2021 polaris sportsman 570 primary clutch seal replacement

my 2021 sportsman 570 belt was slipping even when only going through a few inches of water.. turns out the seal behind the primary clutch was all torn up.

[@nombr]

Good video man, I’ll have to check out my seal. Another thing I did was reroute/half as snorkel the cvt exhaust. Lots of guys online have said that will take in water from time to time

[@4x4_quad_rider]

Thanks buddy! Ive been thinking about relocating the cvt exhaust but even submerging the actual muffler i have yet to get so much water in there that it slips

[@jasonjones5411]

Is it possible to use the removal tool for the whole primary clutch? Keep it from separating and pull/install with it all together? I have a 12" grade 8 threaded rod so it's long enough. (The pcp-25 is apparently on backorder)

[@farchambeault]

Couldnt you use the clutch puller without taking the primary apart?

[@farchambeault]

And for everyone asking, the ebs with p90x clutches (21-23) uses epi pcp-25 clutch puller.

[@jasonjones5411]

hey @farchambeault, do you know if there is any issue with pulling the whole primary clutch together? I have a 12" grade 8 threaded rod since the pcp-25 is on backorder. Was hoping that would help keep things together and somewhat aligned. I just wasn't sure if there was another reason why they had to separate

[@farchambeault]

@@jasonjones5411 I don't and I'm trying to figure out the same answer. The guy I normally take my stuff to says you should just be able to put the clutch puller through and pull everything in one piece

[@jasonjones5411]

@@farchambeault I'm planning on using a clamp to keep things together as it comes off and using this threaded rod. Will try later today and let you know

[@farchambeault]

@@jasonjones5411 keep me posted. I'll be curious to know your results. Freaking Polaris.....

[@jasonjones5411]

Don't do it - primary needs to come off first. otherwise you will destroy the helix drive. Now my all thread is stuck and hopefully didn't damage anything else. :( @@farchambeault

[@omarcaban9917]

Thanks for sharing is this a common problem?

[@4x4_quad_rider]

Not sure if it's common or not. This one was wrecked and I'm thinking that tore the seal.

[@borisbucifal5596]

Hi, great video, did you find out maybe the number of the tool?

[@4x4_quad_rider]

Call a polaris dealer or google polaris primary clutch puller.

[@evanhovis2705]

What’s the part number for that seal and where did you get it

[@4x4_quad_rider]

Im not sure buddy, i called my local polaris dealership and they gave me the number and a list of places that had it in stock. It was pretty difficult trying to search it online

[@stan-sorincapota8088]

Polaris 5418251

[@jamiewicks2153]

What is the product code for the clutch puller?

[@4x4_quad_rider]

Not sure man i just called the polaris place and bought what they said to get. Therrs cheaper ones on amazon but the price difference wasnt that much

[@jamiewicks2153]

@@4x4_quad_rider cheers man

[@bigboysnorkels4961]

Man you should have went ahead and high temp siliconed both sides! And put a tie strap around it on crank!