2023 Kawasaki Ninja 400 vs CFMoto 450 SR /SS ┃ New King of 400cc Sportbike?

Kawasaki Ninja 400 vs CFMoto 450SR Full Spec comparison.
- Euro Spec.
- CFMoto 450SS= U.S Market
0:00 Ninja 400 vs CFMoto 450SR
0:20 Key Specs
1:24 Price
2:29 Engine
4:27 Features
6:01 Dimensions
6:58 Chassis, Suspension, Brakes
8:19 Sound
Source :
Kawasaki.eu
Cfmoto.eu /.au. / .com
Akrapovic.com
MCN.com
exhaustnotes.com.au
infomoto.com
#ninja400 #cfmoto450sr #sportbike

[@Sejueee]

I'm all for 450SR, just because of its 270 crank

[@biggums3368]

It sounds so good

[@salskars6637]

It's as close to a "screamer inline 4" as a two-stroke could get. So we have a slightly better sound with all the urban real world rideability. Does the 270 degree engine translate to a slower or faster top-end compared to a 180 degree on the same cc bike?? (I'm guessing not slower, since the 270 is used on an R1 and the Aprilia).

[@lgadow7369]

@@salskars6637 360° crank inline is way closer sounding to an inline 4 than 270°. 270° sounds more like a L twin

[@salskars6637]

@@lgadow7369 -That's what I figured. Thanks. My question is, does the degree difference translate to power difference, or just sound. Does the firing order translate to top or bottom or overall power difference?

[@SportbikerNZ]

​@@salskars6637firstly it it isn't a 2 stroke. You mean parallel twin. Notably a 270 crank has more primary imbalance over a 180.

[@SecondGearYT]

Kawasaki is a long-established brand, and the Ninja 400 engine is reliable, proven, and tested; there is no doubt about that. CFmoto, aren't new players either. They have been around for decades, are known for their ATVs and UTVs, and have a joint venture with Pierer Mobility (which owns KTM). So CF Moto actually manufactures engines for several KTM models, as well as using KTM engines in some of their bikes. In some regions, KTM also supports the dealer network, takes over distribution, and provides parts for CF motos. About the 450SR's reliability, they claim they’ve tested the motor to over 4000 hours of high-revving punishment on the engine dyno and are confident in its reliability. But it's a completely new model with a brand new engine, so in terms of how long it'll last, only time will tell. So if your priorities are reliability, resale value, aftersales service, and looking for learner bikes as a stepping stone before you move up to bigger displacement bikes, the Ninja 400 is your best bet. But if you have the same budget but are looking for more modern bikes (in terms of styling, equipment, and features), don't care about resale value, and are willing to take a risk by buying from a less established brand, you might want to try the 450SR. And for CFMoto riders, please share your experience and your thoughts about your bikes in a comment below. Do you recommend them?

[@SusanooDaisuke]

I own a CFMoto, they are very reliable, my bike's engine has NEVER game any problem. I got a few punishment for a component but it was my fault since it was my first bike ever, so I was totally new on taking care of it. Besides that, it has been an awesome bike, reliable, with a hell good looking style, and they steel people's stare. Tires are awesome, design is awesome, it's just taking care of the bike. Other owners that are friends of mine, have the same opinion. Over all the other Chinese market, CFMoto is DEFENITELY worth the try. I tried and the outcome was amazing.

[@nikolajovanovic8875]

300 sr have very bad clutch on 15000km and have aluminium parts inside of clutch that is broken and parts is expesive and hard to find only clutch is 500euros without work and new one was 3500 not its 4500 prices was lower now its your best bet to buy japanse bike Led lights it they die you need to replace head light complete And part inside of bike are cheap cf moto looks good but inside they are cheap and not good quality

[@joseclaudio1670]

China has more experience manufacturing engines for other companies, they know how and this is why they combined the best manufacturing methods, materials and parts for their own motorcycle...CF Moto all the way!

