Dude changes trucks more than I change my underwear 😂😂 it’s a nice truck though. Can’t wait to see the limited
@RockyRohde Жыл бұрын
Limited has been ordered for two years now 😂. When I get this one it will be held for a while.
@wtwoffroad Жыл бұрын
Man that looks awesome!
@DouseAHouse Жыл бұрын
Beautiful truck!
@Utah_Trail_Rider Жыл бұрын
I put the 2.5" RreadyLift coil springs, Falcon Shocks and the AirIQ Logiq rear bags on my 23 F350 Platinum. I kept the 35x12.5r20s off my 2020 truck and will run those and probably replace them with LT295 tires. I don't need the 37" tires. I tow too much.
@atomicorang Жыл бұрын
You have a beautiful truck❤
@RockyRohde Жыл бұрын
Thank you!
@30546MB11 ай бұрын
How much did the cold air intake help with the turbo sound? I like hearing it a little as well. Can’t hardly hear it at all right now. Any chance of making a video?
@RockyRohde11 ай бұрын
I pulled mine back off truck.. Didn’t get much turbo noise but a lot of deep drone noise.. it’s not for me…
@connorbarnett7494 Жыл бұрын
What’s the part number to the tremor U bolts. I have the blocks but I’m not sure what the longer U bolt part number is.
@Precisiontigwelding Жыл бұрын
With the 1.5” ready lift do u not need to do a track bar relocation
@troy6227Ай бұрын
Do you use factory U-bolts when you put tremor blocks in or did you use stock bolts?
@RockyRohdeАй бұрын
Ordered factory u bolts with blocks
@kevindearbonne3768 Жыл бұрын
Any update on the when you’re taking delivery on the Limited?
@RockyRohde Жыл бұрын
Just got it a few days ago
@hellofreeman6653 Жыл бұрын
Dudes got some serious money! Mentor me
@dustinsayes28076 ай бұрын
Hi Rocky, thanks for making these informational videos. Curious, why did you go to firestone airbags, from the ready lift on your previous truck? Did you have any issues with the ready lift? Do you like the firestone bags better? thanks!
@RockyRohde6 ай бұрын
Both good sets..
@kevlabauve Жыл бұрын
Look at Attatank for aux fuel with a roll cover. You can get 45 gallons, comes with a pump and cycles your OEM tank when it gets 1/4 low to full. Takes up little bed space, works with a fifth wheel. Has a shut off switch to control it in the cab. Not sure how you can stand those wheels, well thought out tho.
@RockyRohde Жыл бұрын
Thanks! I have a limited on order.. The platinum is temporary.. I agree on the wheels
@Eighty8Fitter2 ай бұрын
I gotta know what you do for a living haha!
@Nate-N4 ай бұрын
I am going to install the 1.5 lift on my 2024 f250 per your advice. Do you think i should get the adjustable track bar and/or different caster shims? Really looking to maintain ride and drive quality. Even if small improvement with either id like to do whatever is best for 1.5 lift. I have installed the passenger side non dummy hub as well per your video on that. Thanks!
@RockyRohde4 ай бұрын
I would throw a set of caster shims in it.. It will improve drive..
@Nate-N4 ай бұрын
@@RockyRohde any guess on what degree or brand you would go with? Im not real versed in caster shims on 24s and have been told there is some differences in previous years.
@RockyRohde4 ай бұрын
@Nate-N just get ready lift ones..
@Nate-N4 ай бұрын
@@RockyRohde Cant thank you enough! Appreciate you.
@Nate-N4 ай бұрын
Did you install the shims on your 1.5 lift? Im ordering them now. Thanks again
@DJGonzoNYC5 ай бұрын
Very nice truck… no bed liner?
@RockyRohde5 ай бұрын
I picked this truck up when my KR order got cancelled. Someone backed out of the order. I placed a limited order and drove this one till limited showed up.. Sold it for what I paid…
@allendavidson31176 ай бұрын
Did you do anything else other than the lift blocks. Does it effect anything else. I have a 23 F350 and haul a 5th wheel. I like to go just 1 1/2 up. Any info would be appreciated. Thanks love your content
@RockyRohde6 ай бұрын
Just 1.5” readylift on front…
@ffmcross9 ай бұрын
@RockyRohde, you wouldn't happen to still have the old 2023 F250 Black Platinum rear blocks do you? I have a 2024 F250 Tremor that I want to reverse level. Per a Ford tech, the rear blocks on the non Tremor F250 models will lower the rear and give you about .75 to 1 inch of rake which is exactly what I am looking for. Eventually I may do a full Carli suspension, but initially I would like the truck more level. Im doing this because from what I am being told, is that companies dont recommend or make a spacer/puck for the front of the new Tremors. This is due to the increased ride height already from factory and the angle of the track bar. What's your take?
