2024 Harley Heated Hand Grip Options

[@BillySkipper]

I have always always had the cooling fan switch turned on thinking it was the radiator fan. THATS WHY I GET THE TRIANGLE Great work man. Your videos are great.

[@ITFZone]

Yes indeed! Turning this off should clear that - let us know!

[@DPGgliding]

I got mine for my 2024 Road Glide. Was not VIN locked. Dealer ordered it for me and I installed them. Thanks for the video.

[@ITFZone]

Most welcome, easy installation as long as they turn on!

[@VTG63]

Once again, thanks for all your content and time to save us all the time and $$$ on installations, FINAL Verdict on the heated GRIPS from HD customer care and Dallas Harley Dav., after two days on the phone for 45 plus minutes on hold, awaiting a agent, I finally spoke to the most unconcerned male from HD customer care, to tell me it was up to my dealer if they choose to charge me are not and they can read the instruction sheet, goodbye! My local dealer, Dallas HD finally called me back and stated that the PAB1145 bulletin was only for their techs after they complete an install, not for the customer install. So, since I did my own install, I had to pay the dealer $82.50 to complete the setup, however, if the dealer did the install, it would have cost me 21/2 hours labor at 165$ an hour, so I guess I still saved a couple of hundred $$$$, thanks for all you do and it was worth a shot! I'm sure each dealer is different and Dallas HD is about every$$$$$$

[@ITFZone]

Oh my, very disappointing. I get that its a PAB vs a Service Bulletin BUT it is Harley's fault that the early versions of the bikes were not setup to activate the grips and which is why they changed this so it would. I seem to remember that the grip instructions imply they should work and its only this bulletin that calls out the issue. If I get an opportunity to call this out with HDMC I will keep this on my short list for them! Appreciate your follow-up on your experience!

[@craig4465]

Just had mine installed, adversary . they work great.

[@ITFZone]

Excellent, glad you were able to obtain them!

[@craig4465]

@@ITFZone they work nice and the 3 heat settings show up on your dashboard display.

[@ITFZone]

Correct the display indicator is supposed to work. I however am so happy the indicator does not show until they are powered on, before the SkyLine OS update the grip icon was always there which indicated they were on but were not.

[@josegregmartinez5755]

Did you get them in orange or gloss black ?

[@craig4465]

@@josegregmartinez5755 Orange, it accents the orange on the tank.

[@dmcharley64]

So when is Harley Davidson going to offer you a position in Customer Service? Keep the good info coming!

[@ITFZone]

Hey I keep hoping for a call! Would love to help them out!

[@DuffyOne-m5b]

I too thought there was no hole/slot in my handle bars, were the pin you showed goes into, then cut off, but then I turned the control unit more forward and there it was. It's to prevent turning the whole thing too far and crimping or cutting wires. They also did this "pin" on the handle bar mounting assembly. Again to prevent wire damage if you try to adjust the handlebars to far forward or backward. .

[@ITFZone]

Interesting, I can confirm no hole in my bars but I also didn't have the pin on the clip either. Good point about wires, making any adjustment or change in this area will require checking them! I think its unfortunate that Harley is not considering a slot for a hole to allow for adjustment, it is such an ergo benefit.

[@DuffyOne-m5b]

I should have added, this is a 2024 Road Glide that has the slot and pin, not my 2023.5 CVO@@ITFZone

[@ITFZone]

Got it!

[@josegregmartinez5755]

Great video & information thanks! Wondering how we can make our controls light up like the cvo ?

[@ITFZone]

Yep not seen this part come out yet. I assume if you try to purchase the controls using a CVO part number your dealer may not be able to order without a CVO VIN. But I have heard it really depends on who you are working with at the parts counter.

[@bradleyrsx]

Just want to thank you for your content! Keep it up! Also if you ever get a chance…. I own a 2024 street glide. I rode from Toronto to NYC this week and one of the things I noticed that annoyed me that I can’t seem to solve is, while using Apple car play the prompts from gps are pre set low in volume and despite turning it up while the voice is activated, it returns to the pre-set volume. Any help would be appreciated. Thank you

[@ITFZone]

In the menu go to Sound - Volume Settings, You can turn up the prompts here. I think this will solve the issue but if not let me know.

[@BillySkipper]

Just noticed today that after 8 months and 8,000 miles the rubber on the grips is extremely worn. Wonder if they will replace them under warranty

[@ITFZone]

I kinda suspect that would be a wearable part and probably not but maybe. I have not noticed this yet but you have way more miles than I. I remember some flame grips and Harley offering just the rubber insert but not an option with this design.

[@JasonRBenjamin]

Do you happen to have the service bulletin for the homelink garage module not activating when you select it in the menu after installation of the module?