[@hexadecimal1517]

​@@nikolajovanovic8875 mate, the clutch basket is alluminum to almost every bike being sold lol, not just CFmoto. You probably dont shift the bike properly. I dont think a Japanese bike is going to solve that. Learn to shift smoothly. Also Ninja 400 clutch basket bolts are known to snap if you torque it a little too much. Just because it's Japanese doesn't mean it's indestructible to improper use. As for CFmoto parts, you can buy them for significantly cheaper online in Ali Express. Dealers just like to charge higher because they know the demand is high.

[@skaddisscelik7834]

@@SusanooDaisuke what’s your bike color

[@tristanreymendoza2402]

Parallel twins sound like lawnmowers. The 450sr wins with its engine alone. That 270 crank just sounds so brutal.

[@salskars6637]

Not with a Leo Vince slip-on imho. Although the 270 crank does sound better.

[@Frosty-rd6en]

​@salskars6637 yes they still do. I have a buddy I ride with all the time and we both joke about how his Leo 400 sounds like a angry weed eater

[@Ellisian]

i saw one of the 450's rolling down the road the other day, it was SO LOUD! and that 270 crank sounded great, it's really so handsome 😍 i'm still a little touchy about reliability for CFmoto, but there's so many here I really can't pretend they're no longer viable.

[@salskars6637]

I also read that they've been sold in Asia long enough (before the US) that they have proven their reliability. We just need more parts-availability and hope our f-ed up government doesn't sanction CFMOTO because it's Chinese.

[@aleksarasljic7462]

Cfmoto are amazing bikes , they are very reliable , i own 2 of them

[@radon4163]

​​@@aleksarasljic7462How long have you owned them and is it a pain to get aftermarket stuff for your bikes?

[@englishsteel-nz6im]

I know a top rider that utterly abuses a Ninja 400 in the twisties-- 57k hard miles leading fast rides and track etc redlining it all the time lol and the thing just keeps performing well. There's no way CFMoto even if it's decent reliability is going to hit Kawasaki's stone cold reliability. Also more parts/customization for the Kawi. I also can appreciate a Chinese biz making quality bikes and wish for their individual success, but being that I absolutely hate the evil CCP I can't support lol. I hold this same for all products tho and buy "cheaper" everyday products that are made in Vietnam, India or Taiwan over China whenever possible.

[@user-lz5wt4ii6k]

then you must be careful,beacuse most goods around you they all made in china.@@englishsteel-nz6im

[@BlackArroToons]

Nice comparison, thanks! A lot of work that went into creating these details with the graphics and design. Kawasaki will have to upgrade the Ninja 400 to the Ninja 456 now. ;) I remember my Ninja 250Rs were a lot of fun before trading them in, and could handle most basic freeway situations fine, so ultimately, that is what counts the most for the rider. Handling, comfort, reliability on the Ninjas are great IMO. I'm a big Kawasaki fan, but it's good to see more variety for riders.

[@OakOnboard]

I have 2,200 miles on my CF in two months. My turn signals are not self cancelling - only thing I’d say wasn’t accurate in this video. May be a US vs UK spec. Small detail about ergonomics - the seat has a divot towards the front so you’re actually more upright than tucked in, but there is an acute hip angle as states. I get about 60 MPG. The sensors on the bike are great, if I do so much as take the cover off the bike I get an alert. The app is fantastic, you don’t have to do anything for it to track your ride unlike other rider apps. I live in Colorado so I’ve taken it through twisties, mountain passes, highway runs, etc - whatever you’d like to do the bike is more than compliant. Awesome bike

[@salskars6637]

Congrats on the bike. What's the longest you've ridden in one ride and how did you feel? Were your nuts still pushed forward without knee-gripping the tank?

[@450Ryno]

Does yours have a charging port? I haven’t come across mine yet lol

[@OakOnboard]

@@450Ryno you have to buy the adapter for it, I was so confused about that too. The wiring is in that box on the left side of the dash. Honestly since I can control my music from the dash w nav I usually have my phone in my pocket or backpack.

