2021 Kawasaki 650 delkevic exhaust install

[@dswagg2k10]

This video is to GOAT! I've seen other videos and they took apart waaaaay too many parts. Thank you so much Will.

[@kcusima3225]

Hello brother, quick question all the way from Australia, did u apply the supplied glue in the gaskets before slapping them on? Or some kinda greese that u put on? And also did u apply the glue on any parts of the connections?? Thank you

[@MrJeffbeth2]

Great vid!! Used it to install mine as soon as it was delivered!!

[@MWILLPOA]

Appreciate it..post a video to show the world.

[@TheTERMlNAT0R]

Ok, Ok. Im about to install mines from this video. Im a bit nervous. But if you did it. I can

[@tylerarnellhampton]

Check out that Black Widow exhaust for the ninja 650

[@MXMafia13]

Hey great video. Did you ever get it tuned or anything? And are you still riding it like that? Just asking because i just installed this exhaust on my 2023

[@MWILLPOA]

No, I didn't get it tuned. And yes, I still ride it.

[@MXMafia13]

​@M WILL TV nice thanks for the fast response. Ride safe

[@MWILLPOA]

Make sure you subscribe for future bike videos.

[@CoreAB]

@MXMafia13 Hey question dude, I wanna install it aswell on my 2023 but Delkevic support told me that it's not possible because the 2023 model changed their headers. Did that problem occur for you? Or did it just fit in and work perfectly fine?

[@LaShonteMayfield]

Did you do any tuning afterwards? Do you recommend? If so, which tuner (e.g. Power Commander, Bazzaz, etc.)?

[@MWILLPOA]

No I didn't

[@rossum3451]

Good news boys. The 2021 delkevic fits the ‘22 ninja 🥷. Just put it on no problem. Half the cost of yoshi alpha and it sounds really good. I’d compare it to a 450 dirt bike.

[@MWILLPOA]

Congrats

[@marlonbatiste4715]

Did you have to change the air filter or put a ecu flash on it? Reason why I ask I just put mines on same year bike and I have a check engine light on??

[@MWILLPOA]

No I didnt

[@MOB469-g4p]

Call delkavic and ask them for the right fitting. Same thing happened to me. Took them a week to send me the right adapter

[@1986willyg]

Great video i just bought the same bike today and they are too quiet from the factory....just subcribed keep up the videos

[@MWILLPOA]

Thanks. How do you like it.

[@1986willyg]

Its great my favorite thing is the slighty more upright seating position i don't like to sit leaning to far forward like the super sport bikes

[@MWILLPOA]

Awesome. Congrats on your new purchase.

[@mclovin489]

Sweet video man

[@MWILLPOA]

@Mclovin Appreciate it. SUBSCRIBE AND SHARE.

[@verlindale]

Sounds much better

[@MWILLPOA]

Much better

[@dylanchandler2610]

how long did this process take you?

[@MWILLPOA]

A lil over 1 hour

[@LyfeOfAStoner]

Did you have to tune it after adding the exhaust? Like an ecu flash or power commander?

[@MWILLPOA]

No I did not.

[@LaShonteMayfield]

Did you keep the baffle in, or remove the baffle?

[@MWILLPOA]

Kept it in

[@shaunnanton929]

ive got the same bike with the same exhaust but havnt installed yet. sounds great, as the stock dont sound nice at all

[@MWILLPOA]

Yeah, the stock sucks.

[@LucidSlynx]

Honestly just bought a new 2022 ninja and sounds electric with the stock exhaust

[@markknight9761]

Sounds nice! Did you find your check engine light came on after installation?

[@MWILLPOA]

It did not come on after installing.

[@marlonbatiste4715]

Changed mines on a 2022 ninja 650 and mines came on. Any idea what’s causing it? Mechanic saying I should change my air filter and or do a ecu?

[@91jettavw]

​@@marlonbatiste4715 did you ever figure it out?

[@SaberX009]

how your bike sounds now did you flash Ecu after install ??

[@MWILLPOA]

No

[@SaberX009]

@@MWILLPOA ok i’m definitely going to buy this !!!!!! it’s sound amazing

[@MWILLPOA]

Appreciate it. Why you stop moto vlogging.

[@SaberX009]

@@MWILLPOA just got my new Macbook and new go pros got some new videos coming next week BIKELYFE !!

[@MWILLPOA]

@@SaberX009 cool, just subed

[@patricklefalchier6465]

What did you use to keep the brass gaskets in. Mine aren’t sticking in there

[@MWILLPOA]

Should had came with the silicone

[@classicjesus]

How did you get the o2 sensor on there bro

[@MWILLPOA]

I had no issue.

[@classicjesus]

@@MWILLPOA yup i got mine on bro went on easy

[@ceseijitsu]

Thanks for posting I have the crimson red 2021. Congratulations on your bike. Have you noticed and performance negatives or loss in gas mileage? Thanks again for sharing the factory sound of course sucks. Ride safe

[@MWILLPOA]

Thanks. I really couldn't tell you cause soon as I purchased, I changed the exhaust.

