plan on doing a mow an acre when the grass greens up. We are excited to get back to mowing! Thanks for watching!

[@jsnokhous]

I picked up a 530R. My only complaint is the sealed transaxle. I watched a video where someone used a brake bleeder to pump out some of the fluid and refilled to spec. Is there any reason this would be a bad idea to do once a year?

[@WesternEquipment]

Great question. I think changing oil if possible is never a bad idea. I believe this is just a testament to the durability and longevity that John Deere backs y putting these type of transmissions in their mowers. Thanks for watching!

[@russelllowery9049]

with 4 1/2 gallon how many hrs. or acres can you mow..thanks

[@WesternEquipment]

I haven't gotten to do an actual mowing test with this mower yet due to inventory issues but the general rule of thumb is 1 gallon per hour. I'm hoping the performance is better with this machine since it is EFI. Good question and thanks for watching!

[@ctn830]

Trying to decide between a 2023 Z325E or 2019 Z540 R

[@scottbehr5690]

since this video is 2 years old, how does the Briggs stand up in comparison to the Kawasaki?

[@WesternEquipment]

I have heard mainly good feedback. Very little issues with the EFI and most people are very fond of them. Have you heard anything?

[@scottbehr5690]

@@WesternEquipment I've not heard anything... I know Briggs has been around for a long time, I'm just partial to Kawasaki.

[@stevelowry9127]

When using John Deere for over 50 years. I now have a Z525 and at 120 hours both hydraulic drives have to be replaced $1000 each with me doing the work. Does this sound like high-quality John Deere engineering. I’m afraid the days of paying extra to get extra are OVER ,,

[@WesternEquipment]

This is a good question. I don't hear of having to change out drive motors very often, especially on this size of mower. I hate to hear of this misfortune.

[@michaeldinnocenzo5192]

Question about the mulcher on demand. They are telling me the 545r is not available but on the site it says it's available. You have any info on it.

[@WesternEquipment]

It looks like, as of right now it is only available for the 54" deck on the Z545R. There have been issues the past year or so on part availability on a lot of these attachments. It is getting better but still not perfect. Thanks for watching!

[@michaeldinnocenzo5192]

So your saying the MOD will work

[@Coldheartedmanong]

Could you do a review on the W36 (M or R)?

[@WesternEquipment]

If we can get one in then I definitely will. Thanks for watching!

[@JB.Olsen7]

Thinking of trading in my Ferris stand on for this. Happy with it so far?

[@WesternEquipment]

We have had a bunch of happy customers that have bought this mower. Seems to be very popular. Thanks for watching!

[@transam6t9]

I know you explained how you can adjust for size, but im alot bigger , im 350lb , i need about 21 inches from the seat to where the handles would stop when pulled back , is there any way you could measure that for me and let me know if it will adjust that far, i know the cub cadet and craftsmen do have plenty of adjustment, they have a really good adjustment, but i want to buy John Deere. Also i wanted a Kaw engine and not a Briggs, do you think that the Briggs will be as good,, or should i step down to another model ,, thanks for your help.

[@WesternEquipment]

I will see what I can do on a measurement and I think this will be one of the best Briggs engines that John Deere has put on a mower yet but you have the option of the Z530R which has almost all of the same features minus the three button throttle selector and EFI. Thanks for the comment and thanks for watching!

[@transam6t9]

@@WesternEquipment thanks for checking on that for me

[@Nick-gi6ym]

Great review thank you efi no more carburetors.

[@WesternEquipment]

Thank you and thanks for watching!

[@dogmangreengrass736]

Will it go through 2 feet high wet thick grass ??

[@WesternEquipment]

This is a good question. I have not been able to do much mowing with this one yet because of inventory issues. My feeling is that you could but you would have to go slow. Of course, it is always recommended to not cut wet grass if possible, but I know at times we don't have a choice. Thanks for watching!

[@dogmangreengrass736]

@@WesternEquipment love to see it do such a video and i guess most of us on here love to see it when your ready . Thanks. Have nice day 🤗

[@chrisjimerson8790]

hey i like your sweatshirt is there anyway i can get one in color black Size X-large

[@WesternEquipment]

Thank you. Not sure if I can still get these but I will do some checking.

[@chrisjimerson8790]

@@WesternEquipment ok and i can send you my street address and state im in as will

[@iwanaGoFast2010]

What kind of oil do the transmissions come with from the factory?

[@WesternEquipment]

I am still working on figuring out the exact wait but it is some sort of oil with the brand name of the transmissions. I can't find any specs on what exact oil it is but I will work on finding that out.