[@edabrego9217]

Well, al least in Mexico Cf moto sells the sr-s version that comes with single arm and more features that sr version. And yes, it have self cancelling turn signals

[@AhmadKhan-il7ev]

Tapi dekat malaysia, ramai dah start confident beli moto ni sebab 450SR ni masuk malaysia, ramai excited dengan bunyi dia tapi tu lah sparepart susah sikit nak dapat... Dealer pon baru nak berkembang

[@najwanhazim9120]

Betul tu, tpi market malaysia kecik tu yang susah nk lwn motor jepun yg dh bertahun menapak kt sini 😵‍💫

[@jarrolightfeather4703]

mcm saya dah bisa pakai moto China, majority barang2 diorang saya order dekat Shopee make sure beli awal sebelum rosak Kalau rosak time tak ready, its ok sebab kita manusia bila2 je boleh rosak mana yg boleh sediakan payung sebelum hujan je kita buat 😎👍

[@AhmadKhan-il7ev]

@@jarrolightfeather4703 kiranya kat Indonesia ada jual spare parts china di Shopee?

[@ahmadalbab5448]

Tunggu srs single arm dgn ekzos lebih padu

[@el_ith5331]

sparepart dkt taobao banyak

[@mahyuddinrazali854]

They made their own engine based on ktm outline, glad to hear the sound, it so phenomenal for mid size bike

[@RiderXp]

I recently test rode the CFMoto back to back with Ninja and Yamaha and made a comparison video which is getting a lot of interest. I am happy to report that in my opinion came out on top! Who would've thought!

[@malitiemmanuel1321]

Link please!

[@LeeMooEez]

You didn’t include the LED light starting sequences….with that alone will win majority of people hearts 😍😍😍😍😍

[@der_baumstamm]

1000ps made an extensive track test also including the ktm rc390 and Honda CBR500R (A2). the 450sr did in fact beat the rc and cbr but the ninja 400 still came out on top. Eventho on paper the suspension and brake setup on the 450sr is better, the ninja still performed a bit better due to a way better abs system and overall stability. All bikes were EU models as 1000ps is from germany/austria

[@brunociardi9768]

Both are great bikes but the one and only king of 400cc sports bike is the ZX4rr

[@CarlRei]

zx4rr doesn't belong to the 400cc category it almost belongs to the 600cc lineup due to its power and pricepoint.

[@brunociardi9768]

@@CarlRei for the 600 you have the zx6r the zx4rr is basically in a category of its own if we consider everything, the first of its kind really

[@kobayashi-rindou-1997]

Made in China still makes people uneasy, but honestly, the 450SR is really cool.

[@rt2255]

Yeah but cost same as ninja 400 and we know reliabilty and quality of ninja 400 the china bike looks good but will it hold up ling term and in my area nearest dealer is 160 miles away 4 major japanese all i. 10 miles and i know i can get parts, china bike what kind of wait time even if ordered online. 169 miles if warranty work is to be done. Maybe in 5 yrs if they get better dealership network and do not blow up or fall apart after 20k miles.

[@aleksarasljic7462]

Everything is made in china today , even these japanesse bikes

[@ErelasInglor]

@@aleksarasljic7462 That is incredibly false information, Ninja 400s are not made or assembled in China. In fact, most of the Kawasaki engines are being made in the U.S.A. and many of the bikes are produced in India, Thailand, and Japan.

[@geckygeck8999]

@@ErelasInglor 400s are from Taiwan if I'm correct

[@ErelasInglor]

@@geckygeck8999 They are made in Thailand for the most part, some in India, a few in Japan, and some in the U.S. None are made in Taiwan at this time.

[@bonsatago9220]

Reliability is still the best option

[@Nene_760]

Yeah... the 450ss has a lot of cool features an stuff but I need prove of it being reliable. I was deciding this or the ninja but I'll stick to the ninja...

[@papercut1987]

i think giving 450 a few years for aftermarket parts, it will definately be a popular choice on the track. for street here in Canada (quebec), 449cc put it in the same category as the 500and upper bikes, which requires higher registration and insurance annually, logically not a smart option anymore.

