2021 Yamaha Rmax 1000 Inferno heater install and Weller Racing tuning and clutching! Many updates!

[@nelsonscattabingus5751]

For damn near 30k it should have it factory!

[@jhmotorsports7692]

Agreed

[@mtcentral]

How does that backup camera work. Is it hooked into the Yamaha screen ? Lots of good mods man

[@JGard417]

If you get that 3d print to work for the tablet ill buy one

[@p0weraid]

Can you open the doors when the windows are on

[@kevinmcdonald1917]

I put an HMF exhaust on mine along with the Weller flash. It is a great combo!

[@danielcad23]

Im liking this better than the can am maverivk

[@ASUSfreak]

When I did the clutch weights on my Grizzly 700 I put grease on the weights themselfs also? Is that OK or not? Not that it matters anymore for the Grizz, cause I have a RMAX2 soon, but just wondering... Greetings from Belgium and I sub'd for this vid

[@goodtalker]

You got rid of those shoulder safety items...any pics of where you cut them?

[@imbatman9176]

The coolant "y" that you use to tap into the coolant lines, are they 1 inch into 5/8?? Do you know?

[@ruapayne2]

Can I get some help? I bought the stuff you used for the turn signal and took it all in to the professionals and they couldn't figuare out how to hook it up. Could you possibly walk me through how to hook it up? They ran the lights from the back to the front, but then didn't know how to connect them.

[@ruapayne2]

@@jhmotorsports7692 I figuared it out. Thank you!

[@rtoney8354]

Bad ass setup. I just bought the RMax 4 1000 XTR last week...have not even drove it yet. I installed the Yamaha heater kit that ties in with a new thermostat block/housing. Everything else was the same but the heater box is bigger. I like the inferno better. I want to do the enclosed cab kit and the block offs for the inner fender wells before taking it out. I also have a Polaris 800 S trail I just put tracks on for the time being. I really like all the mods you have done . That is the fun part of building a machine, to make it your own. Keep up the good work and post more videos

[@peterpann9619]

Are the seats adjustable, how much leg room and does it have power steering? Thanks

[@peterpann9619]

@@jhmotorsports7692 thanks

[@phillipkuntze137]

Have you guys had any issues with mud and water on your blower motor for the heater?

[@davehenneman2298]

To funny an inferno heater install video that doesn’t get to the heater until 15 min in. Shows you draining the antifreeze and then cuts to the heater completely installed. Excellent video. Very informative. 👍

[@limbandtreeremoval]

Love the vid

[@alexballi289]

hey man, relly nice setup, half of those the accesories i'm putting on mine now, are u planing on selling the adventure pro?

[@jhmotorsports2]

He would sell it but not many people are wanting it. I think most are upgrading to something better.

[@alexballi289]

@@jhmotorsports2 witch one did u guys used?

[@natcollins74]

Is there a video of you removing the shoulder pads?

[@natcollins74]

I know it looks way better without them but how’s it feel inside with them gone ?

[@mikecarr9923]

What kind of wiper motors did you buy?

[@jhmotorsports7692]

He used the alpha wipers. Thanks for watching.

[@jacobchase9757]

Did the new door speakers and head unit just plug right in?

[@cyaups1]

I find your video informative and it is obvious that you have invested some time and money into your machine. I just picked me up my 2022 RMAK XTR 2 seater and I am starting to customize it. My question lies in the soft door enclosures and after visiting with the manufacture and discussing the way you installed them on your machine the manufacture said that I wouldn't be able to trailer the vehicle in an open trailer with them installed that way. I would love to know your thoughts/first hand experience pertaining to this. Thanks for making the video and sharing.

[@jhmotorsports2]

I wouldn’t run it down the highway like that but the machine goes 40-50 mph on the trails and no issues. It gets pulled in an enclosed trailer so I’ve yet to cross that bridge honestly. Thanks for watching.

[@cyaups1]

Thanks for the insight, I will plan accordingly. Have fun on the trails😎

[@nickaa121212]

Good looking rig.

[@mrmatty74]

What are the smaller light pods just below your headlights? Looks like there are 2 below each headlight?

[@timmyphillips9023]

What is the model numbers for the Rockford Fosgate radio and speakers? Nice setup!!!!

[@timmyphillips9023]

@@jhmotorsports7692 did the Rmax handle the 32 inch carnivores okay or is that the reason for the Weller tune and weights?

[@krogunlimitedfahrenkrog6110]

@@timmyphillips9023 my RMAX is on 33 boggers, and it has no issues bone stock! Only broken one axle so far.

[@wreku]

@@krogunlimitedfahrenkrog6110 would 34s fit you think? I wanna go 34 xm310s so i can run a 20 inch wheel.

