$20k flight of death Joe Nall 2024

[@Aerosnapper]

Fine flying indeed - but I'd like everyone to know what a great job the cameraman did tracking the flight. Anyone who has tried to track aircraft will know this and how very well this was done.

[@FASTFREDDIE-R.C.]

Thank you 🙏🏻. I do the best I can sometimes it doesn’t come out as good as I like but it really nice be appreciated. 😊

[@kinjari]

Praise the cameraperson!

[@FASTFREDDIE-R.C.]

Thank you much appreciated

[@cliffordclark]

Yes OUTSTANDING.....none of that zooming in to where you can't get an actual feel for the ground speed. To all other cameramen, forget the zoom when filming RC, If you do, remember to zoom out when it's on it's way back!

[@FASTFREDDIE-R.C.]

Sometimes it hard to keep the ground and or tree line in view but it does help you get a feel for the speed. Thanks for watching and checking out my channel

[@jimmccloud3089]

That was the smoothest flying of an RC that I have seen in years. Bummer on engine failure and crash, but I am sure he will be back in no time. Great video

[@jimmyhaley727]

All it takes is money and lots of it

[@yamkaw346]

If it’s your only hobby it’s really not too expensive

[@FASTFREDDIE-R.C.]

@yamkaw346 exactly

[@TestECull]

@@yamkaw346 WBWAHAHHA what?! 'not too expensive' on a video about a $20,000 airplane eating shit? You're joking....I love this hobby but come on bro.

[@yamkaw346]

@@TestECull $20k is a comically high figure for the damage done in this video. Realistically it’s $5k lost. That is the price of an annual inspection on my airplane, or the price of like 3 of my guns. Less than one of my watches. Everything is relative and compared to a lot of hobbies like this it is not very expensive. That doesn’t mean it’s cheap, although it can be if you want it to.

[@coriscotupi]

That inverted turn smoothly blended into a knife-edge was the highlight of the flight. The engine flamed out in the worse moment, but such is the hobby, it comes with the territory. Here's hoping that this fine pilot is back in the air with this or another beautiful jet as soon as possible.

[@FASTFREDDIE-R.C.]

I agree worst possible timing

[@rexdaniels3350]

That was some beautiful flying. I loved the perfect rolling 360. It was a high risk, high reward flight. Stuff happens though. You pick it up and move on. It’s far better than sitting on the couch, and wishing you’d done impressive things in your life. Thanks for the show. Good on ya!!

[@FASTFREDDIE-R.C.]

You are absolutely correct 💯 My heart skipped a beat watching it hit the ground

[@jamesweir2943]

20,000 worth of 'stuff happens'

[@welshpete12]

Good luck to you and hope you have it back flying soon !

[@markdavis7397]

Wow, very skilled pilot.

[@FASTFREDDIE-R.C.]

It seems like every pilot here at joe Nall week is very skilled

[@markdavis7397]

@@FASTFREDDIE-R.C. LOL, yes the videos are very intimidating. I have to make it out there someday.

[@davidrte.664]

I always disliked flying on cloudy days it was so easy to loose perspective on what the plane was doing. This isn’t the problem her the pilot was rallying good.

[@Timberon]

This showed up on my feed and WOW! The pilot makes this look so easy. That's talent.

[@FASTFREDDIE-R.C.]

Takes a lot of practice

[@miketrissel5494]

Was so realistic, I expected the pilot to bail at the end.

[@natal777]

Have never seen a turbine flown better than that anywhere! WOW ! Sorry for the loss

[@FASTFREDDIE-R.C.]

It’s just money 😂

[@AlienRacer-qh3hy]

Yeah so sorry, 🤣😂🤣😂🤣. 👽

[@mitchd949]

The little pilot no doubt threw up on the tiny instrument panel and shorted something out bringing down the aircraft!

[@FASTFREDDIE-R.C.]