[@Bon-mz5kb]

damn that 270 crank sounds sick! i didnt expect that, all in for the cfmoto

[@TA-xq8qz]

Japanese bike is No.1☝️

[@Icantstop502]

No por mucho tiempo

[@javierreyes4748]

Si lo es pero en las altas cilindradas

[@alcatraz1683]

dog

[@salskars6637]

Excellent video/breakdown. The best I've seen so far. Well done! I have and love my Ninja 400 but would own a 450SS CFMOTO. That said, I won't be selling my Ninja anytime soon. After 5 bikes (800 to a naked Liter) the Ninja 400 is my favorite so far. I hope CFMOTO succeeds and sales grow in the US.

[@afafaad9206]

do you know what did happen Second Gear? You earned a subscriber, PERFECT schemes and visual effects. Please do this even more

[@lixandrumarius8452]

Best description video ever! Thanks!

[@clintonyutan1866]

They just released a new version of 450sr, the CFmoto 450srs it now has a single-sided swing arm with underbelly exhaust.

[@147Zero369]

Excellent video!!! Just WOW super detailed!

[@iHaveTheDocuments]

A guy accidentally broke the back fender of his Ninja with his pant leg and Kawasaki repaired it for free quickly. Pro consumer gonna pro consumer.

[@weprayforcars7]

I was going to buy the new Ninja 500, these new Chinese manufacturers are taking over, first BYD and now CF Moto, i am sold on the 450sr, bravo CF Moto 🔥

[@CHANGONATION]

Amazing video comparisons, exactly what I needed to know 💯

[@YrnCoco]

Nice comparison🔥💯 how do you guys make videos like this?

[@JeffreyRyanAranjuez-wt8rk]

Most detailed specs comparison ever. Subscribed!👍

[@aleksandar8090]

450sr all day long. It's mine on spring 💯!!!

[@zahnyto709]

meh, i would still go for the 400 i like the design better/ still prefer the "old" velocimeter/ dont wont to be loud and i couldnt be loud in my country anyway, in general the ninja 400 has the kawazaki agressive sport bike asignature, the sitting position is way better and overall the color schemes available for the 450 are not my taste, therefore ninja 400 ftw!

[@chrisgermann6658]

Tough one.....i would probably opt for the Ninja on the parts avaliability alone. But the 450 has a better fork/break setup along with a peaky crank.

[@user-ez9rw5lm5w]

Great video visualization.

[@va_bg]

Awesome video, thank you 🙏🏻

[@glenndeason]

Love this breakdown. Thanks ❤

[@luiscarloscortescaicedo5084]

Brutal, tremenda moto la CF 450 SR.

[@bryanharrison3889]

I think my biggest issue with people talking about this bike is when they mention the winglets and how they don't believe they help a small bike. They don't understand winglets or aerodynamics. Winglets on a bike will start contribuitng downforce a the same speed whether its a liter bike or a 250, the engine has nothing to do with it. So yes. They are functional on the bike, and yes, they benefit any bike, although the average rider wouldn't notice a whole lot of difference. You'd see a bigger difference on a track day because your lap times would show the benefits of the extra downforce when it comes to handling, consistent cornering, etc.

[@AzuBetta]

lol that misundestanding might be just a you thing, mostly everybody know winglet is about the speed. But, eventhough winglets do have affect on the bike with speed, you do need to realize aerodynamics is HARD. Especially on a bike whyere even the rider contribute to the overal affect of how air move. In motoGP, they spent so much money to cheese out the effect, and it's not simple as you think vroom vroom high speed = down force. The airflow change when the bike is leaning, in corner, the rider move around, turbulance... do you really think, for this price, that this bike winglets really have you gain true meaningful down force !? the facts is yes this bike is nice, but the winglet is surely a cosmetic parts, not the real factor like motogp. It's not simple as oh just put wing 2 sides= better traction, it's a headache and money sink to deal with how airflowing, providing down force, but then have to get rid of unwanted turbulence... What you are saying is true on paper, but that's it, it is imposible to produce bike that for thousands of people with different body and clothes and posture to even worth putting millions of dollars into research and then sell it for a price of 5 grands =)). It is what it is, a cosmetic that maybe have tiny tiny bit of down force, but mostly it will just create unwanted turbulance that has more chances to slow you down than anything. It's ok to have that to looks cool, but that is very naive to think it is anywhere near the level of important and true wing.

