2024 Update - VCX Nano Install with Techline Connect

[@garyshannon7702]

Awesome video, thank you. I installed Techline on a laptop that had the VCX Nano software suite already installed and got errors during Techline installation and then errors in Techline after selecting the VCX when attempting to communicate to the vehicle. I had another clean laptop so followed your steps and it worked perfectly first time. My advice for others getting errors with previous installations of the VCX Nano software is to uninstall everything and start from scratch using the steps shown in this tube.

[@erinmaloney8991]

Thank you so much. I've been fighting to get techline connect to talk to anything for months. This is the first video that has gotten me any progress.

[@zavierjr876]

Did you actually see progress or you just got your hopes up. Test it before you comment next time.

[@erinmaloney8991]

​@@zavierjr876didn't know you were the KZbin official comment approver. It did work for me. Piss off.

[@zavierjr876]

@@erinmaloney8991 now u know

[@Kieran-q4t]

Great Video and good content. It was also very well presented. I have been using the VCX Nano since Windows XP, and back then you needed to use the Virtual Machine. It has been native to the 64 bit environment for quite some time. Mine has been worth its weight in gold. Usually people who are having problems with it are usually missing a file which the anti virus software has removed without their knowledge. Again great video

[@amandalovesmetimes1]

Thanks! I followed all your instructions and my seat moves correctly for the first time since I bought the truck last fall!

[@albertorios4608]

Many many thanks for you guidance!🙏🙏🙏

[@bsegment]

I just purchased this vcx nano because of your original video and couldn't get it to work. Found these 2 videos and thought you had the fix and realized you didn't. Did some more digging, and realized that if you change the date on your PC to before the licence expired (I changed mine to 1/1/24) the software works. Now weather or not you can flash a bcm from the website like this I'm not sure.

[@LowbuckLS]

@@bsegment ok good to know, thanks for sharing that tip. Are you using the GDS2 part of the software?

[@bsegment]

@@LowbuckLS I just used tech2win so far, literally just got it this evening, needed to diag what I believe to be a bad bcm. Don't really know what I'm doing yet lol

[@bsegment]

@@LowbuckLS I've only used tech2 so far. Still trying to figure this stuff out, literally just got this today. Not sure what gds2 does

[@NajeeLIvey]

Wow! Very informative lol 😂 I can’t sleep currently

[@ForwardEngineering]

Hey man super thanks for the new video! Still waiting for my vcx nano but I was curious if I'm swapping the body control module is there a specific process I need to follow or can I basically take the old one out and put the new one in then program it or do I have to do something beforehand?

[@LowbuckLS]

@@ForwardEngineering you should be able to just install the new module and program it through the SPS2 system I showed in the video.

[@tmcelroy43]

Hey I just watched and followed your video step by step. But when im using the techline connect it doesnt let me go into setting of programing my BCM it just goes straight to program and my car restarts but nothing changes. The only difference that i noticed in your video is the vcx nano firmware is 1.9.5.0 and mines 1.9.4.0 and its saying that is the most up to date. Have you ever encountered this problem? Have any tips or tricks for me? I can send you a video of me attempting to perform the program.

[@InnovativeDirectorAndreWilliam]

What do I need if I am just trying to program my BCM for a 2006 Cadillac DTS

[@NajeeLIvey]

I can do it for you , if you haven’t gotten to it by now

[@shawnstthomas4811]

Randy I followed your programming to the T so far but Cannot seem to program my BCM on my Hummer H3 as it keeps throwing E4491 E4423 when it begins to program the BCM interview tries three times and then faults out.

[@zavierjr876]

Did they take out theft deterrent ? I can’t find it on my sps2

If you want to use virtual machine for VX, don't use VirtualBox, use VMWare. I do run VX Nano without issues in VMWare. Hope this'll help someone.

[@LowbuckLS]

Good to know, thanks!!

[@NajeeLIvey]

What is virtual machine ? I love knowledge 🧠

[@NajeeLIvey]

Awesome sauce !! We all are catching hell with customer service as if we didn’t program a module this year alone.. Trump was re-elected yesterday 🇺🇸

[@trainingdragon1964]

Looks like there are some newer versions of the VCX Diag. I'm mostly a GM guy but might use it on other brands. Which of their devices do you suggest currently? And with which configuration, i.e. with Wifi or without etc.. I have a laptop I will use with it unless there's a newer or better way to go. Thanks

[@LowbuckLS]

@@trainingdragon1964 I haven’t used any of the newer models, but I’m always leary of using wifi when flashing modules, I prefer to stick to a hard wired connection.