[@iwanaGoFast2010]

@@WesternEquipment The owners manual is very vague. It say fill if the hygard but if you don’t have that put some 10w30. But the company that makes the transmission says to use 5w50. I’m so confused. 😓

[@jomandimotes8873]

Are tweels available for this model?

[@WesternEquipment]

Not yet, but we are hoping for some soon.

[@rohde42]

Man I can’t wait to get my z530r

[@WesternEquipment]

I hope you love it! The new Z5's are awesome!

[@jsnokhous]

Got mine a few weeks ago. It’s awesome, you’ll love it.

[@TheMrbearhunter1]

From my research the exmark radius is in the same price range, possibly cheaper and the deck is heavy duty deep welded deck and is supported by chains not those little bars that need adjustment. I currently run a john deere but the deck on this mower looks way too light duty for 5,000$.

[@WesternEquipment]

This deck is actually a solid sheet of stamped 9 gauge steel where the Exmark is a cut and welded deck made of 10 gauge. This is actually a heavier deck that the Exmark. It also has anti scalping wheels that have framing on both sides instead of just one side like the Exmark that give them more strength and less likely hood to have them broken off. The cut and welded decks are always made out to seem like the better choice but things to consider are with welded decks the paint eventually rubs off and you have the higher possibility of rust-out. Also, when you have welded decks you have corners where you can have build up and the corners creates drag cause less airflow under the deck meaning material won't be moved and processed as fast. And as far as the hangers for the deck they are actually the heavy duty clack pieces that you will see from the 22:00-23:20 mark. The silver bars you see are just the lifting arms. Both are great mowers but I just wanted to point out those few things. Thanks for watching!

[@TheMrbearhunter1]

@@WesternEquipment Thanks for the details, ill be sure to demo / check out both mowers.

[@WesternEquipment]

Let us know either way what you went with and why.

[@TheMrbearhunter1]

@@WesternEquipment Its me again. After doing some research I've came back to the deere. Considering my old LA series riding mower has been absolutely flawless except for the deck falling apart but after 12 years I'm not disappointed considering the abuse and lack of maintenance I've done. I'm now trying to decide between the z515e and the z530m. My current briggs has had 0 issues. All I hear about is how good the kawasaki is but is it worth the price jump? ( the seat and floor mat doesn't really concern me) Considering both have the same warranty I might save the money and go with the briggs. I've been also considering the bobcat but when I sit on the john deere it really feels and looks "commercial" over the zt2000 bobcat. Neither are commercial but the deere platform feels like I'm on a premium machine.

[@Denzy72]

@@TheMrbearhunter1 spend the money and go Kawasaki!

[@liamdonaldson6449]

Also also also x 100? try "as well as", or "In addition" at least now and then?

[@WesternEquipment]

Good point! Thank you, I will work on it. Thanks for watching!

[@naturegirl8248]

I need help ASAP! Please please. My zero turn lawn mower handle is stuck and won't go back into the slot so it wouldn't stop. I got it to stop by turning the whole thing off, but it freaked me out. Do you know how I can fix it?? I just noticed there's a little L shaped metal piece that must have came off of something. I don't have social media so I'm just going to KZbin to hopefully get help

[@WesternEquipment]

Which mower do you have?

[@mcallisteroutdoors.8403]

Would like to see the m 530 in depth if possible.

[@WesternEquipment]

We will try to get to all of the new models as we get them. Stay tuned and thanks for watching!

[@mcallisteroutdoors.8403]

@@WesternEquipment sounds good thanks, great video.

[@scottharlow2138]

Is that a vanguard Briggs and straten motor?

[@WesternEquipment]

I'm not sure to be honest. I am looking more into this. Great question and thanks for watching!

[@Ramman1995]

I have been digging around and it looks like it’s not a vanguard it’s a B&S commercial motor, specifically the 44X9. From what I’m reading they are solid, have a few parts off the vanguards and work good as long as you reset the valves every 300 hours

[@scottharlow2138]

@@Ramman1995 thanks

[@yendor33x]

@@WesternEquipment The 810cc is typically our smallest Vanguard engine. EFI is now being built on lower models like this engine in the video.

[@mikeadler434]

Another great video, thank you.

[@WesternEquipment]

Thank you and thanks for watching!

[@falcon6936]

Is that the new ride height. Seems like a barber shop chair. Good review 🤠👍

[@WesternEquipment]

Haha yes except more comfortable than a barber chair! Thanks for watching!