[@ric9174]

Hello, at the 4:50 mark, you said the 450SS had an Optional adjustable seat, where can I find out more about this? Im not finding anything about it

[@victorcabecinha]

best comparision video i even found

[@naveedahamed9103]

Please make a video for CF Moto 450SR Vs Aprilia RS457. 🙏🏻

[@markosz22]

If a major brand had all these features and components in a 400cc category bike would cost almost 10k :D I wouldn't mind getting this to get into sport bikes and maybe learn track riding, but unfortunately no dealership around here. :/

[@fazm1bico]

CFMoto 450SS in Canada is 5 years warranty (01:55)

[@Carlisho]

Interesting how the CFMoto is less restricted on the US while Kawi bikes are the opposite, usually even more restricted.

[@alexreyes3000]

There is one error the USB port is not included in the CFmoto 450 Sr is an extra accesorie that cost between 40 to 50 dollars the moto just have a plastic cap and the cable ready to be removed and plug the USB port when buy it. About the warranty at least in Czech Republic and Slovakia CFMoto offers 5 years warranty I don't know if it's the same for the rest of the European Union but at least in this 2 countries are offering 5 years wich is quiet impressive. (5 years or 60,000km)

[@Carlisho]

Thats actually still decent, Kawi asks 100+ dollars for their USB accesory and you still have to do a little bit of hardware mounting.

[@jay_dave8722]

Kawasaki vs CFmoto in short (Japanese vs Chinese bikes)

[@simoneted2]

chromoly steel is the best Like chromoly frame of bmx

[@Zeekybike]

I Love this channel already❤

[@bonespear1212]

mine does not come with self canceling turn signals 450ss

[@khandesrivatsav8754]

reverse shift style help for people who often use bajaj bikes😁😁

[@srtallday3655]

My local motorcycle dealer sells cfmoto and kawasaki its gonna be real hard decided between these 2 when I get my first bike

[@denesealayon8182]

I'll always choose a Japanese Bike even though this 450SR is a little bit more powerful

[@englishsteel-nz6im]

Aside from a classic Ducati like a 998 just for cool factor(and acknowledging ill be wrenching), any serious riding I do is on Japanese bikes because there's literally nothing that can compete in the long term durability and ease of maintenance and I don't think that'll ever change. Can't tell you how many people I know with Aprilia's that have to have constant maintenance work on them-- electronics, leaks you name it -- I don't doubt these CF are "decent" but I'd seriously doubt that they do better than the European brands which all have much more extensive maintenance and shorter mileage lifespans than Japanese.

[@adyghe3]

Is the australian spec the same as the European spec or American Spec?

[@rahulmascarenhas1370]

bro, when aprillia sr440 releases please compare it with the cfmoto 450srs

[@tacticalepsilon2094]

I think I’m afew years once the 450 has become established and people realize it’s a solid bike, and take away the Chinese stereotype for this bike, and parts become available, it will dominate over the ninja 400.

[@donderstorm1845]

it looks so good too

[@smoke05s]

I get way better mileage in my Ninja than that 25 km/l is only 58 MPG. I get closer to 70 MPG. I wonder is the suspension on the CF good enough for serious sport riding / track days out of the box like the Ninja?

[@nesto9889]

I just love the green on the ninja

[@johncampos4869]

I though the 450sr here in SEA (Philippines to be exact) is the same as 450ss in the west? CFmoto should have used the same specs for those.

[@jarrolightfeather4703]

because of Euro4 regulations, u cannot ride a 2stroke motorcycle anymore in European countries meanwhile u can smoke 2stroke like fogging machine in Philippines

[@naveedahamed9103]

So informative.

[@SERDO07]

For Ninja 400 Austin Racing❤ For 450 SR Scproject ❤

[@belivefc]

BTW Ninja 400 can make 65-70 HP with A little mod Tho.

[@deeznutx]

I think you're talking about the zx4rr?