Obviously 😂

[@L8nitedave]

@@FASTFREDDIE-R.C. Fox 2, slpash

[@eriklapparent4662]

Superb model and awesome flying beyond the fligh envelope. Flame out due to high rotation rate flat spin. Sorry for the crash. Sincere congrats and cheers from France.

[@FASTFREDDIE-R.C.]

Thank you sir 👍🏻

[@fluchterschoen]

Are flame-outs and compressor stalls the same thing, or closely related to one another? When the aircraft was doing the vertical spins around its own axis I immediately was thinking of the risk of compressor stall and then decided these small-scale engines must be a lot more immune to it than full size turbojets. But then the engine failed at the end and I revised my thinking. Amazing model, amazing piloting - I hope it can be rebuilt and back in the air soon ❤

[@DwightStJohn-t7y]

@@fluchterschoen as a non-RC guy I thought this plane was in the air for a long long time and could it have just run out of fuel????

[@fluchterschoen]

@@DwightStJohn-t7y Yep, definitely a possibility. I was into RC a long while ago but not these days. I'd imagine this plane, given how costly and advanced it is, might have a low fuel sensor - or at the very least the pilot would have a very good handle on the flight time available - and then keep well within the estimated time limit. And in line with what you've said, I got the strong sense that the flight was about to come to an end, just before the crash - so that would support the possibility of it running out of fuel (and the pilot just didn't quite get his timing calculations right). But the engine stopping during that 'flat spin' manoeuvre makes me favour a flame-out or compressor stall - it's quite a tricky thing to keep the fuel-pick-up (that's inside of the tank) always in contact with the fuel when a RC plane is pointing up, pointing down, right side up or upside down. And coupled with the centrifugal forces throwing the fuel all around the tank, I'd reckon a fuel interruption is a strong possibility too. The final thing is that the turbojet engine is sucking in *a lot* of air, and this happens most effectively when the engine is travelling fast, relative to the flow of the jet. The aerodynamics around a turbojet intake are really complex. At the moment of the engine failing the plane was more-or-less stationary in the air, and moreover it was spinning around almost on its own axis. That would disrupt the airflow into the intake - and maybe made the airflow 'dirty' enough to cause compressor stall or flame-out. The 'pop;' and the puff of black smoke is possibly caused by unburnt fuel being exhausted, if the combustion process had ceased (flame-out). I reckon the owner/pilot will shed more light on what happened in response to the questions that viewers are asking. I'm interested to know what actually happened.

[@horsepower711]

According to the person that was doing the camera work it wasn't a flameout or compressor stall but a catastrophic failure of the turbine engine with an internal explosion of the compressor, that's what the pop and black smoke was that was visible just before the crash.

[@mikes4564]

Very cool model with an actual "scale" speed. I hate watching the models that rip across the sky and look like models. This one looks more like a real aircraft in flight.

[@FASTFREDDIE-R.C.]

Scale flying is a skill onto it own

[@malfunctionjunction6212]

It is a real aircraft. A small one.

[@furyofbongos]

Excellent camera work. Not too zoomed in like too many others. This way you really get a feel for the speed of the flight.

[@FASTFREDDIE-R.C.]

Thank you I try to at least keep the tree line in view. Thanks for watching

[@piersyd]

What an accomplished pilot, a real display of mastery. What a shame about an untimely engine failure.

[@FASTFREDDIE-R.C.]

Very costly no doubt

[@wokbok43]

lol,pilot he’s not a fukken pilot ffs lol

[@DwightStJohn-t7y]

how about "any gas left"??

[@bobwoods1302]

Not sure how untimely it was. Looked like he was depending on that engine to get him out of the conditions he was putting the plane in for most of the flight. Great flying but it's asking for trouble as well.

[@deldridg]

@@wokbok43 Clearly he means RC pilot. As both a pilot and an RC pilot I can tell you they are both very challenging and both require piloting skills. This guy is insanely capable.