[@ITFZone]

Yes it is: 941003892024 HomeLink® module activation requires Digital Technician II (DT II). Contact a Harley-Davidson dealership.

[@utahnick]

Very helpful video 👍

[@ITFZone]

Awesome! Appreciate the support!

[@VTG63]

Thank you for your video's, great information, my dealer wants to charge me 2 1/2 hours labor totaling $462 to install the heated grips on my 2024 Road Glide when they arrive next month, I ask the service Mgr, isn't the grips just a plug and play, he insist he has to run a whole bunch of wires to install. Based on your video, I'm going to cancel my installation and just purchase the heated grips. Thks for your support.

[@ITFZone]

Yes indeed that is an uninformed service manager OR dishonest. This is a simple install HOWEVER you may need to have them turned on with the digital technician but since its a service bulletin I would push for that to be free IF you need it. It is HDMC's fault if they don't come on as they are supposed to.

[@VTG63]

@@ITFZone Thanks for the video, grips arrived today 5/17, easy install, however, after plugging the main fuse back in and attempting to start the bike, it would blow the 7.5 fuse in the fuse panel, so I re-watched your video too find that my grips will need to be programmed, so first thing tomorrow 5/18, I will make a trip to the dealer and be ready with your PAB1145 code, I can assure you, they're going to put up a FIGHT!

[@ITFZone]

@@VTG63 Force be with you! Use the HDMC customer care line if needed.

[@VTG63]

@@ITFZone Yep!!!!! Dallas Harley Davidson charged me $82.50 half hour labor , even me given her the PAB code prior to fixing, stated since it's after 4pm, they will have to call support on Tuesday and try and get me a gift card refund, I will be on the phone Tuesday to HDMC as well, service people. They had the PAB code 4 days prior to my arriving, you thk they would have call before I arrived today 5/24/24.

[@ITFZone]

@@VTG63 Uh! Education, communication between HDMC and their dealers is such an issue and they are BOTH losing with riders!

[@briannorwell202]

I bought a "regular" Road Glide and got the entire Adversary collection, heated grips included, not a problem

[@ITFZone]

Yep if you want the collection you are set!

[@scotta6610]

I have a 24 RG and am I to understand that installing heated grips literally is opening the hand controls and plugging them in?? (minus the possible BCM update?) --

[@ITFZone]

Correct! You can look at the QR code number to determine if the update is needed or just try them.@@scotta6610

[@scotta6610]

@@ITFZone will do , just ordered mine. Love your channel. Do a great job explaining and showing. Thanks for taking the time to do what you do -- not many good videos for the 24's out there yet doing different modifications. How about showing a fairing removal and where the homelink module is -- for us non cvc peeps. :)

[@ITFZone]

Ah I have that video, only I didn't know where it was but its the module right behind the headlight (may need an updated version of the video): kzbin.info/www/bejne/qHOmfHh_qLSrrtU @@scotta6610

[@hdryderct]

Right grip has been back ordered for quite some time. I've had the left one for over a month.

[@ITFZone]

Oh my!! Good to know! Hope is out there then.

[@hdryderct]

@@ITFZone yes is is hopefully lol. By the time I get the right one I won’t need it. Illuminated controls for the non-CVO models should be able to be ordered in April sometime as well per the person I spoke with at Harley.

[@ITFZone]

LOL! Good to know on the illuminated controls, they are very handy with all of these additional buttons!

[@eDogg123]

Could you do a video on touring seat options for 2023/2024 CVO’s…

[@ITFZone]

What information would you be looking for? Several seat options now for the new bikes from Harley and others now. Really a preference thing.

[@eDogg123]

@@ITFZone Maybe I am missing something. I am not finding many “Touring” seats for the CVO’s. To my knowledge, the old seats wont work on the new bikes. I was looking for a Hammock seat (best Harley touring seat) and they dont make it….neither Saddleman or Mustang make anything for the new bikes either. I think Corbin is the only big player to make a touring seat for the new bikes.

[@ITFZone]

Look for anything that fits a '24 Road Glide or Street Glide. Any of these will fit the '23 CVO. www.harley-davidson.com/us/en/shop/c/motorcycle-seats-and-backrests/2024-touring-road-glide-fltrx?format=json;i=1;locale=en_US;q1=parts;q2=motorcycle-seats-and-backrests;sp_cs=UTF-8;x1=primaryCategoryCode;x2=superCategoryCodes;fitmentFilter=2024-FLTRX@@eDogg123

[@ITFZone]

I have seen photos of Saddlemen but I suspect you have to email them for these still: [e-mail]@@eDogg123

[@lancmac]

Wow.. 78d today... Tomorrow a ride to Yosemite Park....

[@ITFZone]

Oh man! I have been watching some riding videos just dreaming of getting out. We now will have snow Sunday - Tuesday next week. But today almost 70 and the roads are not horrible so possibly a short ride this afternoon!

