25 Most Common DIY Mistakes When Wiring Outlets / Receptacles

[@JillofAllTrades2]

LOVE my combination bit driver. NO ONE touches that baby. Too many hacks who’ll screw up good tools in the blink of an eye.

[@jimchristy573]

Great video! One thing that I do that I know some others do as well. Put ground up on switched outlets and outlets that have a metal cover. I put ground down on all other applications.

[@Londubh]

I love how quick and efficient all of your videos are. As such, I am leaving a comment to boost engagement and feed the algorithm to your benefit. And subscribing. Thank you, so much, I'm loving this channel

[@rhoula]

I have literally watched thousands of videos online and have been working on Electrical stuff for over 25 years. I admit that I have learnt quite a few things from this video than from most of them. You just gained a new subscriber.

[@avagat0]

This is one of the most informative videos I've seen .. great work ! thank you for making it

[@LloydChapman-h9o]

in like to mention. ive used wire on top and bottom by curling each spare or extra wire to help make the box flush with drywall without those spacers for outlet like a coil-springs to fill the gap with the jacket left on wire its really good to know incase boxes are not set properly and cant be moved due to dry-wall being finished. dont want any angry drywallers coming after your boxes

[@wendys390]

Wow, that video was really good! Thank you so much!

[@Lecon60]

I'm so happy home owners like me are allowed to work on their own things. I do most work by myself.

[@Lecon60]

When I show others what I'm doing I explain the neutral wire and why it's important to know why the neutral blade is larger.

[@checo8187]

2:08 i trust this method more than relying on screw color, I've ran into incorrect screw placement on receptacles straight out of the box.

[@MattGoodfellow]

Holy cow, great video and covers a lot.

[@vinaySingh-ix3ej]

One of the best videos for DIY enthusiasts. Agree with one of the suggestions to include links to tools used.

[@rks515skr]

This video changed my life... incredible.

[@anomalousappleberry4214]

Absolutely helpful video!!!!! Thank you so much! Iam officially educated. Thank you electrical Teacher!

[@robertoiortega34]

Great video with lots of amazing facts and information! Thank you for sharing your knowledge!

[@DandDHenry]

This video was very informative. Simple, safe and simply explained. Thank you

[@zwclark-baldwin5225]

Using proper tools have proven to be safer; however it was indicated that some may cut corners by using inadequate tools. Our staff at Mr. Electric will not cut corners to lessen cost. I learned that by never leaving screws loose can also increase your safety. The entire video was very helpful and explained to simplicty. Good jobi

[@1brownss]

You're the second person that said something smart!! Now you The.. first Person. That's Smart!!!😮

[@madhiker123]

I found out that some wire strippers actually cut into the insulation of the wires when trimming the sheathing. That's why I now use electrical tape to wrap the ends of the sheathing. I even started color coding them: red for power in, black for wires to another outlet or J-box, blue for light or switch for light.

[@robertudave2439]

Awesome video, thanks

[@dr650dualsport]

Great video. Very well done. You should make more!

[@ironmartysharpe8293]

Whenever I install outlets , I always use the commercial grade , Even though it's back wired but what's great is you put the wire in the back and tighten the side screws because commercial grade outlets have a pressure plate that clamps onto the wire and you know you have a good connection Another thing I definitely do is that if the outlet is in a metal box or a plastic box , I'll wrap the side screws with some splicing tape first and then give it a final wrap with electrical tape to prevent the side terminals from grounding out and helps reduce the risk of electrical shock , Keep in mind that when using splicing tape is be sure to stretch it a little bit as you apply it The splicing tape does a great job insulating exposed terminals and also keeps the final wrap of electrical tape from coming loose I use only one brand of electrical tape and that's Scotch because those cheaper tapes eventually will peel away over time Also when I put on wire nuts , I'll wrap them with splicing tape first but you have to stretch it a little bit as you apply it , The splicing tape does excellent in keeping wire nuts secure , Then final wrap them with electrical tape , You only need just enough final wrap to cover the splicing tape The final wrap keeps both the splicing tape secure and keeps the electrical tape from peeling away over time Splicing tape is excellent to use for insulating and securing wire nuts but be sure to give it a final wrap with regular electrical tape to keep it in place , The final wrap with regular electrical tape also sticks much better to the splicing tape than anything else and because of how great it sticks to the splicing tape , It'll never peel away over time