[@izen_]

U means zx4rr? Not ninja4

[@belivefc]

@@izen_ Ninja400 not zx4rr, In thailand we mod ninja400 to 70 HP tho

[@belivefc]

@@deeznutx Ninja400 not zx4rr, In thailand we mod ninja400 to 70 HP tho

[@deeznutx]

@@belivefc damn that must be a monster considering its light weight

[@deus2645]

Japanese bikes need to level up their game Chinese bikes are becoming popular and a no brainer choice

[@mc.bielle6291]

In France we haven’t the Kawasaki anymore 🥲

[@salskars6637]

Wow. RIP

[@user-gn1xx9lt6m]

can i ride this with a 5'4 height?

[@jaynus08]

Yamaha is playing catch up again and at the bottom of this category. I just hope they replace the R3 with something like an R5 just to beat CFMoto but the challenge will be is the pricing.

[@satwakibhattacharya2075]

450SR rocks ❤❤

[@vincebaildham7530]

450 SR ... Inverted forks!!!! YES!

[@anasomar7885]

do the qj srk400 RR against the ktm 390

[@Donjuanseb]

hi men, jaja i say u, this is a good comparation, tanks for read my email ! jajaja

[@PVo-1111]

I just got the ninja 400 because my insurance on the 450 was like twice as much

[@Justfun-gg8xi]

Battle of the Twin cylinder engine 400cc

[@jeffomspaugh6691]

I'm still going Kawasaki. The Chinese don't have a good track record.

[@whimsabo]

450 just killed the ninja 400 and r3

[@mbag012]

What next? 500cc? 550cc? 600cc? 650cc? Why cant these manufacturers make the bikes too a racing class?

[@nikolajovanovic8875]

l hope that cf moto can handle 5000km per year

[@ismoaironen4152]

Wrong facts. The 450sr weight is a full tank 179 kg and empty tank weight 168 kg. ninja 400 weight is a empty tank 168 kg and full tank same like a 450sr 179 kg. Sou weight is same both bike.

[@odellbracamonte9662]

If a had a chance i still choose kawasaki n400. Still can match the 450sr on topend. Japan brand has different power output compare to china brand.realtalk. Imagine sr has 50cc more displacement but ninja400 can still match

[@samholsink6843]

you're just naive to think you're bang for bucks is better with the ninja 400

[@robertdelacruz7920]

450sr cost 4090 usd price.

[@Geoje-R]

Just buy R7 and it will satisfy you.

[@salskars6637]

Not if you want long ride comfort.

[@Nene_760]

​@@salskars6637is the ninja good with long ride comfort ?

[@salskars6637]

@@Nene_760 - Absolutely - all day. I purchased a seat from China that has a bit more padding yet still minimal (no granny seat or expensive Corbin). Got it within weeks after purchasing the N400, so I never road long distances with the stock which is thin. This seat has just enough padding to slightly minimize forward slide/nut crunch (which is not bad to start with). I have a Honda Interceptor 800 Sport Tourer and the N400 is more comfortable ergonomically -and lighter by 158lbs. In case anyone is interested, the seat is: C.C. RIDER Ninja 400 Z400 Front And Rear Seat Fit For Kawasaki Ninja400 Black White, 2018-2023 Product Code: RX05-06-BW (approximately $300.00 USD)

[@NudaMan]

You guys seen how Ktm tested there 790 engines for days but still look what happened… unreliable lmao

[@moxie5021]

the 450sr is $8,000

[@drewoke5046]

No it’s not in America

[@user-mb4xy2cz3t]

China is still China. cfmoto manual states oil needs to be changed every 3000km, while ninja oil changes in manual are 4 times more - 12000km, there goes your cfmoto reliability.

[@tsj491]

I think the 450SR have 50HP not 47HP

[@yoshian2092]

damn

[@1204joey]

vtwin sound urgh...miss my aprilia

[@jefffortachon6674]

Kawasaki is king

[@samedbal3418]

Who hurt china bro 🙏😭

[@loftyintentions1985]

Come on man. Gp shift isn't a feature and you can do it to pretty much any bike in about 5 minutes. This isn't a reason to buy or not buy.

[@ktkace]

China unrestircted ECU is only 1000 RMB 2nd hand folks.

