2021 Kioti CK2610 HST Cab Diesel Tractor Snowplowing

Рет қаралды 45,232

Күн бұрын

Watch my Kioti CK2610 HST cab plow through 1 foot of snow. Near L’Amable Ontario Canada. Nice and cozy in the cab.
Starts in the cold Canadian winter no problem.
I have owned this 2 years now and love it.
#canadianwinter #dieselengine #compacttractor #dieseltractor #kiotitractor #ck2610 #snowplow #walcoblade #snowplowing #farmhousedesign #countrylife

Пікірлер: 59

@outboardfixer 11 ай бұрын

What a nice little rig.....

@freedomfilledlife 11 ай бұрын

So far pretty happy. I’d love to fill the wheels though. Wouldn’t be as tippy.

@freedomfilledlife 11 ай бұрын

I see you fix outboards. Had a 56 envi rude 7.5 fleetwin. Sold it and now regret lol

@outboardfixer 11 ай бұрын

@mfilledlife Oh, too bad. They were a great little fishing motor and all parts are still available for them...both OEM and aftermarket. Never thought about the tipping thing but I bet loading the tires would be a big help....in a few ways.

@Cummins6720 Жыл бұрын

My rx7320 is a beast with a zmi 8 foot pusher and land pride inverted blower. Pretty much cant stop it . Our laat storm was 22 inches. Half fluffy snow. Half wet snow. 12 hours for 126 driveways and 10 commercial lots. 4 tanks of fuel. Kept on pushing or blowing out driveways . I love it. Yet i work for kubota lol .

@freedomfilledlife Жыл бұрын

That’s awesome!! Is rx7320 a kioti or kubota?

@Cummins6720 Жыл бұрын

@@freedomfilledlife kioti. Kubota comparable machine is the m4-071 .

@freedomfilledlife Жыл бұрын

@@Cummins6720 supposed to get 8” today.

@scrambler69-xk3kv 8 ай бұрын

Plowed working for a local school district for 35 years and I would have never left a mess like you did. I prided myself on plowing clean.

@patrickwilliamcasey9893 Ай бұрын

Hey freedom, Do you have a regular bucket attachment for the machine as well? sometimes I find that implement is literally easier and simpler to use especially with deep snow. yes it will dig in if not used carefully, but it also scrapes very nicely and can stack snow very high. May find wheel weights/chains to be even more necessary

@freedomfilledlife Ай бұрын

I do have a bucket. I’ve wondered that myself. I guess it’s mainly because I bought this that I feel I should use it. But it’s true, it’s not used very much. My little old 300 Honda atv is also really fast. I guess also a back drag of the bucket would work well too.

@tractortyme Жыл бұрын

If you have chains and some weight in the back, it would really make a nice push of the snow. I have a same type dozer blade.....but it's 86''. Works great, but I'm gonna add some ballast fluid in my rear tires too. Seems like the CK2610 has quick hydraulics?

@freedomfilledlife Жыл бұрын

Yes I’m thinking fluid too. My blade always bounces forward though, so I’m gonna do that pipe thing to it

@larryumphfrey3880 Жыл бұрын

I was wondering if that tractor would be a good one, and it looks like it is. I don't need anything bigger so i was looking at that one and Kubota, but I'm really impressed with the Kioti.

@freedomfilledlife Жыл бұрын

So far so good. We have 30 acres and it’s worked well for many tasks.

@blueglide1 11 ай бұрын

I have a Kubota B2601, open station,wished I had that cab!

@freedomfilledlife 11 ай бұрын

@@blueglide1 definitely worth it for snow, cold, bugs

@2bouchard Жыл бұрын

How is your loader tolerating the blade stress when angled? My dealer advised against anything but a straight implement, so I am curious. I have a ck2610 as well.

@freedomfilledlife Жыл бұрын

Seems decent. The dealer sold it too. Now you have me curious though. Maybe I should just dig with it

@christophercharles3169 10 ай бұрын

A plow is nice and cheaper by a long shot I'm assuming but give me a blower every day and twice on Sunday. I just bought the CK2620.

@freedomfilledlife 10 ай бұрын

After having a plow, I totally agree. I definitely also need sliders on the bottom of the plough like a few people mentioned below. A blower would make such a quicker job. That’s why sometimes I just use the ATV for small stuff. The tractor is just a good all-around yard implement, but ploughing with a blade is a bit of a pain.