[@JamieMurdock90]

Do you have any links to studies that confirm a genuine benefit to over wrapping wire nuts with tape?

[@joshscott8678]

The only time I wrap wire nuts is when installing ceiling fans, range exhaust fans, or bathroom fart fans because of vibration. Otherwise tape on wire nuts is suggesting a bad connection in the first place. If you need tape to hold your tape, you need to start over with a new roll of tape. Anything more than 2 laps around an outlet or switch using a metal gang box would guarantee an automatic "W.T.F.!", from the next person opening said box.

[@JRW10S]

Ok ( 1 ) you forgeting some outlets the slots are same size ! 2) some outlets have 4 slots on both haves of the outlet ! 3) some outlets are modular design , it has no scew terminals ; and two tabs that hold it in the wall like a " draywall box " ! 4) some outlets have " 1 vertical slot and 1 horizontal slot "!

[@llewellyn56]

very helpful thank you

[@JPayne95]

I do love a wago, they make life so much simpler.

[@victormartiny6419]

Thanx. Excellent video!

[@TassieDevilDave]

Thank You so much I have been trying to crack it since 2 days.. Finally it worked.. thanks

[@davezemba9109]

I think he has the circuit breaker wire size and outlet type backwards. 6:12

[@stevewilliams1197]

Very good video. Easy explanations, great illustrations and good information.

[@surferdude642]

On number 16 you showed how to use the sheathing stripping tool from Ideal to assist in tightening the wire nuts. I have that tool and tried what you did and it works great for a variety of wirenut sizes. Much easier on the hands, thanks. I like to pre strip the sheathing about 9 or 10 inches before placing the cable in the box. I use a Klein wire stripper with a 14/2 and 12/2 sheathing stripper. For a pro it's probably not the best because it may be slower, but as a diy'er where speed is of no concern, I find it to be a good method.

[@veronicarueckert6323]

I 2as about to ask what that tool was for tightening the wire nuts! Thanks for the info!

[@michaelallen5505]

Combination tip screwdriver also called an ECX screwdriver. Yes please. You won't regret it. 😊

[@thomasschwarting5108]

Very good video!! Never seen that bit, or at least if I did, I didnt know what it was for. What's that bit called again? I also really like those wago connectors.

[@donaldwood9187]

I agree with most of the items you mention. But... UL may disagree with you on how to wire outlets. The push in wire connections on the back of the outlet is UL approved for 14 gauge wire ONLY. #12 wires have to be wrapped around the screw. Also, although if you have multiple #14 wires in a box, pigtailing them is much better like you said. But UL allows four wires on the outlet. And some other things UL allows. So the point is. What you have taught DIYers in your video is good. But If the product and techniques used, are UL listed and "approved for the purpose".... you are allowed to legally do it.

[@TheRiddler491]

Backstabbing is allowed and UL listed. They still suck regardless of gauge. Don't do it especially for circuits containing multiple outlets. There is just a small little metal tab locking it in place and can be a significant point of failure. Just use the screw or clamps that you see in devices, like in GFCI's. Remember, code states a minimum. Products might be listed for it, but it doesn't make it great either. Much like splices. Wire nut manufacturers often state that you don't need to pretwist, there's a large debate about it, but I personally pretwist to get a solid connection and won't have to worry about the spice coming apart if the wire nut is removed. Just my two cents

[@eusebiohernandez2898]

Can I properly insulate a outlet plug this current cold front we had a lot of cold air coming in from the plugs?

