2023 GMC AT4 with 4” Zone lift on 20x10s/35” trails

[@Adjust-Fire-jy3dy]

$1999.00 That's a heck of deal! You guys do great work.

[@joec9366]

Man you guys are putting out some killer builds! Keep up the great work!

[@NothingButLifts]

Thanks, we have lots more coming soon

[@shanmaradiya6887]

Saw this build and it helped me so much in deciding my lift set up on my 2024 at4. I went with the 4 inch bds lift kit with 2.5 fox performance elite coil over! Lovely set up! Great work!

[@LukeLeopold-f4z]

How is the ride with the BDS compared to stock?

[@shanmaradiya6887]

@@LukeLeopold-f4z I love it! It drives smooth! I drive a lot too. 5k miles a month average and bds gives me the same smooth drive as the stock at4 drove. I highly recommend bds lift with the fox suspension if you’re looking for a great stance and aggressive look! It’s a bit more on the pricier side but it’s worth it!

[@LukeLeopold-f4z]

@@shanmaradiya6887do you have the 3.0 or v8?

[@shanmaradiya6887]

@@LukeLeopold-f4z 6.2 v8! If you curious on the gas mileage by any chance, I average 12 lol and that’s all highway driving too lol

[@LukeLeopold-f4z]

@@shanmaradiya6887thank you!

[@josiahsalazarfox]

Great work

[@imthesameboyiusetobe]

Gorgeous truck! Dang if only yall were a bit closer to me here in GA! I kinda prefer a lip wheel but dang those rebels look nice!

[@NothingButLifts]

We actually do a lot of trucks from Georgia

[@maureenbmcclurg]

What about on an AT4X? We have a different front clip so will we still need to trim mouldings? Have you guys done one yet?

[@1986GaryJr]

Does the Zone lift maintain the factory front track width? Or do you need rear wheel spacers?

[@johnspurrier0001]

Now all you need to do is replace thos plastic bumpers with FAB FOURS GS GMC SIERRA 1500 MATRIX series front bumper, chassis unlimited octane series rear bumber, N-FAB ROCK RAILS and armor tech wrap to keep the scratches at bay.

[@mtxkidd2]

What lower strut spacer did you use to get that extra 1 inch of lift..??

[@canamxmr4760]

Still running that special by chance?

[@WtmGamingVids]

How does it ride with this setup?

[@anthonydente5285]

Let me ask Do you guys recalibrate all the cameras and all of the lighting?

[@StainGuys]

Where is this shop? No info, location, website, contact……

[@Touchedbyapriest]

Yeah would love to know

[@VEHICLELOVER93]

Literally not that hard to Google "nothing but lifts" jasper Alabama. Geeze guy you're on the internet use it properly

[@Blood8Chapel]

Looks amazing. Still deciding a 4inch or 6 inch lift on mine though....

[@NothingButLifts]

Give us a call and we can discuss pros and cons to get you in the best kit that suits your needs/wants.

[@ChaseGamingGarage]

How do I schedule an appointment to get this done ?

[@johnsperle8178]

Are you guys still running this deal?

[@nickweaver9849]

How far from GA are y’all? Would love this done to my AT4

[@NothingButLifts]

We are in jasper, Alabama

[@York.86]

How much does the lower strut spacer affect the CV angles? I have a 6” zone going on a Denali and have a 1.5” lower strut spacer to reduce the amount of trimming. Any feedback?

[@NothingButLifts]

Does your lower strut spacer actually measure 1.5”? If so that’s approaching 3” of additional lift, which would leave you with horrible angles. Or is it 1.5” lift(which should measure around .75”)

[@York.86]

@@NothingButLifts it is a 1.5” lift (.75 actual height), spacer.

[@NothingButLifts]

@@York.86 personally I’d cap it at 0.5” spacer to net 1” additional lift and only if the front is sitting lower than it should .

[@brycesmith8503]

Where are you guys located ?

[@thisvideo2011]

Where are you located?how for something like that?

[@MichaelCastillo-t6c]

Where are you guys located at so I can take my truck to

[@RyanPowell-h6t]

Still running the special you mentioned in this video? Would be for a 22 Silverado 1500 rst 4wd. Thank you

[@NothingButLifts]

We are

[@frankgonzales8588]

Where are you located?

[@Anthony-pi6pf]

so if i were to do a 6" lift would i still have to do trimming and removal of mud flap?

[@NothingButLifts]

Not with a 6” on an at4, but a standard Sierra non at4 yes.

[@joellim0707]

What offset of those wheels? Is that 20x10?

[@Jrevo420]

Where are you located?

[@nagazinafireworks7594]

Where are you guys located? Would love to have you guys do my truck

[@NothingButLifts]

Jasper Alabama

[@nagazinafireworks7594]

@@NothingButLifts Damn that's tobad im in eastern Pennsylvania

[@brooklynboris523]

What’s the offset of the wheels?

[@Jacolby_freeman]

how do I get in touch with you guys I have the same truck 2019

[@hamzahrafati5968]

May i know how would that upgrade cost ?

[@wadamprice]

What offset are the wheels/tires? And are the tires 265 or 275?

[@Antonio20605]

Se ve genial

[@Tonytiger7491]

Can I ask what the off-set on this build is?

[@NothingButLifts]

-18 offset

[@rickeyjones5515]

Where did you get the mud flap delete kit from?

[@johnspurrier0001]

Google 'Gatorback Mud Flap Finishing Caps FC003K' and you'll find half a dozen sites that sell them. I bought all three from Radco. But, if you're trying to fit anything larger than 33.5" on the stock suspension, or 34.5" on a 2" lift you're going to have to cut it all out or deal with rubbing.

[@mymyvero25]

Can i ask where you purchased the mud flap delete?

[@israelserrano6501]

Where you buy the little fender things brother

[@NothingButLifts]

Sharp truck for gmc, McGaughys for Chevrolet, Kelderman for 2500hd gmc

[@Touchedbyapriest]

Did you have to day anything other than a lift kit?

[@NothingButLifts]

Just what we discussed in the video

[@Touchedbyapriest]

@@NothingButLifts what if went with a 6 inch lift. Considering getting a GMC soon. Cant justify the 100k version of the trucks

[@NothingButLifts]

@@Touchedbyapriest The 6" kit is for the non AT4 packages, but yes that will give you the same look.

[@Touchedbyapriest]

Do you have email or your shop details up to ask general stuff instead of her eif ok

[@NothingButLifts]

@@Touchedbyapriest [e-mail]

[@JesusMartinez-wm4dk]

The truck is very high, it would be better in 4 inches lifted