2023 CanAm Maverick X3 DS SuperATV Bumper Install PT1

[@drmarkintexas-400]

HAPPY New Year Thank you for sharing 🤗🏆🇺🇲

[@GarzaGangAdventures]

Happy New Year Dr Mark!

[@anthonysanchez3741]

Did you use the factory nuts and bolts from can and or super atv bolts the 4

[@GarzaGangAdventures]

I used the factory bolts, and lots of loctite lol. I wanted to used the supplied bolts, but you would have to remove the front diff. I got lazy and worked around it. Not the best way to do it, but I have kept an eye on them all summer and everything is still holding...

[@anthonysanchez3741]

@@GarzaGangAdventures blue or red loctite

[@GarzaGangAdventures]

Red on those bad boys for sure!

[@mrtosh]

Great vid. Any issue with the upper left a arm bolt replacement? Did it hit the smart lok diff actuator?

[@GarzaGangAdventures]

Thanks! Yeah, it hits the actuator, CanAm could have reversed the bolt orientation and that would have easily solved it. I'm not exactly proud of it, but I just kept those ones in, and used some loc-tite. I plan on removing them completely to replace them, but I didn't at the time. Not my proudest moment, but I'll keep an eye on them for the short term, and make fixing a priority after break in.

[@angelasuncion8395]

you simply pull out the back bolt all the way .pull the front bolt as far as it go .removed the A arm in an angle and it will comes out. I did all my bushing a while ago .good luck .

[@mrtosh]

@Angel Asuncion that works to get the a arm off but not to remove the top passenger bolt. You need to remove the actuator or slide the diff back.

[@knighthwk]

You didn't have to drill those rivets. That plastic comes off with the bracket after removing the 4 nuts that hold it on.

[@GarzaGangAdventures]

That makes more sense!