[@ceseijitsu]

@@MWILLPOA gotcha thanks for the response

[@DonnieRayyy]

Ceseijitsu have you installed your exhaust yet?

[@ceseijitsu]

@@DonnieRayyy no sir, still debating on doing this winter. I think I'm content with the factory. I feel lame for saying that lol. But it's not ugly so I think I'll get heated gloves instead.

[@DonnieRayyy]

@@ceseijitsu I've been thinking about doing a exhaust just for the sake of better breathability. I don't think its lame either way

[@donproduction6248]

Nice bike! I was gonna get it but hate the way it sound. It sound like a small tractor even with an after market exhaust. I will get the 2021 cbr650r it more expensive but I don’t need to spend money on a new exhaust since the stock sounds amazing because of that 4 cylinder engine.

[@MWILLPOA]

Thanks..the cbr are nice as well.

[@Mark_conor]

spending more for sound 🤦🏽‍♂️ makes alot of sense

[@CJ-222]

Zx6r 🤷

[@donproduction6248]

@@Mark_conor sounds is only one of the reason there’s the look the performance the reliability of Honda engine ect think before you speak you’ll sound smarter.

[@yna007]

Yo bro my 02 sensor doesn’t fit any suggestions?

[@MWILLPOA]

@ymYNA007 idk mine fit without no issue

[@thomasanastasopoulos5413]

Would it fit the 2014 model?

[@MWILLPOA]

That idk

[@reshardmunroe8264]

Hey man I have a 2022 ninja 650 will this fit mine?

[@MWILLPOA]

I know the specs say 2017-2021 so idk about the 2022

[@ezurmnd]

Its the same enjine only thing that changes are the colors

[@XENO-pj8cm]

How do it shoots flames bro ?

[@MWILLPOA]

You must didn't watch the video

[@mad9111984]

Is that with the muffler/ DB killer in it?

[@MWILLPOA]

The DB is still in

[@MrJeffbeth2]

Forget to ask baffle in or out?

[@MWILLPOA]

In

[@MrJeffbeth2]

Did you reconnect o2 sensor?

[@MWILLPOA]

Yes

[@MrJeffbeth2]

@@MWILLPOA ok cool thx! Just ordered from Amazon and will be using your video to install.

[@MWILLPOA]

@@MrJeffbeth2 let me know how it turns out

[@jeremythompson829]

Where did you find the exhaust I can't find that one anywhere

[@MWILLPOA]

Ordered off amazon

[@joemommaganja]

man thinkin about upgrading to this from my cbr 300 , any thoughts ?

[@MWILLPOA]

I'll say go ahead, it's an nice bike, I like it.

[@Cj_cbr600rr]

Zx6r

[@joemommaganja]

@@Cj_cbr600rr i got the 650 , not the top end i was looking for prolly gonna be on a zx6r here soon

[@MWILLPOA]

Yeah, I think I may upgrade next year.

[@joemommaganja]

@@MWILLPOA hell yea brotha , 650 is a torquey son a bitch but i want that top end!!

[@mannypallchizaca7194]

What’s the name of the exhaust?

[@MWILLPOA]

Delkevic....check it out in the description

[@colbyd.5044]

Rev that shit up man why do people change exhaust and only hardly show idle in videos

[@dswagg2k10]

My only problem is my air flow sensor acts like it doesn't want to fit. I've tried putting the sensor first to the connector, then the connector to the header. Then I tried putting the connector on first, then put the sensor on. Both do not work. Any idea on how I can fix this? SN: I'm hoping to have resolved this by the time somebody actually responds lol.

[@MWILLPOA]

I really didn't have a problem. Just try to get the sensor wire as loose as possible so you can have some wiggle room.

[@dswagg2k10]

@@MWILLPOA Got it. Done. WAS BLOWN AWAY!!!

[@MWILLPOA]

Make sure to hit that subscribe button.

[@MrExpert2U]

@@dswagg2k10 how did you get the O2 sensor to fit?

[@MrJosephbussy]

Good evening brother! I have a question, I bought the same exhaust (stainless steel) but I'm kind of puzzled, what did you do with the O2 sensor on the new exhaust? I didn't see you put the O2 sensor on the new exhaust and the hole is to big for mine, I may need to send it back.

[@MWILLPOA]

The 02 sensor fits right in. I did not do no alterations.

[@MrJosephbussy]

@@MWILLPOA for some reason mines didn't fit in, I tried is there something I'm not doing? I have a 2022 kawasaki ninja 650 is there any difference?

[@MWILLPOA]

The feature specs on the one I ordered shows 2017-2021. I don't think it would be much of a difference on a 2022.

[@MrJosephbussy]

@@MWILLPOA i ordered the wrong one lol smh

[@MWILLPOA]

Damn, let me know how it turns out.