2023 Ford H.O. 6.7 Powerstroke on a HUB DYNO - HAD ISSUES!

[@cherrychevys]

9:57 Look inside that left hub dyno before you have an expensive failure. Its arching at 9:57. It's easier to check it now than to wait until it locks up and eats an axle.

[@Sluezer]

When are you gonna do a pull in that 6.7

[@Cov930]

Don’t get me wrong I love my 99 7.3 f350 but I wouldn’t mind driving something like this though but not for a mortgage payment

[@stevenrussell5937]

who tf finances at full price? put down half at least...on anything

[@loofuspizano]

I traded my 19 powerstroke in and put 5 grand of my own and walked out only financing 68 out the door for the 2023 high output powerstroke 75 year anniversary

[@BusterChestnuts]

@@stevenrussell5937so still financing 50k means you’re giving someone else more of your money than the truck is worth by a long shot, and total purchase price is still that of a house in certain places. If you just took the 50k cash that would have been a down payment (or far less) you still could buy a very nice used truck and not give any financial institution your hard earned money. Is it really worth it to have the latest and greatest just to pad the bankers pocket? Trucks for the last 25 years have been able to do everything they need to and more, all within the confines of the speed limit.

[@BusterChestnuts]

@@braydenjohnston8820 Only makes sense of doing commercial work, and then it’s still probably not seeing 40k often.

[@bradthackston5217]

@@stevenrussell5937who has $50k just sitting around to put down? The people that actually use a truck as a truck not just to ride up and down the road take your kids to school and practice and never put a scratch in the bed can’t afford them because of the losers that have a small Johnson so they need the biggest truck they can get have cause the prices to become unaffordable for working people that need them and by your comment I’m sure you have a new truck on 40s that’s never seen dirty pavement let alone dirt on a job site what an asshole thing to say put half down not everybody has had everything handed to them there whole life we didn’t get lucky like you.

[@Tomrod07]

420hp / 1063 torque

[@Burroughsbikebuilds]

Decent…

[@ceementality]

@@Burroughsbikebuildswhat you meant decent that’s the highest out of any pickup😊

[@JeffreyPalma-y2b]

@@ceementalityseen 22s get 450+

[@peterf.4268]

The last 6.7 Powerstroke was underrated...5 Star dyno'd it stock & basicly got the same supposed crank # at the wheels...I'm gonna guess Ford is underrated this 1 too (tho not as much) & say, 460.

[@kronintime3612]

The frount wheel speed sensors on the truck are not reporting so the pcm is having a panic attack, you will have to pull traction control fuse too if you can, even if its turned off with the button in the cab.

[@Bowman210]

Yes 💯

[@jessetheribble3502]

dont think there is a separate fuse for traction control is there? if there is pleaseeeee lmk cause i have a 17 6.7 and i cant do nothing without pulling abs fuse lol

[@arod6789]

Holding the traction control button down 10 seconds disables most of it. I was able to dyno mine just fine.

[@DynoDieselWagon]

Just fartin around. Can't be serious.

[@DynoDieselWagon]

Without fuses ?

[@paullt5111]

Why you guys don’t use cooling fans? Under heavy load you need air for proper cooling

[@Tim-MCMLVIII]

That Cobra... 😳 I'd love to take that for a drive on one of these freshly resurfaced back country Georgia roads. It'd bring back some old Alabama MS runnin teenage years 😂

[@randysrestoration]

No update on the dyno numbers?

[@Bowman210]

Was the iat sensor relocated to the intake pipes?

[@ruvenramirez4358]

What a beautiful sound that Cobra makes.

[@MontanaWild78]

That is a sexy truck. That red with the black looks amazing. I love the headlights

[@tylerq2729]

Why get rid of the underhood fuel filter? Is it not really necessary? Just curious

[@jensenleblanc]

Fire hazard, the connections like to leak over time.

[@loofuspizano]

We’re ready to see aftermarket! I just got one of these ready to see what I can do to it but there’s not much out there yet

[@time_on_target]

Disconnect the wheel speed sensors that read speed at the hub.

[@arod6789]

Hold the traction control button down for 10sec. I dyno'd mine just fine.

[@billdeem2917]

Is suporting a vehicle by the pumpkin, a good idea ?

[@jaym.6081]

That cobrajet is wicked

[@armedprophet3321]

So what are you gonna do, not disconnect all the wheel speed sensors and completely all traction control ? We have been waiting for you to figure out what happened, most of us did 2 minutes after the video 😂😂

[@craigg4246]

poor test set up, they should have had fans blowing air thru the radiator and intercooler.

[@Alexander-fr1kk]

I think the GMC is the best looking truck - especially the front end - but the super duty is a good looking truck too.

[@collinhefley7392]

Need to get some of the new spe parts on the platinum.

[@kendalsherman5322]

Prediction 460 and 1120

[@MJA107]

472 hp i am calling it

[@jensenleblanc]

That guy in Idaho got 495hp in his tremor on rollers. Edge tested a normal 2022 and got 498 (not sure on the correction factor though).

[@MJA107]

@@jensenleblanc damn the ford's are destroying them gm's right now gm's what l5p 445 then the 6.7 shhhhoe

[@ElCompa_Mario]

That thing screams!!

[@OneSneakyGamer]

im gonna say 410HP/1105TQ

[@B-rad303]

These prices are insulting...No thanks

[@djberg3483]

Well that’s a little different dyno than the one Jesse windowed his block on after Rudy’s years back… Bummer on the new HO not liking the restraints lol

[@brandonhahaj1820]

I want to move to east and get a job at SPE 😂

[@lsx_hollis6471]

426/980

[@scottclement8747]

501 /1201

[@matejstivic5051]

420 maaaan

[@brianstrawn268]

488

[@markturner5207]

I just can’t get my brain around a 90k aluminum truck.

[@ceementality]

I agree with 90k but aluminum is goated

[@markturner5207]

@@ceementality I don’t shoot plastic guns and I wont drive a tin truck.

[@robotekusa]

thumbs down any dork who asks for likes and subs

[@dom.9527]

ofc it had problems. powerchoke 😅

[@mikeb769]

7.3 is the best motor ever made

[@dom.9527]

@@mikeb769 yeah ford is really defining tough with that one 💀

[@brandonwilliams567]

450/900

[@brandonwilliams567]

450/900