@twil1996 Жыл бұрын
I know you’re going with the ReadyAir Logiq for your F350. Which is better, Airlift or ReadyAir Logiq? Pros/Cons on both?
@RockyRohde Жыл бұрын
Readyair logic by far.. prevents axle wrap with dual bag setup. It also has heavy duty brackets that bolt to fifth wheel prep holes on the frame. The other kit uses the bump stop on the suspension block.. If your towing a boat or utv trailer the airlift is easy install and you don’t have to mess with sensors. If you’re towing 3-4K pin weight air logic it’s a no brainer…
@twil1996 Жыл бұрын
@@RockyRohde Thanks man! I got a 23 F350 single wheel too and I’ll definitely be in that 3k range at some point times. Thanks man!!
@RockyRohde Жыл бұрын
@terrencewilson7744 I’ll try to do a video on my limited soon.. I have the complete air logic system on it. Pump, tank, and bags..
@bigbroadking Жыл бұрын
Timbrens vs Airbags which you prefer
@RockyRohde Жыл бұрын
Airbags
@MarcRobin-p1x Жыл бұрын
What size wheel adapters your running? Do you have cut factory studs to fit wheels?
@RockyRohde Жыл бұрын
3/8” bora hub centric.. slip over
@richardkusse8273 ай бұрын
Source?
@RockyRohde3 ай бұрын
Google Motorsport tech..
@-BOSSp850 Жыл бұрын
What is that sensor for, that you talked about and pointed to on front driver side torsion bar? I have a F350 xlt on order with 7.3 and plan on putting a leveling kit on it.
@fergotti Жыл бұрын
Bed scales
@agc7076 Жыл бұрын
Got a 24 lariet 250 leveled on stock rims with 34 did not see the 1-in bora spacers online for my year can you lead me right direction
@RockyRohde Жыл бұрын
Google Motorsport tech spacers
@agc7076 Жыл бұрын
@@RockyRohde appreciate it it goes up to 23 models but I'm sure it's the same as 24 LOL fingers crossed
@hevid79 Жыл бұрын
Do you need the adjustable linkage on the 1.5 lift ??
@hevid79 Жыл бұрын
Well just checked my truck, I have a tremor so I have no linkage there. Did you have to use an adjustable track bar for the 1.5 ??
@RockyRohde Жыл бұрын
@hevid79 I did not on 1.5”
@midsouthpressurewash3753 Жыл бұрын
So would you recommend the 3/8 or 1" spacers to run those 37x13.5?
@midsouthpressurewash3753 Жыл бұрын
Ah just listened to the end of the video. Thanks
@crf450210 ай бұрын
My 2020 has a 3" receiver. What do the 2023 and 2024s come with?
@RockyRohde10 ай бұрын
350Srw and f250 are 2.5”
@crf450210 ай бұрын
@@RockyRohde that's what I thought I had heard. That's a bummer they changed them again. I guess my three inch will go to the new owner.
@ShelbyvsViper10 ай бұрын
Dude, as much as your truck looks cool. Everybody reading this: DONT RUN SPACERS ON A F350 HAULING WEIGHT. You are running the incorrect offset wheel, or too wide a wheel of you have to use spacers. Maybe if you only plan on keeping a truck as long as Rohde. But NOT good for the long haul.
@RockyRohde10 ай бұрын
Ran them more than 10 years towing.. buy quality, install correctly, and retorque and inspect every 3k.. Bora only.. Also run a mic on the hub and the spacer when you get them.. If you’re going to install and never do maintenance absolutely don’t run them…
@chaney_WalkedU9 ай бұрын
Wierd, I pull my quarter million dollar race car operation accross the country behind a dually lifted with 24” alcoas and 37s using spacers for thousands and thousands of 90+ mph miles pulling my enclosed tripple axle trailer and had zero issues. Where would I be with out the OEM karens telling me what is and isnt correct.