241C disassembly

[@thomasbailey9895]

I wish you would have told us what size wrenches and sockets you were using during the video but other than that it was very helpful thank you

[@rwk3547]

Great video! Have you made a video showing the installing of seals and total reassembly? If not, please do so. Your video is very informative !! Thanks again.

[@TorqueKingTV]

Hi- we will be doing more transfer case videos in the near future.

[@kevinwest3689]

4:18 you didn't get that off without taking off the snap ring, wonder how many people figured it out like I did and how many people busted that trying to do it like you did?

[@kevinc5917]

IS the first sensor you remove the vss?

[@tomazingtv]

THANK YOU. for putting this video out there.👍👍👍

[@michaeltaylor5018]

I have a 1990 K2500 8-lug truck, with an NP241c. I'm trying to find out whether or not the speedometer gear on the 241c is a 40-tooth gear or not. I'm looking to swap my stock TH400 to a 4l80e.

[@fredcolberg1318]

This is a passenger side drop 241c from what? A Surburban?

[@TorqueKingTV]

Yes, this is out of a 1990 V2500 suburban if I remember correctly.

[@zacharymakoff9939]

what size is the front output yok nut

[@shyamp9405]

1 1/8 for mine

[@slickmick0820]

..THANKS. currently resealing my 241 C.

[@VegaDG]

Good video Thanks.

[@williamwaters5029]

Can you swap the shift cam into a 243 transfer case

[@jamesdavies7526]

I dont know how you tubers do it! There is no organization in how you guys just set your parts here and there! it is sometimes weeks and weeks before I can get back to finishing my projects. my regular job, trying to get parts or Information ON and ON......

[@CHEVYK10]

Don't disassemble till your 100% sure you have all your parts or your information in order

[@TorqueKingTV]

This wasn't an in depth procedure, just a basic overview. Our in depth videos are available for sale on our website.

[@anthonycook8737]

What year was this t-case out of? Did it have the 1" or 1.25" chain? Thanks.

[@TorqueKingTV]

Hey Anthony, If I remember right it was out of a 91 V2500 Suburban and had the 1-1/4 chain.

[@anthonycook8737]

@@TorqueKingTV thanks much.

[@wheels.and.wrenches]

The reassembly is the opposite of the disassembly. I can't believe I had to say this....

[@josephastier7421]

Awesome! Can you do a 5LM60 transmission next?

[@dsldrvr69]

Thanks mine just leaking from middle seam.

[@gabriel9377]

Good footage

[@raymondsteed4552]

Good info 👍

[@acelious]

do u have a link for a complete rebuild kit for these

[@TorqueKingTV]

I don't have a kit put together for these yet, but I have most of the OEM parts so I could put one together in a couple days. I would just need to know your assembly number and if your case is a right or left drop.

[@jameshurley182]

Is there a reassembly video?

[@TorqueKingTV]

There will be a detailed disassembly and reassembly video in the next few months. I needed bearing numbers ASAP so I just made this quick video on parting one out.

[@maxst2]

Play it in reverse?

[@tedhargiss1056]

How about a re-assembly video?

[@maxst2]

Do it in reverse?

[@tedhargiss1056]

maxst2...Easier said than done.

[@jasoneardley8113]

Mine disassembled itself going 90😂

[@infidel6608]

I would lay-off the cigarettes

[@TorqueKingTV]

Hmmm... that's probably a bad habit I wouldn't even want to start!

[@jasonworden8209]

Creepy dude...