[@haileymblack]

Yes. Duck brand makes a product called socket sealers. You can buy products at hardware stores that are designed for this purpose!

[@benwhittle7204]

Can you put a 20A outlet on a 12AWG, 20A breaker circuit?

[@jimsteel7483]

Great video. Now preparing for my first wiring (a shed), I'll need to watch it a few more times.

[@abc947]

To be honest, using the right Hole, applies to many different situations.

[@dustingoffron2252]

Use a level when you’re installing the outlet since your box may not be level. Just looks better when you’re close to a baseboard or backsplash or tile lines

[@welmultiskilledtv]

Nice tips lods and share this video new fan of your channel

[@sigcrazy7]

#26 Referring to receptacles as outlets.

[@netog4260]

In vertically mounted receptacle why is the ground slot below the power slot? I would think that its better on top so that if anything drop in the gap (if there's any) it isi safe.

[@ExtremeEngineering]

thanks

[@merrifieldgalos6248]

Thank you. Only possible in USA. In Australia don't have all these easy thing available. Often they don't have ckt box. Just inside the dry wall, screw with stud.

[@paulmaxwell8851]

I know, I've seen that! Very odd indeed, but Australian homes are not burning down, so what do we know?

[@ThreePhaseHigh]

I’m on for doing things right with torquing the screws in your outlet receptacle isn’t one of them . And as far as the ground hole on your receptacle, if it’s down, it’s correct if it’s at the top it’s stupid, but either way works.

[@PowderMill]

Nice job… 👍🏼 I’m a retired commercial electrical contractor (& volunteer firefighter / paramedic and later on.. fire inspector / countywide AHJ) and have long been worried about DIY electrical work . With modern sources of information like KZbin, at least the DIY’er can obtain solid info and tips to make their work as safe as possible. This video was excellent in that regard. Possibly include links to the tools and accessories featured in the presentation?? (precisely how many viewers are familiar with the different types of screwdriver bits available?.. probably a low number..?) Oh well.. Thanks again.

[@TomCee53]

Great video and nice supportive comment. While I agree that there’s a wealth of useful information on the internet, please remember that there some misinformation as well. I tend to dislike opinions phrased as fact. I applaud videos that encourage checking with local authorities and deferring to professionals when unsure.

[@aaronbeaty3980]

The last comment: This gets into grounding vs. grounded. If a conductive surface falls against the hot and neutral, you have a problem. "Last to make/first to break." Put the single pin at the top. That is also why the 'hot' is the shortest of the three. Neutral is the middle. Grounding is the longest.

[@JamieMurdock90]

Where is hot shorter than neutral?

[@JRW10S]

Not all outlets have a long and a short slot ; meny houses still have the outlets with the 2 short slots !

[@MrTachyon3000]

Another tip. Don't assume there are only black and white wires and green for ground as in your video. Mine have blue and red ones mixed in as well. So you really need to figure out which one is the hot one and which one is the neutral without relying on color.

[@romein138]

how?

[@MrTachyon3000]

@@romein138 Well the hot one you can just pick it out of the bunch with a voltage tester. You start by shutting off the circuit breaker and separating wires to later identify them. You can use electric meter too or such tool. Sometimes there are a lot of wires in out outlet and some are feeding other outlets so you have to know a little about electrical. At times I've had to have a pro do it; I know my limits.

[@michaelallen5505]

My burned up, melted, back stabbed outlets looked way worse than those. It's amazing my house didn't burn down. I went all through the house and replaced those suckers with commercial grade.

[@sais9221]

I checked my breaker for one of the outlets in my kitchen, it says 20 amps but I see the wiring leading to that 15 amps receptacle is 14/2. I'm so confused. I plan to diy adding a new outlet in the cabinet for my hood range fan but this is throwing me off...