[@williambeatty5779]

Thank you! Coolest RC plane, flight, and camera work I have Ever seen. Will not forget it.

[@FASTFREDDIE-R.C.]

Thank you and thanks for stopping by and checking out my video I have more in my channel

[@jimhudson2108]

Simply fantastic flying. Smooth, precise and un-hurried. I hope you're back in the air soon. Thanks for sharing

[@FASTFREDDIE-R.C.]

Surly Thanks very watching

[@avipatable]

Immaculate aerobatics. What a shame.

[@FASTFREDDIE-R.C.]

A costly mishap

[@avipatable]

@@FASTFREDDIE-R.C. Yes, I think flame out is quite a risk when doing so many manouevres that interrupt the airflow so much, but having said that, it handled quite a few of them before the bad one...

[@FASTFREDDIE-R.C.]

Yup that’s the chance you take doing these types of maneuvers but the turbine actually came apart and exploded in this case

[@FASTFREDDIE-R.C.]

@@avipatable definitely although in this case the turbine actually exploded and came apart

[@avipatable]

@@FASTFREDDIE-R.C. Oh right! Wow, that is a different issue altogether! Not a lot he could have done about that!

[@walterbenson5275]

THE BEST RC FLYING I’VE EVER SEEN , PLEASE SHOW US MORE !!!

[@FASTFREDDIE-R.C.]

Thanks, Check out my other videos plus I’ll be posting a lot more videos from Joe Nall week later this week 👍🏻

[@jonnie2bad]

If you think this is the best you need to see Jase Dussia fly.

[@FASTFREDDIE-R.C.]

I have a video from his midday show from last years Joe Nall posted and more videos of Jase I’m going to post from this year soon stay tuned and thanks for watching

[@rohanbaty3155]

If u flat spin a turbine aircraft once and u don t flame out, take the win and do some other acrobatic stuff. Too bad about the jet tho. It looked awesome

[@antone5462]

That very firt pullup showed this is a seasoned flyer, neat flying in the box, crisp maneuvers. So sorry about the loss of the plane.

[@FASTFREDDIE-R.C.]

😓 unfortunate

[@js70371]

The stall maneuvers that go into the spin and the upside down flying are extremely impressive. This pilot is highly skilled.

[@FASTFREDDIE-R.C.]

@@js70371 no doubt

[@locodriver601]

Its not surprising the engine quit with those manoeuvres. Great Pilot.

[@FASTFREDDIE-R.C.]

Lot of stress

[@grahamhall2662]

The 1 left roll over full right circle at 1.40 is just magnificent flying skill. Extremely difficult to execute seamlessly but he makes it look easy. Congratulations.

[@FASTFREDDIE-R.C.]

Very skilled pilot

[@blancolirio]

Very professional flying! Did the flat spin stall the intake flow and flame out the engine?

[@FASTFREDDIE-R.C.]

Possibly, the turbine exploded

[@weskal5490]

That has to be some of the finest stick-work ever.

[@BarryRudge]

Excellent photography and I got the feeling the person flying the model got a little to enthusiastic as some of those outside turns the G force load on them was tremendous and any moment I expected the wings to rip off. The last spin with the flame out was such a shame as no one wants to see a model get destroyed. Even if the airframe was scrap hopefully all his components and motor were salvaged

[@FASTFREDDIE-R.C.]

Thank you and thanks for watching

[@samsly8464]

Fantastic flying! I'm very sorry, It has happened to all of us. Hope you get back on the horse quickly!

[@FASTFREDDIE-R.C.]

Just part of the hobby

[@Kaktus965]

@@FASTFREDDIE-R.C. *Maaaaaaan thats a whiteboi hobby,,,, don’t see no homeboi’s over in there*

[@VimyScout]

That was some flying. I could sit and watch a display like that all day.

[@FASTFREDDIE-R.C.]

Joe Nall week happens every week

[@brianreece785]

This pilot is very skillful for sure. Amazingly smooth and precise. My Carf J10 turbine came apart and managed to crash land. It was repairable but not easy job.