@christophercharles3169 10 ай бұрын

@@freedomfilledlife I get it. Use what you have. Blowers aren't inexpensive. I'm hoping to acquire a blower by the start of next winter. Otherwise I may be using a plow or even the bucket.

@spyder000069 Ай бұрын

@@freedomfilledlife I use a standard rear grader blade to clear my country gravel driveway. I spin the blade 180 degrees so its backwards which means the front is curved. This still pulls the snow fine and it doesn't grab the grass and gravel as much. I've been thinking about a front plow setup like yours but it is hard to beat the simplicity of just attaching the 3 point and going. Less to go wrong. I only need to pivot the plow a couple of times so not a big deal for me to jump out of the tractor to do that.

@allanwilson5064 10 ай бұрын

I see you didn't get all of the plastic out from around the seat. Just like mine... lol

@freedomfilledlife 10 ай бұрын

I know I’m still wondering how to do it. Poor design lol

@fredhinck9685 Жыл бұрын

Put a piece of 2 1/2 inch sched 40 pipe on your cutting edge. Have the same blade on my Massey 1742.

@freedomfilledlife Жыл бұрын

You mean on the bottom so it doesn’t dig in too much?

@fredhinck9685 Жыл бұрын

Yes, makes a big difference. Still can't leave the loader in float though

@freedomfilledlife Жыл бұрын

@@fredhinck9685 yes that’s one part that’s not good. The constant up and down. Mind me asking how you put the pipe on?

@CowboyPants-h5p Жыл бұрын

@@freedomfilledlife I'm in Nova Scotia. I put a 84" length of schedule 80 PVC on my HLA 2000 plow/Kioti 3510 setup. Makes plowing gravel driveways real easy. I simply put the pipe in a workmate vise with a backing board and ran down the length with a skil saw. Then banged it down the length of the plow edge with a sledge hammer on one end and the wife holding the other end making sure it did not slide off. DO NOT use schedule 40 pipe as it is WAY too thin and will break on the first really cold day. Trust me on that one. The BEST solution would be to use a length of 2" steel pipe. Good luck!

@CanadasOceanPlayground Жыл бұрын

I have the 23 CX2510 Cab with HLA100 66” blade Hydraulic with 3rd Function. Loaded the tires and bought a ballast box ( 3 pt) and put 5-66 pound bags of sand . Have a paved drive with last 75 feet at 8% slope. Pushes the snow up no problem never spins a tire. 😊

@michealwhynot Жыл бұрын

Put some feet on the plow and put into float mode

@freedomfilledlife Жыл бұрын

I did try that, but still seems to dig in. Such a pain lol.

@inspectr1949 Ай бұрын

No skid shoes on the plow?

@freedomfilledlife Ай бұрын

Yes I need to add some on. Any good links to add to the bottom of the straight blade?

@inspectr1949 Ай бұрын

@@freedomfilledlife Adding cutting a slit on 2 1/2" ABS or SCH 80 PVC and adding o the bottom seems to work from my research, have been in the market for a snow blade, FB market place has them very reasonable but most don't seem to come with skid shoes for whatever reason, some say skid shoes aren't even very effective on grave or crushed stone surfaces. Have no idea how to add them as I don't weld.

@freedomfilledlife Ай бұрын

@@inspectr1949 OK sounds great. Yes I have the normal round iron skin shoes but they are brutal on non-even surfaces. I believe they would only work on flat asphalt

@inspectr1949 Ай бұрын

@@freedomfilledlife Did buy a new plow that didn't come with skid shoes (price was right) but Amazon has after market ones that bolt on although I think I'll get someone to weld them.

@freedomfilledlife Ай бұрын

@ yes, welding is always better

@davehudson4607 6 ай бұрын

Worst thing you could ever have on a loader, a blade that can angle. Loaders are meant to push straight, many a person has bent a front end loader from what you have been doing. Good luck, get a snow pusher or a blower

@inspectr1949 Ай бұрын

Interesting is that fact?

@davehudson4607 Ай бұрын

@ That is straight up from my dealer. Actually from two dealerships.

@TheRistopher Ай бұрын

Weird so the plow has a bracket at the quick connection, that's attached to a plow. I can't use the bucket to push into side material with the bucket that's to the same system. 😂