[@BruceW-f8g]

7:43 I twist the solid wires first with Klines then screw on the wire nut the correct direction those clips are the same as straps on the back of the outlet. Pigtails made with wire nuts is a better condition. One wire per screw

[@cherie5454]

Do they make 4 wire wago levers?

[@imark7777777]

Excellent. Although ground up as has started to become code much to the smiley faces demise. That rubber band looking things neat I've never seen that before although I bet it's more expensive than tape. Stranded wire and electrical caps can protrude a little bit.

[@ccc822007]

black gold, white silver

[@electricianron_New_Jersey]

Outstanding video! I'm a licensed electrician just fishing for something incorrect I could not find anything wrong. Good job!

[@ironmartysharpe8293]

Hello electrician Ron , One thing I discovered is whenever I wrap the side terminals of an outlet or switch for added safety , I began using splicing tape first , Of course you have to stretch it a little bit as you apply it Then final wrap it with electrical tape , What I discovered by doing this is that the electrical tape sticks much better to the splicing tape than anything else and will never come loose over time , Also I'll use the 1 1/2" wide electrical tape for the final wrap because you use less than the 3/4" wide and doing the final wrap with the 1 1/2" , Just go around once with it and I only use one brand of electrical tape and that's Scotch 33 or 88 electrical tape and it's available in 1 1/2" width

[@markh3478]

I'm 63 and wish I'd seen this video when I was 23 . Thank you . By the way I like to 3M electrical tape wire nuts after checking wire security . I've seen both taped and not taped - are there guidelines whether to tape or not ?

[@glasshalffull2930]

I’m 63 and an engineer and have been wiring things at work and home since I was a teen. I’m just not a big fan of taping wire nuts. It’s just a big mess if/when someone has to go into the junction box. The tape is all stuck together and isn’t easy to remove and then you’ve got the tape residue. I’m guessing a lot of folks just cut the whole mess off and this is how you get wires that are too short. As far as I know, it’s not code either.

[@Matt-my7pz]

I'm a master electrician in Canada and the wires should really be held together by the twisting of the wires if they are solid. Stranded should still be linesman pliers together. The marrette does gives structure but should be what the splice relies on. Taping is not necessary as far as regular electrical wiring.

[@chuckschneweis-realtorbyex8052]

What is the screw driver bit called, where do I get that and the copper attachments that look like fuses?

[@donaldfrapwell4116]

Milwaukee makes an ECX #1 bit for that.

[@haileymblack]

Wago wire connectors can be bought on Amazon and hardware stores are starting to carry them as well.

[@ynagpaul]

Thanks for preparing the beautiful video. It’s truly informative and educational, only thing which I feel could be done to go a little slower. Again, thanks for the educational material.

[@michaelmedina3193]

In my state code is insulation has to be inch of insulation inside box

[@CedricLlwyd]

As a brit... that ending clip hit too hard... I literally felt it >

[@CroftyOriginal]

Here in the UK we are told to never really loop around anything, to know all your outlets are like this gives me the chills lol. The outlets in the US just seem so flimsy, the ones here are so much more sturdier.

[@richardoakley8800]

I'm horrified that live terminals are exposed..

[@playgroundchooser]

They really are. But they're really cheap. Most codes say there has to be an outlet every 4-8 feet depending on location, so you need a lot of them. Also, when you're only running 120v through them, a gap of only 1/16th of an inch is more than enough to stop any current gap jumps. When replacing outlets, I often don't even throw the breaker. 🤣

[@playgroundchooser]

Oh, forgot to ask: of you don't loop, what do you do? Cheap, shitty installation here just pokes wires in the back.

[@CroftyOriginal]

@@playgroundchooser We have actual holes that you put the cable in that goes right into the socket and then a screw pushing inside which clamps it tight, you cant really touch anything that's live. Then if we are using only a single cable you double it back on its self.. Bend the end over giving it a much better grip. We are slowly moving over the the lever type now, like a Wago which is even better. Like this m.media-amazon.com/images/I/61RCAayQFYL._SL1500_.jpg

[@playgroundchooser]

@@CroftyOriginal absolutely better without a doubt! I'm amazed at how few electrical fires there are here in the States to be honest. And most of them aren't in walls, they're caused by cord/appliance issues.