[@rt2255]

Zx4rr four cylinder king even in usa flash 72 to 75 rwhp

[@deeznutx]

A knowledgeable rider would know that the zx4rr isn't in the same category as those two. No one in their right mind compares a N650 to a zx6r.

[@rt2255]

@@deeznutx lol look around seen a bunch.of zx4rr to ninja 400 comparisons. Not sure they are saying equal just comparing the new unknown 400 to a bike most can relate to as they know what ninja 400 is. Just using ninja 400 as a reference point. Honestly comparing a bike should be size and cylinder direct, 400 twin to 400 twin 400 four to 400 four. But see 700 twins like r7 compared to 400 twin, guess it is just contrasting the 2, though in my book silly. Like comparing 1300 hyabusa to 1000 bikes, quite meaning less to me

[@deeznutx]

@@rt2255 I agree with this reply of yours. Yammie noob kinda compares the zx4rr to the n400 but realized that they are not in the same category he also thought to compare it to the r7 and realized the same thing. The zx4rr has its own categ and at the time, it's one of a kind.

[@salskars6637]

Kawasaki is king because they had the balls to bring back small displacement inline 4 screamers.

[@Justfun-gg8xi]

Zx4rr is different categories ofcourse inline4 are always faster than twin

[@LordHolley]

The CF450 has a lot of eye candy features, like many CCP products. At the end of the day kawasaki is definitely a known entity, and like you said resale value..... That's huge, and it's important to respect your money. Personally, I will pass on the eye candy, I want proven reliability and to get some of my money back out of it.

[@sugarnads]

Kawasaki is pissing themselves laughing in zx400r

[@animeislife3558]

You cant compare Chinese bike with Japanese one.

[@fqeagles21]

I think CF Moto it’s still behind,I’m not even confidential buying it

[@adr2567]

With the new RS457 coming out, I think we’ll have a new winner

[@jarrolightfeather4703]

nah cfmoto cheaper meanwhile Aprillia is insanely expensive

[@adr2567]

@@jarrolightfeather4703 The price hasn’t even come out, it’s expected to be much cheaper than N400. Also, wouldn’t pick a Chinese made bike over an Indian one anyday

[@jarrolightfeather4703]

@@adr2567 hahahaha how come much cheaper when it's Aprillia brand 🤣 I've seen alot of Indian bike and most of them weak for me all below 50hp even the fastest sportbike from Bajaj only 200cc D400 only 170kmh top speed meanwhile Cfmoto 450sr 200kmh

[@adr2567]

@@jarrolightfeather4703 Because it’ll be made in India, so cheaper for the Indian market. The Indian bikes may not have best top speed granted but the quality is head and shoulders above anything Chinese. Also, Chinese brands keep coming, flipping and leaving a terrible legacy of sales and service.

[@WillyQ-lp8dc]

,,Still the KAWASAKI is the best.The CF moto bikes is eye candy but still Made in China.👎🤧

[@glu583]

Are there any idiots out there who trust catalogs and buy bikes?

[@AnKg636]

new king is Kawasaki Ninja ZX-4RR

[@Nene_760]

Does it only come in green?

[@AnKg636]

@@Nene_760 I don’t know depending on zx10rr yes, i saw images on goggle of zx4r black and blue hope there will be other colors for rr too.

[@HieiKirisame]

if you can afford it. you're basically paying an extra $5000-$6000 USD for an exhaust note.

[@nikolajovanovic8875]

Problems us parts for cf moto l was have big problems On 300cc sr with parts and it s too expesive and not good quality

[@marianandnorbert]

my god please just voice your videos this speech synthesis is absolutely unwatchable

[@ktkace]

Ninja 400 has a shitbox for a tank , its super unergonomic . Also soft as hell suspension that dives on the slightest touch of the front brake. Both the 450 dosnt have.

[@salskars6637]

This calls for a change in fork oil for a bigger rider. Simple fix for non-adjustable forks.

[@keithjones2512]

The review says tank sizes are the same.... Shit box on the CF too?.

[@markballena9178]

Original big bikes is different to authentic big bikes