2023 KTM 390 Adventure Skidplate and NiceCnc foot pegs

[@Hutchie2112]

I fitted the SWmotech flat pegs, which can be adjusted up down forward and back. The flatter pegs make a huge difference. I also fitted a nicecnc rear brake pedal, which folds up if you drop the bike. I fitted mine underneath rather than on top, as I prefer a low pedal when standing. I've put the ktm bashplate through some hard times, and it copes a treat, with some loud ding noises letting you know its doing it's job.

[@thebelligerentmechanic8916]

those motech pegs sound great , i may have to try some if these don't work out " it would be nice to lower them a little. Glad to hear the KTM plate is holding up well . I may have to get that brake pedal 🤗 safe riding friend :)

[@Hutchie2112]

@@thebelligerentmechanic8916 I got mine off of amazon, it's a well made bit of kit. Also, another quality bit I put on mine is the venhill featherlight clutch cable. Can order in varying lengths/colours (colors) , and it makes for 1 finger clutch work. Brilliant (I always thought a cable was just a cable, but this is super cool) Riding safe is what got us to the ages we are ;) Enjoy every mile .

[@pars5027]

Thanks for video. Is that KTM parts house in Lexington, Ky.? I bought one of these motorcycles in Feb. I've removed grab handles and installed Moose racing tailrack, 15mm thick plastic, so far I like it. Barkbusters handgurds. I bought both of those from Revzilla. And I attached a larger kickstand pad, bought that from Amazon.

[@pars5027]

And, 1st service they did talk me into quickshifter. I like that, happy i got it.

[@thebelligerentmechanic8916]

I'm not sure? I think they were located in California. I still have the stock handguards but they are flimsy so i see some bark busters in my future , i may do that kickstand pad , i did have to stop in soft clay and it sunk pretty quick. Ride safe friend

[@pars5027]

@@thebelligerentmechanic8916 Thank you, be safe!!! I got the VPS Barkbusters. They come with extra plastic to add to handguard for more wind protection. The aluminum bars come with good mounting hardware.

[@thebelligerentmechanic8916]

@@pars5027 gotta love quick shifting :)

[@pars5027]

@@thebelligerentmechanic8916 I found it, KTM Twins Escondido, CA

[@glennmcguire5571]

My boots have aggressive bottoms as well, so I removed the pegs out of the pedal on the left/shift side. Made a difference. NiceCNC.

[@thebelligerentmechanic8916]

I didn’t remove mine, I’m gonna try to get used to lifting my foot

[@RYwoodview]

I removed just the front row of pegs. That makes it easy to tilt my foot forward to use either pedal, but preserves the grip of most of the pegs.

[@RYwoodview]

I'd like to see how to adjust the height of the shift and rear brake pedals.

[@thebelligerentmechanic8916]

I'll make a quick video about how to do that for you, probably next weekend " gotta work all week :)

[@RYwoodview]

@@thebelligerentmechanic8916 That's very nice of you! I did since find these demonstrated on other KZbin videos, so do it if it makes sense for your own series' completeness. Thanks.

[@thebelligerentmechanic8916]

@@RYwoodview glad you found info to adjust your levers . Ride safe friend

[@thebelligerentmechanic8916]

FYI just posted a video for you about adjusting your brake and shift levers, sorry it took so long I've been working constantly .😓

[@RYwoodview]

@@thebelligerentmechanic8916 Well, thank you TBG!

[@Ntmoffi]

I tried those pegs and used them without changing the levers and it was not awesome. I'll have to adjust mine when I've got time. I went back to the stock ones in the meantime.

[@thebelligerentmechanic8916]

I know what you mean, they will take some getting used to. sounds like those SW Motech pegs might be the trick, adjustable front to rear and up and down . I have adjusted my levers ,its ok but i do have to take my right foot off the peg to shift down. constant compromises .

[@Motographyza]

I am also going to go with the OEM skidplate. Much cheaper than the fancier ones as well.

[@AlexandruGaal]

there is also the GIVI , SW Motech skid plate options (atleast in Europe) They look a bit sturdier than the OEM powerparts and slightly cheaper.

[@Motographyza]

@@AlexandruGaal Correct, might have a closer look at them. As much as i like the black dog ones, importing it to where I am is just not worth it at all.

[@leeinwis]

damn those are wide , better than the ones I got , on my crf.

[@thebelligerentmechanic8916]

@@leeinwis they are great for standing on long off-road sections 🤗

[@LordTyphuryus]

TREX Racing engine guards and skid plate is where it’s at

[@Ntmoffi]

I like theirs too but I'm still leaning more towards the SW-Motech one.

[@thebelligerentmechanic8916]

The factory KTM plate help up well in some pretty ugly offroad , however it didnt take any hard hits thanks to my expert riding skills. :) :) :)