[@williamkacensky4796]

Not a electrician but I have to assume the current is traveling back to a continuous loop? So what would happen if this same scenario was used but the other electrical box had lights. Would they turn on or trip the breaker?

[@kennethmoore338]

You should correct where you say it's not ok to put a 20 amp outlet on a 15 amp circuit, but is ok to put a 15 amp outlet on a 30 amp circuit, you have it backwards, the 20 amp outlet doesn't matter on a 15 app circuit. And The 12 gauge 20 amp circuit is to much for a 15 amp outlet.

[@robertchua5437]

Can I replace my 15A breakers and change my outlets to 20 amps

[@ScottDLR]

Only/ if the wire is 12 AWG

[@ironwood9]

#11 you said not to run the wire the "wrong way".... What is the wrong way I would think it would be counterclockwise because when you tighten the screw you're going to be tightening it clockwise and you want the wire to run clockwise as well I would think...

[@ironwood9]

"run/loop, whatever... never heard the term "cam out" that's great thank you

[@ProfessorDIY]

These "mistakes" are also very common among professional electricians.

[@gene9230]

I do not get Nr. 8, in Europe all modern outlets do not even have screw terminals, only push in connectors, never heard of problems with them.

[@linlyons1962]

Wa'da'ya mean pull the breaker. If you do that the lights all go out. And it's only 110 - just a little, "OH, don't touch that" reminder. In the '60s I worked in a lab where all the extension cords had a plug on one end, and alligator clips on the other end. 110 = Ack don't touch that. 220 = DON'T TOUCH THAT. 440 = religiously don't touch that. Old electrician replacing dad's fuse box with circuit breakers just touched the various circuits with thumb and index finger. "Uh 110. 110. 220. 110." (licks his fingers) "220. 110" My skin isn't that tough, but 110 isn't all that bad.

[@glasshalffull2930]

It’s not the volts that’ll kill you, it’s the amps. Get the right conditions and as little as 300 milliamperes can kill you.

[@larrylynn5047]

B.S. #3 has been use for many years. Only a rookie would say don't use... #7 only would be suggested by a rookie. #8, has been done for over 50 years. Myself never a problem. #15 never had a torque driver, they were not invented until just a few years ago. #16 that's all the old timers used, always make sure wires are twisted before wire nut, didn't have the other.. #19 most old wiring jobs already have metal boxes, always ground the box. granted, I'm an unlimited journeyman electrician. with over 48+ years experience. Electricians like myself, are the reason for code books...

[@Matt-my7pz]

#3 is not the way the guys I worked with worked. A hooked blade was way quicker and safer. Wether it was a large hook blade or disposable roofing blades, this also doubled for stripping teck. A straight utility blade is a rookie move.

[@Matt-my7pz]

I don't agree with #16. Wires should be twisted together prior to the wire nut. It only makes sense

[@RadioRich100]

Just like flip lever outlets and wagos these cause the same issues.

[@miguelmcclelland5306]

Why do you ground a metal box if it’s not connected to conduit

[@jaedenspider877]

I have my own electrical training system that only uses a few batteries

[@_TheDoctor]

If we can't backstab an outlet, why do they make it an option?

[@checo8187]

You can, its just not as good and safe as wrapping the wire on the screw, over time backstabbing tends to come loose more often than a correctly wrapped wire.

[@paulmaxwell8851]

I'm not aware of any Code prohibition regarding backstabs. I'm not aware of any evidence that they are inherently unsafe. However, I never use them. They APPEAR unsafe, but that may be entirely wrong.