[@FASTFREDDIE-R.C.]

Very ballsy as well

[@1FokkerAce]

Fantastic control… amazing display of inverted flybys… great talent on “the stick”.

[@FASTFREDDIE-R.C.]

Lots of practice

[@johnedwards1685]

Very good-looking plane and simply superlative piloting.

[@FASTFREDDIE-R.C.]

Skilled indeed

[@FirstLastOne]

Didn't even have time to eject in that final flat spin. Poor Goose!

[@FASTFREDDIE-R.C.]

😂

[@stansmith-h2b]

Something that large should have cameras in them 😉

[@fredsmith6324]

put a few cameras on that and anyone can experience flying a fighter jet with their feet firmly on the ground. amazing, hope the damage wasn't too bad and was repairable.

[@FASTFREDDIE-R.C.]

Thanks for watching

[@DXT61]

For those worried. The pilot survived.

[@constantinosschinas4503]

The short loop just before the malfunction was so clean and not possible!

[@bryanbaumer250]

thrust vectoring, anything is possible

[@constantinosschinas4503]

@@bryanbaumer250 yeah, i was exaggerating to make the point.

[@danschneider7369]

Dudes skills are insane. The power to weight ratio on that bird must be off the charts.

[@FASTFREDDIE-R.C.]

Jet power baby

[@vaughnslavin9784]

Amazing flying and RC build.

[@sarahalbers5555]

Camera work so good, i was reaching for my barf bag. Some amazing flying, i have never seen anything like it.

[@FASTFREDDIE-R.C.]

Thanks a lot!

[@tonydeaton1967]

My favorite type of flying. Buttery smooth. Sorry for your loss.

[@FASTFREDDIE-R.C.]

👍🏻

[@hunterjones9822]

Splat, Happens to the best of us....

[@FASTFREDDIE-R.C.]

That’s pretty much the hobby at some point things will go south

[@petiecoe5294]

Great flight and sorry to see that engine failure

[@acw400]

Really nice flying. Getting out of that flat spin induced with vector thrust and without engine was simply impossible. Looks like the engine quit after failing due to gyroscopic forces. Can you please share what turbine brand you were flying?

[@FASTFREDDIE-R.C.]

Sorry I was just filming this flight I’m not into turbines I’m all electric on my models. Thanks for watching 🍻

[@baddoggie101]

Some people have too much money.

[@gravityfuzz]

The others non reaction is perfect. "Yep another one"

[@FASTFREDDIE-R.C.]

😂

[@douglasmoir502]

That was a combo of stellar flying skills, great camera work, and really bad freaking luck!

[@FASTFREDDIE-R.C.]

Thanks for watching

[@johnnyllooddte3415]

its always that last 10 seconds

[@FASTFREDDIE-R.C.]

😂

[@MrSpinkser]

Murphy knows when to cut an engine to great effect….😢 what a shame. Great display though!

[@FASTFREDDIE-R.C.]

Damn that Murphy 😂

[@mkosmo]

@@FASTFREDDIE-R.C. Any ideas on what caused the failure?

[@FASTFREDDIE-R.C.]

@@mkosmo The pilot said the turbine let loose so it pretty much exploded

[@mkosmo]

@@FASTFREDDIE-R.C. oh wow, that's insane. I was wondering since the pop didn't sound like a typical compressor stall!

[@FASTFREDDIE-R.C.]

Since there wasn’t the usual fireball that comes after a turbine crash I presume he was very low on fuel. Turbines are known to go out in style

[@eezyclsmooth9035]

This Is so Amazing and cool. It is so sad that it ended the way it did! I have never seen anything quite like this.💫

[@FASTFREDDIE-R.C.]

Pretty amazing

[@JohnDoesItAll]

Impressive flying skills! The clouds look pretty awesome too. Looked like a pretty soft crash.

