2023 CF Moto Uforce 1000XL Street Legal

[@cameronlange3448]

Nice job! Very clean and looks factory. I am still shopping and deciding if street legal is something i need to do. This definitely helped!

[@BruceClark-g5y]

Do you have a video of you doing everything? I tried to follow you on TikTok but your account is private. I would like to do mines the same way this look great!!!

[@alvinsalter4802]

I plan on trying this setup as well. Thanks for sharing.

[@joshwilliams9122]

Best aftermarket signal install on the UForce I've seen. Agree with all your choices and still trying to talk myself (I mean my wife mostly) into buying the 1000XL. Bought a CForce 600 Touring in 2020 and love it but think it's time for an upgrade!

[@tjkramer15]

Do you have a full installation video for the rear lights?

[@BestG2024]

3 or 4 inch tail light? How'd you mount the blinkers? Thanks

[@laybricks]

I put a clutch kit in mine from RNG Performance. It helped a little but is still quite jerky. Wish it was smoother but I don’t know anything else to try. I suppose the heat isn’t such a problem in yours since it’s a xl. May be hot to passengers in the back. I have 720 miles on mine. Bought the full doors for it which made it really nice last winter. Didn’t mind the excessive heat then. lol. Hope you are enjoying yours.

[@Mr21dj]

Great video, Thank you so much for uploading it. I followed it and hooked up the rear directionals today. They came out wonderful. Thank you again

[@chrisgray1539]

Your welcome

[@LoganJudkins-yf9ws]

Did you wire to both tail lights to the brown and green from rear pigtail?

[@chrisgray1539]

@@LoganJudkins-yf9ws no they were separate wires at the tail light

[@ariesnc6320]

@@chrisgray1539Did you cut the lights down to be able to Mount them in that location on the front ?

[@chrisgray1539]

@ariesnc6320 yes. I cut the tabs and screwed them in directly underneath

[@mikeeikleberry7383]

Kennetic Kreations makes an awesome plug in play turn signal /horn kit for 2023 u forces!!! American people American made!!!!

[@jamesalbin6194]

You done a nice neet factory looking job and I like that.

[@chrisgray1539]

Thank you

[@darlenesalas6586]

Good evening there I just bought one and having a hard time figuring out the turn singles

[@joejansen6591]

Just out of curiosity, how much taller is that from factory? Could you measure the top of the cab to the ground? If you would i really appreciate it.

[@laybricks]

I installed the blinkers and horn on mine with the help of your video. Thanks for the help. Was wondering if yours is jerky when you take off from start? Mine is and it's really disappointing. It's also really really hot with the heat coming up from the seats.

[@chrisgray1539]

@laybricks the Jerky is from the belt. It will become less over time. U can eliminate it now with a clutch kit. As far as heat, never had an issue with mine.

[@randyv781]

What wheels and tires are you running? They look great

[@chasebolyard1962]

What is the other switch next to your horn switch?

[@aarongeissler5139]

I did something similar but couldn’t get mine to work without running a new ground wire. Would have rather just used the factory ground. Any ideas where to check factory ground for an issue?

[@stevecramer517]

I am picking our up this week can’t wait I am going to put the turn signals on also

[@chrisgray1539]

You won't be disappointed

[@mikestaub500]

Very clean install! Would appreciate a little more detail on how you got the wires into the tailgate without them getting pinched when opening and closing it? Thanks!

[@chrisgray1539]

Shoot me ur email

[@CatherinePowell-ik1ty]

Can’t seem to find the lights on your Amazon link any other way to search

[@homeoftheislandsquirrel7185]

Can you please send me the link to the front blinker you used thanks so much

[@bbadamb8675]

I need it too. Actually, both Amazon links are cut off. Please share them. Thanks!

[@BIGKIDDO84]

I have wireing under dash I plugged turn signal in and still won’t work so you have to have hazard’s plugged in too ? And I don’t see a plug for a relay underneath either !!

[@zachhuckabee7108]

Any rubbing when using off road or while going through ditches, ruts, or turning?

[@chrisgray1539]

None

[@supermaga5351]

Awesome Brutha! Thank you for posting this. I did the lights in the front bumper cause I have an aftermarket grill guard would have blocked the area where you installed the lights into your front bumper. I was stuck on the rear because like you i didn't want to add a trailer harness and cut into the factory harness. Got the link for the rear lights. These should work perfect.

[@chrisgray1539]

Yeah I fully agree. I don't know why someone made it so hard by cutting the wiring to add a trailer harness when they were already two wires from the factory back there. This way its clean and looks stock.

[@supermaga5351]

@@chrisgray1539 - 100% agree. The link you provided had two ambers and two reds. Just bought them, and will also install the side marker lights. I had some old connectors off of a wide band, and the pins click into the factory plugs. I have looked for hours on amazon trying to find a solution for the the rear. This will work out real nice, and looks factory. thanks so much.

[@chrisgray1539]

@@supermaga5351 send me some pictures when you get the side markers on.

[@supermaga5351]

@@chrisgray1539 - Will do, lights should be here tomorrow, and will install them this weekend. Do you know how I can send pics? I have done a lot to mine, and am currently working on installing a double din stereo in place of where the cup holder is on the dash. Almost finished.

[@chrisgray1539]

Subscribe to my channel and I can dm you my contact info

[@Xitin1987]

hi Chris, I just bought mine exactly like yours and I just order all the switches to make street legal, How do you take the switch dash panel off?