[@krogunlimitedfahrenkrog6110]

@@wreku Honestly, it depends on the tire. My 34x10r17 out and back max would fit, they measure the same as my 33x9.5r20 boggers. If you get much more than 33 measured height, I would bet you will run into clearance/rubs I'm going to build high clearance/forward arms later this year and likely market them after thurough testing (limited qty), I'm going to go with 35's and build some room for different tires. I don't think the RMAX will have a problem with them!

[@stewartwomack7086]

What's the block off plate for?

[@jayminer9416]

Tusk seat heaters?

[@svt89]

What’s top speed now ?

[@timgile8144]

How much dust does the heater blow out being mounted under the seat and drawing air/dust from rear tire?

[@blackjack604]

What would be the advantage to having a tablet over the adventure pro?

[@craigr6763]

What did the cover and tube do?

[@ruapayne2]

Most street legel kits come with a horn. Since you did yoir own what horn did you use.

[@canamdennis6829]

That my friend is the sweetest R MAX I have seen yet nice job bro looks really really 👍 good

[@mitchdesmarais910]

thanks for sharing all your mods. When you do the adventure pro change out for the samsung, would be great if you can post the steps. We cant get adventurepro in Canada and would like to throw in a tablet.

[@xgumbix1]

I know Yamaha is quality, but they designed this machine terribly. Mid engine, having to tear it apart to access the clutch and terrible door design are deal breakers for me.

[@jhmotorsports7692]

Totally agree

[@chriskocienski3601]

What did you do for the seat heaters? I was cheap and just bought a plug in heated seat cover from Walmart

[@dantadysak5485]

I put the Yamaha heater in mine the day after I got it in January all I can say is it’s very nice to have heat! Sucked putting it in though it’s a lot of work

[@dougwathor729]

Just curious as to what advantages are you getting out of the Samsung tablet over the Adventure Pro?

[@dougwathor729]

@@jhmotorsports7692 thank you for the response! If you get enough interest can you show how you mounted your new device.

[@daveb7206]

Couple of questions rewatched your video....... 1) what side soft covers are those? 2) will that inferno heater install work with a sub woofer base speaker in that location? 3) are those bead locks on the OEM rims? if so where do I get those bead locks? 4) What tune setting did you get? Does it still run high level octane setting? Sorry for so many questions but you guys did a lot to this machine and covered a lot thanks for sharing this great video and info./....

[@mitchdesmarais910]

any chance you can post the link for the EMP brackets for the light bar? Ordered the same lightbar (thanks dor link) but cant find the brackets online.

[@mitchdesmarais910]

awesome thanks again

[@todds5956]

Is that the oil bath primary with the 10k belt warranty?

[@wreku]

how did you mount the door speakers? u make a bracket or order one

[@nuaz55]

Do you know if The Inferno heater takes up the same space as the OEM heater? Hoping it still allows installation for the subwoofer and extra battery

[@caillamearl]

You ever run into problems with power? You got a lot of watts going out of the battery when you’re running the heaters and the stereo just wondering if power system keeps up to it all

[@billbuell6895]

Would love to know how you linked the sound bar and door speakers to the head unit? Does the sound bar have a rca input? Most I have seen are bluetooth and maybe a 3.5mm aux jack. Great looking machine btw and thanks for any feedback.

[@trail_shark6078]

did the clutch and flash help reduce cabin noise?

[@tonez7815]

Seeing mixed reviews on the inferno heaters it seems.you have one in the general right?does it heat your cab well?

[@fletcherquigley1790]

Any chance you can tell me what wheel size and offset on the Sedona’s, trying to run the same for mine.

[@ximer21]

@Jeremy Hamill Quick question for ya.....looking to purchase an rmax....one small problem, just purchased a double axle trailer less then a year ago and its 63 1/2" wide....according to the specs its 64" wide. Is it actually 64" wide stock? if not in the video u talk about changing the rims or offset to bring it down to 63? Can you let me know what kind of rim i need to do that? I know nothing about rims and offsets....any help would be greatly appreciated!! Thanks in advance!!!

[@billcornell7225]

I'm considering an RMax4 & find it interesting to view what mods other owners choose....good ideas. I see you have a taste for fine old muscle cars too...I had a '71 Formula 455 (from '72 -'08)...great hwy cruiser that is still on the road today with a different owner.

[@daveb7206]

Question: do you clean out the grease and tink seal everything? I thought those 22 g weights are greaseless ?

[@MichaelJHathaway]

Greaseless is much better as long as you use the HV weights and carbonfiber camplate sliders. TinkSeal is an option, but is not necessary on the RMAX clutch.

[@MichaelJHathaway]

@@jhmotorsports7692 I am the manufacture of clutch components for Weller Racing.