[@okflyer777]

LOVED watching this guy fly!!! He has such fine style. Just totally fun to watch. Nice flying jet!

[@FASTFREDDIE-R.C.]

Unfortunate ending

[@Mike-01234]

Bummer might been able to save it if he was high up and going fast rarely works out that way. Should figure out a parachute system like a BRS.

[@FASTFREDDIE-R.C.]

Yeah I thought he could’ve leveled it out some

[@rsambrook]

There was a loud pop before failure. Did the compressor stall causing the failure?

[@FASTFREDDIE-R.C.]

Turbine exploded

[@oswynfaux]

The kind of situation you want an emergency parachute option

[@FASTFREDDIE-R.C.]

I’m not sure that option is available in rc

[@btolley59]

@@FASTFREDDIE-R.C. Oh yeah, you can make your own or buy one online. A slim chance beats NO chance.

[@eartag794]

Thanks for sharing Freddie

[@FASTFREDDIE-R.C.]

Thank you and thank you sir for tuning into my channel 👍🏻

[@anorman67]

Best RC Jet demonstration I've ever seen.. Unfortunatly, the engine flame out and crash is bad.. But even that could have been worse, as usually they go up in flames :-(

[@FASTFREDDIE-R.C.]

I think fuel was almost out

[@xMRPx]

..and just like that, a man has his day totally ruined. Been there, done that on many occasions, but not with an aircraft as expensive as that one! Excellent pilot, very, very smooth on the controls. His years of experience is obvious, even to a blind person. One consolation, at least it didn't catch fire upon impact.

[@marktibbetts3799]

I don't think I have ever seen a jet fly that smooooooooth. What a drag. At least it didn't crash at 100mph

[@FASTFREDDIE-R.C.]

Still was a total loss frame broken in 3 places

[@Boogie3D]

@@FASTFREDDIE-R.C. Total frame loss, not total loss. The equipment can probably be reused.

[@FASTFREDDIE-R.C.]

@Boogie3D yes the electronics we’re salvageable

[@Boogie3D]

@@FASTFREDDIE-R.C. So more like 5k instead of 20k ;)

[@FASTFREDDIE-R.C.]

I’m going by what the pilot told me frame lost wings folded turbine exploded basically servos and rx were salvaged

[@patrickr9606]

That dude can FLY!

[@FASTFREDDIE-R.C.]

Skills for sure

[@RARenfield]

Great pilot skills. Great camera work.

[@FASTFREDDIE-R.C.]

Thank you 🙏🏻

[@DennisHughes-h8b]

Just like watching the real thing. So smooth in take off. Wow.

[@FASTFREDDIE-R.C.]

@@DennisHughes-h8b incredible skills.

[@brettbuck7362]

I am always amazed at sport RC guys, every single one of them knows and cares "how much it cost". I have been building models at all levels for 60ish years, I couldn't tell you beyond a random guess how much any of them "cost".

[@FASTFREDDIE-R.C.]

@@brettbuck7362 at least that’s what we tell our wives 😂

[@brettbuck7362]

@@FASTFREDDIE-R.C. I have no one to answer to, I genuinely don't know. I have never "bought an airplane" in the sense RC guys do it, I know that I spent about $400 on a box of 4.5 lb balsa a few years ago, and the last time I got propellors, they were $60 a piece unfinished . As I recall, my current #1 engine was $425, I got it at the 2007 team trials and used it almost exclusively since then, maybe 1500 flights or so. Beyond that, I have absolutely no idea, not interested. That separates the RC sport fliers/duffers"club fliers", they will always, in the first 30 seconds of meeting them, tell you how much their airplane cost, and apparently that is some figure of merit to them. My biggest modeling cost is traveling - a 6000ish mile round trip to Muncie is about 200 gallons of gas, for example, but I have driven about 1500 miles the last two weeks just for two "local" contests.

