2024 Denali HD with 4” Cognito vs 2022 AT4HD with 5” BDS

[@jamesvolpe2186]

Hands down go with the Cognito Lift kit. Those ELKA shocks blow Fox out of the water. And Cognito has bigger Lift kits.

[@shogun4200]

Awesome builds as always!

[@LANCETHEMASTER]

I love the growth of this channel

[@NothingButLifts]

let us know what you would like to see more of.

[@thomashovis365]

The majority of your Cognito 4” lifts with 37’s are all GMC’s. Do you not get many Chevrolets in for that setup?

[@tylerwilliams9664]

These are awesome! 👏

[@williammarlar6628]

That Denali is sexy as hell and clean line the stock wheels on it , keeps it classy. The AT4HD the white pops but dislike the wheels sticking out so far but great video. So cognito it is. 👍✔️

[@JkBull]

Love the black unlimited. Could you please get a measurement of how high the top of the cab is once this lift and tire set up is done? Parking garage problems 🥴🥴🥴

[@anthonypope2279]

Awesome trucks

[@TheMrjackson40]

I guess the BDS kit has changed on HD. I ran six inch on my truck and could run factory no spacer

[@jre444455555]

What size tire are you running on the Denali and was there any trimming required?

[@williamg.vazquez4609]

Are you guys walk in or do i have to make an appointment ? I wanna put a 3/4 inch lift on my AT4

[@worldwidescalestv]

If I want to run 40s with 24x12 or 24x10 wheels assuming the tires are fury tires. What size lift should I get can I get away with the 4” cognitio or should I jump up to the mcgaugy’s 7-9 kit. Would love to have you install it all and document 😊

[@ryanrobertson6157]

How is the ride with the 4” cognito? Is it better than the factory ride? Also… no one can seem to answer this question… but does the 4” suspension void factory warranty? Looks incredible!! Great job.

[@roroag1]

Which one runs better

[@Jassman3536]

Been following for a few months and like your work. I have a 20 F250 7.3 with a Carli 3" level and am thinking of getting a Denali 3500. Of the 2 which has the smoother ride. I'm hesitant cause my truck rides like my 2 1/2 tons 09 F150 and 03 GMC 1500...Im not familiar with suspension lifts for HD. Im going with the gas again so the 6.6 gas. Thanks

[@NothingButLifts]

The gm will always ride and drive better due to independent suspension

[@michaeldagostino69]

Would love to see more 99-06 trucks and suvs if you get any in

[@NothingButLifts]

We’ve done a lot of videos on 99-06 gm trucks. Check out some of our past videos.

[@NothingButLifts]

We will keep posting them as they come in

[@Jerzeyguy]

I see lots of rock chips from those tires sticking out.

[@mharper3]

If you ran 10 wide 0 offset on both lifts. How Much more would the cognito stick out. I like stance of the negative offset but have concerns running -19 on the cognito. 4” is the right height in my opinion

[@NothingButLifts]

Id recommend BDS If you’re wanting 37s with -19 offset.

[@unmappedtails]

I just got the 24 Denali Ultimate and want the similar lift and tire size. Are you regarding these to 4.56? That's my only concern before doing this.

[@NothingButLifts]

No, the diesel trucks have enough torque to easily carry the 37s.

[@alanadame2166]

And what’s the ride quality between the rough country 5 in and the bds 5 in ?

[@NothingButLifts]

Both ride good, the bds with fox shocks will be better though

[@wyatt5770]

Does the AT4 package come with a level or lift from factory?

[@NothingButLifts]

Not on the 2500 platform

[@kirtkudlacek9247]

Do you happen to have the overall height of each truck? Thanks

[@NothingButLifts]

I don’t, but the bds kit is close to 2” heigher

[@jayb7675]

Isn’t the 4 inch Cognito close to 7-8k but the BDS is around $5k installed? About a $2k price difference?

[@Belknap307]

Yes, but the cognitio is better in nearly every aspect.

[@popzgonzalez9615]

Hi I just purchased 2024 gmc at4. I’m looking into getting a lift kit, Any recommendations on what brand you recommend as I no nothing about this stuff anything would help greatly.

[@versace133]

doesn't look like anyone has responded. I have the same truck and decided to go with the 6.5" BDS PE kit. I will let you know how it rides once it's here and installed. I chose BDS because I had a 2021 Ram 1500 with the 6" BDS PE coiler kit and it rode amazing. I hope the one for this truck does too.

[@popzgonzalez9615]

Yes that does help a bunch thank you so much

[@Nusel78]

@NothingButLifts I have the exact truck as this black ultimate and going to have you guys do the same 4” cognito kit however I can’t make my mind up whether to go with the Fox 2.0 or Elka 2.5. Which one would you go with if you had to chose between these two?

[@checkmatearmament2281]

I am looking to do the Cognito 4" on a 2024 3500HD, would it look OK with 35's instead of 37's?...🤔

[@Kendogg82]

@@checkmatearmament2281 get 37's...looks funny with 35's.

[@NothingButLifts]

If it’s in your budget go Elka. They are 2.5” and adjustable. The fox 2.0 with and without resi are still a great shock though.

[@NothingButLifts]

@@checkmatearmament2281 yes with the correct offset, but if your running stock wheels I’d do 37s

[@Nusel78]

@@NothingButLifts Thank you! I also went with the wheels you recommended.. I think it turned out pretty good.. drive.google.com/file/d/1poBviDCproqlngz-1VBUKgpZhodMEF_p/view?usp=sharing drive.google.com/file/d/1yAuzIdbksa9bdiS10kQb7cIpvsv8s5x1/view?usp=sharing

[@alanadame2166]

How’s the ride quality on echa kit ?

[@NothingButLifts]

Elka kits ride great

[@richardoliver1621]

What type of leveling kit would you recommend on the 2024?

[@CristianM4252]

Wicked MFG Leveling kit . It’s the only way anyone should be leveling their GM HDs . You won’t sacrifice your ride quality with it. Wish I would’ve known about this kit before I bought a cognito kit . My ride quality has been sucky for years because the torsion bars are cranked . But if I were to get a new GM , the wicked kit is what I would get .

[@bradpowell843]

Very good to know. Do you know how their bigger lifts compare to Cognito?

[@SlowRollCrawlin]

On the cognito site it says you can clear 38s on stock wheels with the 4” lift is that accurate ?

[@NothingButLifts]

Yes, With more trimming and the correct offset .

[@gregmassay9660]

Did the 2024 require any trimming?

[@NothingButLifts]

Very minor

[@jayspik6498]

COGNITO 💯%✔️

[@Jack_The_Ripper_Here]

Give it to me man send it over to Bucharest

[@BC_Hunter]

Do lifts void warranty?

[@jayb7675]

Not if you have the dealer install them.

[@joefontana2270]

Where are you so we can do business with you?

[@NothingButLifts]

Jasper, Alabama

[@MikesGarageReviews]

Where are you located?

[@NothingButLifts]

Jasper, Alabama

[@MikesGarageReviews]

@@NothingButLifts I have the same black ultimate and would like the 4” lift. I live a little over 3.5 hrs away. How long would it take to install and how many weeks are you out. I would be willing to bring my truck down

[@MikesGarageReviews]

@@NothingButLifts heller

[@donearl6675]