[@keithnavarro2930]

My wife watched part of this video and gave me her review. "It's pretty".

[@WesternEquipment]

Haha well she isn't wrong! Thanks for watching!

[@eugenecrabs3954]

@leonardo migot Hydrostatic

[@eugenecrabs3954]

@leonardo migot ? You mean EFI? Even EFI still has Throttle Body. Hydrostatic is in most mowers nowadays

[@chrisjimerson443]

can you all so take the mower deck off if you just only want to use the mower it self with deck on it

[@WesternEquipment]

Yes, you sure can. Thanks for watching!

[@itsme-tm4vd]

Great review well explained,

[@WesternEquipment]

Thank you!

[@minersmusclecars]

Hi. I ordered this model from my local dealer. Are there any improvements on the 2022 from this one? I hope I'm making the right choice with the briggs EFI engine. I keep seeing people bash it and dealers telling me to buy the kawasaki. I have a few acres to mow and my current cub cadet riding mower only has 167 hours on it and the hydrostatic went out. So I'm kinda worried about that on this new one hoping I'd be able to service these but it doesn't look like thay can be. I was going to jump up to the z7 but this one is already costing more than msrp due to a shortage. I build muscle cars and know the ins and outs of quality parts but when it comes to mowers I'm out of the loop. Still fuming over the cub cadet at 167 hours going bad of course out of warranty. How many hours do you think this one will last. I do keep my stuff pristine and maintained. I know you dont have a magic 8 ball but whats the estimated life. The salesman has been trying to talk me out of this one and into a z7. Thanks for your time.

[@WesternEquipment]

There currently are not any upgrades that I know of but I also have heard no complaints on this mower since it has been available. I am keeping my ears open on this model specifically as I am curious to see how it performs over time as well. Good question and thanks for watching!

[@TheMexican0128]

How is it holding up?

[@jerrodscott391]

I got a 2021 60 inch z545 with 8 hours how much do yall think it's worth if I sell it

[@WesternEquipment]

That’s tough. I would just do some research of what comparable machines are going for in your area. If all else fails you could call your local dealer and have them give you a quote.

[@bret9741]

Maybe I missed. Do you mention the blade speeds?

[@WesternEquipment]

No , I didn't. I will try to find some blade speed specifications to be able to answer your question. Thanks for watching!

[@bret9741]

@@WesternEquipment thank you. I have a small construction conpany. I normally have 2-3 empty unimproved lots to maintain before their sold and also need to maintain the construction sites. Our city codes require lawns be kept at 6-8” maximum height. The lawn companies are now charging about $1000 a month to mow every 8-10 days. So I’m looking for a mower that I can use to keep my personal yard and the job sites. It’s pretty flat around here.... Northern Ohio. But it’s wet a god part of the spring and fall. I’ve been told to get the faster blade speed for better mulching and functionality in damp grass.

[@jochenkoberstein3837]

Hi Brent, I've got my Z545R delivered about a week ago. So far, I noticed that drive motors have different RPMs with same lever position, so the mower is not going straight. The cleaning of the deck with the hose does not really work, even thought I did it exactly according manual. The ROPS makes noise and the left handle is hard to operate. One armrest just broke down and parts of the engine have already rust on them. Do you have long term experiences? Looks to me as if JD is cheap nowadays...? BR, Jochen

[@WesternEquipment]

I do not have long term experience with this particular machine since it is new to 2021 but I do have long term experience with John Deere equipment in general since I have been with Western Equipment for 8 years now. Some of these issues should be an easy fix. The Drive levers can be adjusted to make to mower drive straight. This adjustment process can be found in your owners manual and is very easy to fix. The ROPS also may just need to have a bolt tightened up to fix the noise and usually WD-40 or other lubricants will fix the sticky handles. I'm not sure about the armrest or the rust. But this mower does have a good warranty on it so I would definitely take it to your local dealer and ask them to fix these concerns because of the warranty you have. I can assure you that you have a high quality machine that will last you as long as you take care of it. I am sorry to hear of these issues but your local dealer should be able to fix you up. Let me know if I can help in any other way and thanks for watching!

[@djack41]

@@WesternEquipment Hustler FasTrac!

[@danielfrench7857]

What do you gain going from A 530M TO a R ?

[@WesternEquipment]

Stay tuned! We will be doing the Z530M vey soon! Thanks for watching!

[@jasonvortherms1167]

Will this mower handle hills?

[@WesternEquipment]

From my experience they do pretty well on hills but it all depends on the pitch and the type of grass or ground you are mowing on. Thanks for watching!