[@fredschneider5352]

What an incredible slow rolling circle. Great piloting skills with a incredible airframe. I loved flying my 80mm Futura fomie till i stalled it in. My fault.

[@FASTFREDDIE-R.C.]

The futura is an awesome flying jet

[@rogeronslow1498]

That flying was phenomenal!

[@samholdsworth420]

2:20 what the actual F*CK LOL

[@kari53]

That sucks. But thanks for rhe show. Grear flying and great combination manuvers.

[@FASTFREDDIE-R.C.]

Thank you 👍🏻

[@yellowlab5624]

Cool, great job, nice build !

[@FASTFREDDIE-R.C.]

Thanks for watching 👍🏻

[@yellowlab5624]

@@FASTFREDDIE-R.C. 👍👍

[@johnrheiner3234]

Boy...that is when a parachute, like the one's on a full scale Cirrus, would be so handy.

[@FASTFREDDIE-R.C.]

Right 👍🏻

[@weshillsberry6275]

I don't think it would've had time to fully deploy at that altitude anyways

[@richardschindler8822]

That’s sucks!!!! BUT, here’s something to think about. Think of the jet engine as a gyroscope. If you have ever had a gyro and tried to turn it while it was up to speed, you can see it’s not easy. It moves the way it wants to, not the way you want it to. So as much fun as those maneuvers are to do and watch, think of that poor jet engine getting all twisted. Just some mindless input from an old man. BTW, I’m a retired corporate pilot as well as a A n P license since 1976 so I do know just a little about, them thar jet motors. Hope this can be of use to someone. Great video BTW

[@FASTFREDDIE-R.C.]

Thank you for watching and sharing your knowledge. After talking to the pilots crew they informed me that the turbine actually exploded.

[@liamfinch4129]

SUPERB piloting - tradgic end.

[@hwalter5432]

Flew in there a few years back, AWESOME place, smoothest, LONGEST grass runway my old airplane has EVER seen! Absolutely beautiful place! I think Triple Tree is where good pilots go when they die!

[@FASTFREDDIE-R.C.]

Triple tree has a full time staff to keep up with maintenance

[@mikejohn2307]

Best flying I have ever seen.

[@FASTFREDDIE-R.C.]

Really skilled pilot 👍🏻

[@georgedreisch2662]

Fuel starvation as a result of the g-loads for the maneuver at a lower fuel level?

[@FASTFREDDIE-R.C.]

Possibly I’m not very knowledgeable on turbines kinda out of my pay grade 😂

[@tonywright8294]

Experts !

[@jasonmarmor-cdot1750]

Very skilled flying - best I've seen

[@FASTFREDDIE-R.C.]

@@jasonmarmor-cdot1750 incredibly smooth also

[@skyking0475]

This guy was so good. I bet he gets free models to fly. I was all part of the show.

[@voodoo7008]

I’ve only raced RC car, so I’m triple impressed by the guys by the pilots mad skills. Knew it was coming, and hated to see this fine craft damaged. I was expecting to see someone fly their $100 Walmart helo into his flight path, not a 20k jet engine flame out.

[@tonym995]

Amazing flying! Bummer about the crash. I want to get into turbines. Is there no battery backup to power the control surfaces? Why did this happen? I’m still very new to rc planes and have a lot to learn still.

[@FASTFREDDIE-R.C.]

Yes but thing’s go wrong fast in this hobby

[@Andrew-13579]

I’m guessing all that fantastic maneuvering was due to vectored thrust. Once the thrust quit, we saw how little conventional control authority it really had. Sort of like with a jet ski watercraft…can’t steer them without thrust.

[@flycatchful]

Plane and pilot become one. What a masterpiece of skill and precision.

[@FASTFREDDIE-R.C.]

Indeed

[@nephewbob7264]

The pilot was buried with honors at Arlington- in a matchbox.

[@FASTFREDDIE-R.C.]

😂🤣

[@jerrypolverino6025]

Great flying. Dis the flameout occur from fuel starvation in the knife edge?