[@nathanielbolden5053]

i have 2010 Buick LaCrosse CXL and i need to do a crankshaft position relearn but i didnt see the option on sps do i need gds2?

[@NajeeLIvey]

You can use a bi directional scanner like an autel your preference, special functions tab*

[@phillip-cl8bk]

Im doing a auto to manual trans swap on my silverado, is there i way i can do it without doing anything to the PCM? If i do got to change anything in the PCM or a module would a GMtech2 diag tool work? im struggling with finding anything out researching the internet

[@ericknunez8218]

I did everything like you explain I’m trying to add a new key fob but it show up communication error do you have any idea of what could be wrong thanks for the video

[@zavierjr876]

That’s because you started the app with the dongle already installed to the car. Set everything up and connect the dongle as the last step. Had the same issue.

[@TehNouk]

Can i just use the pay the license for SPS and tech2win to program a bcm? What do i do with techline?

[@iliyakrustev1241]

Hello very nice video! I live in Bulgaria, Europe and i tried to flash my tcm on my GMC Sierra 2014. I purchased a subscription SPS for 2 hours and was 18 euros. When i download the software it downloaded me TLCSuite 2, which i think is not the installation file and when i tried to launch techline connect from the browser it gives me error UEH101: null. I waste my money. Please help me and thanks in advance!

[@maciejchojnacki9112]

Same with me, have fix it and if you do - cxan you tell me how?

[@ericknunez8218]

I had the same error I just delete all the Bosch files and reinstall everything again and it worked to me

[@trainingdragon1964]

Just got my VCX Nano. I'm following your procedure however I've got the device connected to my laptop but it seems my laptop and VCX software wont' recognize the device. I get the big RED X across the device on the software. On the device when I first plug it in it beeps and I get the red and blue lights light up, but then the blue light goes out. Tried to hit reconnect but no joy. Any suggestions? Thanks

[@zavierjr876]

Are you using a virtual machine (VMware) if so, you have to let the computer know if you’re connecting to the actual physical PC or the virtual instance. Let me know if this helps if not we’ll figure it out together.

[@capitalr8649]

After installing the techline with the newest Tech2win it doesn’t recognize the VCX nano anymore. Only the version of tech2win that comes with the driver works. Any fix around that?

[@LowbuckLS]

@@capitalr8649 I haven’t been able to get Tech2win from GM to work, so no I don’t have a fix for that yet. Still experimenting, if I find a solution I’ll make a video on it.

[@loungelizard836]

I wonder if GM execs sit around at HQ thinking, "Is there any way we could make our software even HARDER to use?"😁

[@nschelling6420]

I tried using the VCX VX Nano to replace and reprogram the TCM on a 2015 Suburban following a reman trans install. I gave it up as a bad deal. I’m sure a computer savvy person can figure it all out but it is not at all straight forward. I could never get the Nano and TLC to talk. I’m not very handy with computers and would not suggest the Nano to anyone like me.

[@shawnstthomas4811]

Did you ever have any luck I'm trying to reprogram a BCM on 2006 Hummer H3 and as soon as it goes to flash with the vcx Nano it retries 3 times and faults out. I managed to see the truck it just won't write to any module

[@nschelling6420]

@@shawnstthomas4811 I gave up and sent the vehicle to a dealership to get the TCM programmed. I should have done that right from the start.

[@skider6712]

hello, i living in France, and the software was bloqued of the update error in red. I have reinstall the soft and the same mistake. I have tested with 2 pc.

[@LowbuckLS]

@@skider6712 which software is being blocked, the Techline Connect software or the VX Manager software?

[@skider6712]

@@LowbuckLS thanks the techline connect.

[@LowbuckLS]

@@skider6712 I think the problem may be your location. According to this article on the VXDiag website there is a different procedure needed for people in Europe. See this link: blog.vxdiagshop.com/2022/03/16/vxdiag-sps2-not-work-for-european-gm-cars-and-vans/

[@LowbuckLS]

It looks like you can access the European SPS2 program through this website, hopefully you can get it working: public.servicebox-parts.com/

[@skider6712]

@@LowbuckLS Thanks, i am reading the website. I wanted to update my Cadillac CTS 2005 for not having problem with the ecm.

[@DonnaWilliams-n5r]

Gonzalez George Hernandez Gary Lopez Mark

[@tunedautoworks6003]

Super painful process