[@davidc4238]

Great video

[@WesternEquipment]

Thank you and thanks for watching!

[@iwanaGoFast2010]

Why no dealers have these mowers??

[@WesternEquipment]

These have been a hot commodity and are getting bought fast and some dealers are having a hard time getting inventory.

[@shanecorban9639]

The hydros are serviceable

[@WesternEquipment]

Good point. Thanks for watching!

[@jesseparbhu6125]

I have two questions for you. Are you going to do a mow an acre with this one any time soon? I have a 6 acre property so I'm averaging 4 acre to mow (open feild) you think this is a good fit for me?

[@WesternEquipment]

Yes we plan on doing a mow an acre when the grass greens up. I would say this or the Z7 series would be what you would want to look into.

[@jesseparbhu6125]

@@WesternEquipment thanks allot for the help and great content.

[@alexmartin1430]

Try and get a 9 series previous year that hasn't sold. 6999$ was my price

[@orchardmudtwin]

Dude, you gotta start it and ride it.

[@WesternEquipment]

I was hoping to get to do a "Mow an Acre" with this one but inventory is so scarce we are selling them before I even get the review video done. Thanks for watching!

[@RichsMowersNBlowers]

Good little video

[@WesternEquipment]

Thank you and thanks for watching!

[@RichsMowersNBlowers]

@@WesternEquipment is there a place where I can get a list of model number break downs

[@johnpatrick7957]

Very good video.........Thanks....

[@WesternEquipment]

Thank you and thanks for watching!

[@LA-zc9rg]

Meh they dropped the Kawasaki in the 540R for the Briggs in the 545R glad I have the 540R

[@WesternEquipment]

Well at least you still have the option of the Z530R if you ever decide to upgrade. Thanks for watching!

[@LA-zc9rg]

@@WesternEquipment good to know, I actually just saw that… I’m old school I don’t need an LED gauge and EFI especially from B&S on a mower.

[@JL-dp7vf]

If I can Convince my wife to buy me one now lol

[@WesternEquipment]

Make it happen haha! Thanks for watching!

[@kevinbcurtis]

Excellent

[@scottprimrose6966]

One of the downsides is the stamped deck ! What a shame. All other features are great but that kills the whole mower.

[@WesternEquipment]

What makes you say this kills the mower?

[@scottprimrose6966]

@@WesternEquipment Just cheap and not as durable as fabricated. They may have better air flow but usually they are not long lasting. One hit and they are toast. I think JD should up their game for this machine and use a fabricated deck since the price warrants it. Sadly everything about the machine is great except the deck and perhaps the light blades as well. For $8000 CAD you'd expect fabricated. I'd pick a BadBoy avenger or elite over the JDZ545R since they are build like tanks.

[@mrbubetube]

check this out, an E100 plowing snow. kzbin.info/www/bejne/aIXWamqro7t9Zqc I didn't think that was possible. I should check back with that guy next year and find out if his transmission is WRECKED hahahahahaha. I wonder why that Z545R isn't designed for adding a snow plow. Seems like such a shame to have such a big powerful machine and not be able to use it during the winter for snow removal.

[@WesternEquipment]

This would be interesting. Also, plowing snow with a zero turn would be tough since they have the front wheels that move freely. Good thoughts though.

[@kimsac1]

❤️👍👍👍

[@WesternEquipment]

Thank you 👍🏻

[@jackblack2321]

Kawasaki then Brigs then .................kohlet maybe

[@WesternEquipment]

Maybe, you never know when things may change. Thanks for watching!

[@lewishawks2258]

The paint is not no good and they need to come up with a floating deck

[@WesternEquipment]

Thanks for the feedback and thanks for watching!

[@MrJohndeere3720]

ship me 1 will ya, so i can demo it lol :)

[@WesternEquipment]

Haha! Wish I could! Thanks for watching!

[@MrJohndeere3720]

@@WesternEquipment ur welcome :)

[@cambellschunky704]

Any Briggs & Stratton fans and why?

[@WesternEquipment]

👀👀

[@stanleycrone7585]

350 hrs, the briggs will blow up

[@WesternEquipment]

Hmmm. What makes you think so?

[@percellegary]

X

[@WesternEquipment]

??

[@shanes481]

Non serviceable transaxles... Pass.

[@WesternEquipment]

Totally understandable. Thanks for watching!

[@oldkicker8958]

I have had three of them. There are drain plugs so yes they are serviceable. Just no filters that I know of.