[@chrisgray1539]

Two screws under the 5 switch panel. Then pull off. Lower storage just pulls off too.

[@boesenberg02]

What tires did you go with? Any rubbing?

[@chrisgray1539]

30x10x14 carnivore maxxis... no rubbing at all

[@anthonymatajac5431]

Nice set up bud, did you have to use a trailer converter box for the rear

[@chrisgray1539]

No

[@0991sirhc1]

How did you mount your license plate? Got mine in the mail today and tried mounting it, but it didn't fit. Please let me know. Thanks

[@michaelpalmateer1414]

How did you end up mounting the licenses plate light i just got mine in the mail today

[@olsmokey418]

What state are you in ?

[@anthonymatajac5431]

Tried to follow your links for the lights, it won't work

[@lbcredneck]

Do you have a clutch kit to run the 30” tires?

[@chrisgray1539]

Stock clutch. No issues

[@cameroneagle4370]

awesome , i want one

[@jakteel6743]

You have a 22? My 23 model the underplastic is too small to mount the lights on. Unless you have a trick on placement?

[@chrisgray1539]

Mine is a 23

[@jakteel6743]

​​@@chrisgray1539 did the light fit good for you? The wings coming off the side are too wide to fit nicely

[@chrisgray1539]

@@jakteel6743 I cut the wings off and screwed thru the light plastic

[@joshwilliams9122]

Was wondering the same thing... Picked up my 2023 last week and ordered these recommended lights but same issue, too wide to fit. Wasn't sure if the lights may have changed since the link was posted.

[@chrisgray1539]

Email me your info and I can send u a pic. [e-mail]

[@Firebuster106]

How did your mount the front turn signals?

[@chrisgray1539]

I screwed them directly to the under plastic

[@RDJEAGLE13]

Hey Chris can you send me the link to your tail turn signals please?

[@chrisgray1539]

It's at the bottom of the first thread

[@djdan1]

Amazon link not working for me.

[@nekoshephard1413]

I love you sit up I been trying to click on the link to order the light but I can’t click on it

[@chrisgray1539]

Links are on thread below

[@nekoshephard1413]

Ok I’m sorry thread below I’m lost I never get on this my kids me on your channel

[@joseramos7476]

Looks good, how do you like the UTV itself.

[@chrisgray1539]

I love it. Performance, Ride, overall experience is equal to its competition

[@terrythompson1660]

The links for the lights will not show,could I get the links

[@chrisgray1539]

I reposted the links on an older thread. They are there. Scroll.down below.

[@chrisgray1539]

I posted a video of the wiring on my tic tok. @mcgray76... will try to upload it here later

[@ariesnc6320]

Chris, I have a question, I have a 2023 XL and installed the OEM horn like the one you have. The switch lights up but the horn doesn’t sound. Did you have to adjust anything to get the horn to work ?

[@chrisgray1539]

@@ariesnc6320 make sure the ground screw is installed on the horn assembly

[@raybeasley5570]

Was there a pigtail in the dash for the turn signals? I have a 23 and it doesn't have the wiring in the dash

[@chrisgray1539]

Yes. Zip tied to frame

[@raybeasley5570]

Is it labeled "Steering Switch" in Chinese

[@BIGKIDDO84]

I’m having same problem got switch plugged in but won’t work so I’m looking for hazard relay but don’t see it

[@chrisgray1539]

@@BIGKIDDO84 hazard relay is under hood.

[@BIGKIDDO84]

@@chrisgray1539 I’ve searched for it only see horn plug which I’ve already installed and plugged in signal switch in it lights up but doesn’t come on in the dashboard

[@beaverbig70]

where did you find the turn signal wite behind the head light

[@chrisgray1539]

In the headlight wiring plug

[@beaverbig70]

mine don’t have orange or light blue in them and used test light on all and none flashed

[@chrisgray1539]

@@beaverbig70 send me your email

[@HeyItsAsmus]

You mean to tell me all of the plugs for the horn and turn signals are all ran but just plugged in to nothing....? lol C'mon Cfmoto. Just include it at that point.

[@chrisgray1539]

Yep. Fully agree!

[@matthewlowery6041]

I can’t click on the link for Amazon is there anyway you could post the links on this comment

[@chrisgray1539]

AT-HAIHAN Aluminum Housing Red Amber LED Trailer Clearance and Side Marker Lights, DOT Compliant Waterproof Surface Mount Front Rear Lighting for Truck Tractor Motorcycle Van RV a.co/d/9gaKE9b

[@chrisgray1539]

Anki HappiGo ANKIA Universal 12 LED License Plate Light Running Lamp Reverse Lights Tail Light Assembly for Car Trailer UTV ATV Truck RV Boat (Amber Light) a.co/d/8nARImW

[@matthewlowery6041]

Thanks!

[@chrisgray1539]

Your welcome

[@matthewlowery6041]

@@chrisgray1539 it’s the nicest aftermarket set up I’ve seen on one so far just ordered everything to do mine the same way

[@cameronlange3448]

Nice job! Very clean and looks factory. I am still shopping and deciding if street legal is something i need to do. This definitely helped!

[@BruceClark-g5y]

Do you have a video of you doing everything? I tried to follow you on TikTok but your account is private. I would like to do mines the same way this look great!!!

[@BruceClark-g5y]

Do you have a video of you doing everything? I tried to follow you on TikTok but your account is private. I would like to do mines the same way this look great!!!