[@ryanr4181]

I wish I could put them on my 21 street glide

[@ITFZone]

Yep it is a much easier process now but I do miss the more simple controls on the previous model!

[@JohnNewton-ev8ch]

Please evaluate these in the rain. I live in the PNW and need heated grips with some rubber on them for comfort.

[@ITFZone]

These are on my 2023 CVO as standard. Not heard of any rain complaints from other owners and I have not had any concerns with or without gloves. I do wish sometimes that they would get hotter. It seems to me the older version was a bit more powerful as far as heat goes.

[@JohnNewton-ev8ch]

​@@ITFZoneThank you.

[@jimtownsend6139]

Another great video. I have a set of Adversary heated grips with the orange highlights on my 24 Road Glide. I had the dealer install them before I took delivery so I can’t say what was done. The Road/Street Glides with chrome trim like mine have orange highlights on the tank badges. (Ones with black trim don’t). The orange on my tank badges kind of complement the orange on the grips. I like the look. My only complaint is that they’re stupid expensive. They’re around $150 more than all the regular heated grips with the twist dial on the end that they use on non-Skyline bikes.

[@ITFZone]

Ah I would agree the orange is a good look with that tank badge. I also agree the cost is crazy. We anticipate aftermarket versions coming for these and more options from HDMC so I suspect the price will come down for this option.

[@customgaragemoto7590]

Top video 👍👍👍👍👍👍👍👍

[@ITFZone]

Thank you 👍

[@lancmac]

Damn.. I have the cooling fan turned onm..... Well If I would habe had a better understanding... Thanx again

[@ITFZone]

I know this one is confusing! I believe many yellow triangles are because of this setting!

[@ColoradoNative100]

So just installed my heated grips and sure enough, they don't work. Will be heading to Mile High Harley Parker with this bulletin #

[@ITFZone]

Tell Greg I sent you! Hopefully they waive any fees to turn it on since they work!

[@denis9272]

🙏

[@ElvisOnAShark]

It seems like Harley’s policy is to make it as easy to buy a bike as possible but as hard as possible to buy accessories.

[@ITFZone]

They have made some efforts with their web site but yes it can be and often has been confusing. If you have a good Parts Rep at your dealer treat them well. They have A LOT of information to keep up with.

[@joehaney1705]

Hello again from Indy!

[@ITFZone]

Almost Indy 500 time! I am ready!

[@joehaney1705]

@@ITFZone I do have a couple of questions. I had apple car play working for awhile. Then tried to set up the WiFi and I got it going but I lost car play and won’t reconnect. I deleted all devices and connected them again and no luck. Also don’t have Homelink either. Icon is there but not highlighted so it won’t open. I haven’t done last update yet but shouldn’t affect that. I’m on the 23-1/2 RG. CVO.

[@ITFZone]

Ok so CarPlay creates a WIFI connection. So you cannot have both the bike connected to your hotspot AND CarPlay at the same time. Nor would you need this as the assumption is you are using your phone for maps / weather / traffic. The HomeLink has been a challenge for several. I have found in more than one case the module is actually missing in the bike!! When the icon is dim and won't come on some report pulling the main fuse for a good 10 min or so has corrected this, I suspect resetting the BCM. But if the icon has never been there for you I would really want to look under that fairing and verify the module is even there.

[@geraldgoodiii6993]

No more running wires thru the bars ? Man Those 2024s just keep looking better and better The 124 on the 2023 makes mad heat .. cant wait til 100* temps here 🤦 Got that oil cooler fan but ever since I had bike tuned on PV they can’t get it to work *post 2021 PV software doesn’t support the Harley OC fan. Have to copy some lines of code from the Harley tune and move it into PV tune. Yea they can plug me into the Harley computer but then bike is flagged What a mess. Bike rips and is super fun but I tend to go one step too far with my shit.

[@ITFZone]

Love it! Mad scientist at work. The EPA rules are making it harder for sure. The '24's have resolved many of the annoyances but have added more. We all may end up owning a Twin Cam era as a "classic" for performance fun at some point.

[@tommcgovern8153]

The whole "VIN locked" parts scam is a load of crap. I have a 2005 police electra glide with no "Electra Glide" badging on the front fender. The 2021 and 2023 revival models had the badging that attached w/ 3M tape. Alot better than drilling holes for the old mounting system. They would not sell me the 3M badging because it was "VIN locked". What a joke. So I bought the old pinned version on Ebay and ground the pins off, then attached and trimmed my own 3M tape. Pain in the butt, but impossible to see the difference.

[@ITFZone]

2 sides to this, CVO owners most like appreciate some unique parts being locked but for many parts they add no value to the model so why bother locking them, could sell more parts!