[@FASTFREDDIE-R.C.]

@@jerrypolverino6025 turbine explosion

[@jerrypolverino6025]

@@FASTFREDDIE-R.C. Oh gosh. Thanks you. It was a beautiful flight. Just amazing.

[@mitchcronin8689]

OMG that was incredibly fine flying! Very sad ending... I'd have liked to look closely at that airplane... did it have thrust vectoring?

[@FASTFREDDIE-R.C.]

I’m 99% sure it does thanks for watching 👍🏻

[@tminusoftexas3224]

Dad always said sometimes when you show off it backfires

[@FASTFREDDIE-R.C.]

😂

[@RichardsModellingAdventures]

This is the most impressive display of piloting skills I have ever seen.

[@FASTFREDDIE-R.C.]

Some really good pilots at this event 👍🏻

[@johndavey72]

Incredible flying and fabulous camera work . But a very abrupt finish ......this deserved a more polished accolade.

[@stealhty1]

Those thrust vectoring are awesome, great level of skill,,, looks like something got loose inside and been swallow by the engine

[@FASTFREDDIE-R.C.]

Yeah not exactly sure the reason but the turbine exploded either just not designed for that abuse or something could have been sucked into it

[@Sgtbowman71]

that was painful to watch! nice flight up till the end though.

[@FASTFREDDIE-R.C.]

The turbine exploded and the frame was broken 3 places basically just grab your electronics and start over.

[@f900ex5]

@@FASTFREDDIE-R.C. Do you know what turbine was in it?

[@FASTFREDDIE-R.C.]

@f900ex5 sorry I didn’t ask

[@billwendell6886]

When Charlie Brown grows up and trades kites for kerosine.

[@FASTFREDDIE-R.C.]

😂

[@SRocco-dv8we]

Guys at very end …” ok Ted , wanna get lunch ? 🥪 “ lmfao

[@FASTFREDDIE-R.C.]

😂 thanks for watching

[@o9rgeronimo979]

Bet his wife is pissed, coulda had a boat!😂

[@suasponte8363]

Does that have a thrust vector?

[@FASTFREDDIE-R.C.]

Yes definitely 💯

[@bobc997615]

Was it engine failure due to the "spin" that caused lack of airflow to the intake?

[@FASTFREDDIE-R.C.]

I’m not into turbines so honestly I can’t say but it was a total loss

[@agejce]

Even sounds like the real thing

[@FASTFREDDIE-R.C.]

Very scale

[@pauljenson8042]

Best pilot I have ever seen.

[@joshchaney6750]

5 dollar parachute Ohh well

[@Carwash301]

I'm guessing there's no room for recovery when you are flying in the vectored thrust mode. No air over the control surfaces.

[@FASTFREDDIE-R.C.]

Pretty much

[@stevendegiorgio3143]

Hopefully that plane is ok.it appears like nothing broke.I soo wanted to attend Joe Nall this year,but couldn't afford to.I only live 35 miles away in Greenville S.C.The weather is soo bad I couldn't even fly my own R/C plane.Bummet

[@FASTFREDDIE-R.C.]

Yeah we’ve had some down time due to weather but everyone still out flying rain or shine

[@paulcadden4967]

Was that a compressor stall at the end? Very nice flight dynamics throughout tho. Impressive

[@FASTFREDDIE-R.C.]

Turbine exploded

[@windward2818]

A bit unfortunate to have a flame out during a flat spin maneuver at low altitude, not many options for recovery.

[@jbw9999]

We've got a flame out, Mav.

[@FASTFREDDIE-R.C.]

Goose talk to me

[@TestECull]

Ain't got no gaaaaas innit

[@FASTFREDDIE-R.C.]

😂🤣😂

[@Andrew-13579]

😂. Good one!

[@walterbenson5275]

GREAT COORDINATION !!!

[@FASTFREDDIE-R.C.]

Pretty awesome thanks 👍🏻