[@phillipkuntze137]

Dude you did some awesome mods! I got a kick out of you mentioning that you wish Yamaha would make a removable skid plate, I thought the same thing and then contemplated cutting all the welds out and creating one myself LOL

[@calebphilbrook8273]

Those Fender Flares look stealth, where did those come from?

[@aarongrapko9618]

hey thanks for the video, i have the exact same model, have you dyno'd to see how much gains made and can you post the wheel rim offset info and tire size? i see 32's (looks much better) nice job man, but did you stick with 14"rims? exhaust tip make a difference in low end growl? thanks AyAyRon

[@aarongrapko9618]

@@jhmotorsports7692 thank you!

[@aarongrapko9618]

@@jhmotorsports7692 sorry I forgot one thing Have you bottomed out on the plastic fenders or panels with the larger od tires?

[@aarongrapko9618]

@@jhmotorsports7692 lol have you bottomed out with the 32’s on your fenders and trim?

[@aarongrapko9618]

@@jhmotorsports7692 thank you

[@10cosmic]

im looking for this info but you deleted your replies?

[@malibu3148]

Does Shane have his own social media thread...maybe IG or FB? Just picked up my RMAX and his by far has the best mods which I would like to copy. Keep up with the awsome videos!!!

[@malibu3148]

Yeah. If he doesn't mind I will supply my email address and go from there. Would be awsome to discuss ideas back and forth.

[@malibu3148]

Cool...I will await a reply to confirm. Thanks again

[@malibu3148]

@@jhmotorsports7692 Found him on FB...

[@malibu3148]

@@jhmotorsports7692 Thank you

[@vaijem]

Did you use only 1 flasher, and where did you plug that in?

[@markgiraldes4062]

So I hope to enclose my Xtr and get it heated so did you run a thermometer test yet uncool wet conditions and how does your bead locks do in the snow aired down ? Thanks sweet ride 👍😎

[@markgiraldes4062]

@@jhmotorsports7692 so can you disclose costs for your inferno kit or some of the other mods you’ve done ? 🤔

[@BarnStangz]

Sweet looking rig for sure, might have to steal some of these ideas for my XT-R! That Alpha windshield is sweet, but why didn't they give you stainless mounting hardware? Am I seeing a bit of rust? That would drive me insane! Looking forward to seeing your 3D printed mount for that Samsung tab, should be cool! With that Hunterworks tip, does it just sound "better" no louder? Would be nice for more of a deeper sound. Everything came out nice, I'll have to send my ECU to Weller to get the flash, did you notice a difference?

[@BarnStangz]

@@jhmotorsports7692 Thanks man, I'll have to get that tip. In for a penny in for a pound with the cab noise for me I guess. It's loud, but I can live with it. Like the idea of a deeper sound with that tip. And I'll for sure get the tune, it'll be nice to have the machine running a tad bit richer too.

[@davidclayman1090]

What brand and type are the windshield wiper motors? Where can a person located them as well as the washer reservoir and spray nozzles?

[@davidclayman1090]

@@jhmotorsports7692 I watched this video several times and checked the Alpha website several times before submitting my initial question. I have watched it again between 3:09 and 3:54 time frames. I knew the windshield was Alpha. The wiper arms and wipers on the outside of the windshield are Alpha. Alpha does not offer electric motors at all much less for this particular windshield and machine. As far as Amazon, there are countless motors for windshield wipers and countless windshield washer kits. My initial question 4 days ago and again today is what brand and type are the wiper motors as well as the reservoir and spray nozzles? Having this information I could easily purchase from Amazon. It would be much easier to locate and buy the first time knowing what the person in this video purchased. Not just trial and error buying and returning items that do not work. What he purchased works with the RMAX and Alpha windshield combination. Thanks

[@davidclayman1090]

@@jhmotorsports7692 Okay. Thank you.

[@pauloyoshizaki2103]

YAMAHA ; RMAX4 ; 1.000 ; (4x4 ) Rodas ; Topa - Tudo ; Ótimo !!! Fazendas : Sítios ; enfrentar : Trilhas ; Terras ; Barros ; Lamas ;Montanhas ; Pedregulhos ; Cascalhos ; Pedras ; Participar : RALLY - DAKAR : Ano :2023 ~ 2024 ; Categoria ; Pick - up ; Pequeno ; Super : Vai ser Muito Bom !!! Ano : 2023 ~ 2024 : Top ; Rally ; Yamaha ; U.S.A. .....

[@littleshopofjeepers2036]

Do you have links to the turn signal kit you bought?

[@JH-tc3yu]

That's not gonna defrost worth a shit

[@Holdem669]

How did u pair the sound bar to your 6.5 ?