[@glasshalffull2930]

@@paulmaxwell8851 It is approved by code, for now, but has fallen out of favor because of problems such as failure due to bad connections and burnt receptacles. If you spend much time reading the comments on electrical videos, the back stab method is almost universally condemned. Also, a backstab hole is only approved to be used once and this adds a possible failure if used a second time.

[@rubenj3128]

Looks very dangerous those metal boxes with a little tape to not make the screws touch it😂 I don't understand why that's even allowed. Also those pigtail screws is just screaming to fail. Europe stuff looking way more solid.

[@carlthornton3076]

Very Good!... #68 ✝ {12-3-2022}

[@TomCee53]

Some of these are not “mistakes” but fall under best practice. You stated opinions as if they are fact. If in doubt, check with your local inspector.

[@josephwood1980]

All outlets have the stripper and looper built onto the outlet

[@Outrightpower]

Since when are there more than 2 wires on a plug?

[@Johan-bc9nl]

why solid wire to use gruond ;;;; stranded safety to box ;;

[@jshawnrittenour2665]

I thought you couldn't put 15amp plug on 20amp breaker but u could put a 20amp plug on a 15amp breaker! Did you say that backwards?

[@marrionward2456]

Dont assume the white wire is a neutral ,especially in switches.People use the white for a hot and dont put black tape on the wire.

[@jacobgreen6939]

gfi gotta be white to silver black to brass. or no can do.

[@paulmaxwell8851]

Overall, good video. But NO-ONE here in Canada would consider wrapping a receptacle with electricians tape. That's the sign of an amateur. My inspector would roll his eyes. I'm a retired building systems professional with electrical ticket.

[@mattdude]

Why is ground up safer?

[@paulmaxwell8851]

It's not. That's an old-wives tale.

[@glasshalffull2930]

The theory is that if the plug were not fully inserted and a metal object fell it would hit the ground first and not be hot. In some areas I’ve lived, I’ve seen ground up as an indicator that the receptacle is controlled by a wall switch. Half the receptacle is hot all the time and the other half is switched for a lamp.

[@gyrgrls]

Why measure torque on screws? The correct torque is about 1/8 turn before it strips.

[@vincent-jy9on]

Don't show people to just twist a wire nut onto 2 wires being held together. You have to twist the wires together with your pliers so they will stay together even if the wire nut fell off in the box. that's the code rule

[@carlberner3797]

CANNOT USE A DAM GFCI WITHOUT A GROUND!

[@hammerit4409]

I don't understand why you green/groundwater to the box, then pigtailed. Why not just ground around the ground screw and leave 6 inches after..same result.

[@brandonboyce4180]

I would argue this is a better installation. The less amount of field splicing, the better. I always try to leave one of my ground wires a good 8 inches longer to wrap directly around the ground screw, then hit my device/ ground bundle

[@bdf2718]

For maximum safety, have the ground at the top.

[@bdf2718]

@Maldoche I have no idea what the connector checker is since I've never seen one of these things in real life. The ground connection is solid regardless of orientation. It's the first connection to make and the last to break, so it's there when the other two are. The ground connection is made by a springy bit of metal in the receptacle. Orientation is irrelevant. Now consider a plug that is partly withdrawn but all pins are still making contact. Drop a metal object into the gap - a knife, for example. Try to grab the metal object as it falls. Do you want it touching ground or hot? It's safer with ground up. But it's usually installed with ground down because it looks like a smiley face. A smiley face that can lead to a frowny face.

[@playgroundchooser]

And not have my happy little fleet of outlets smiling at me? I think not my good fellow! 🤣

[@rustyfairmount]

Ground Up = Maximum Safety is a wive's tale. There are several times when ground-up is less safe. Specifically, when the cord being used has a 90 degree angle, ground up will cause the cord to kink. Upside-down power bricks can vibrate their way out of the wall. Ground up does have advantages in commercial settings (more stuff getting plugged in; metal faceplates; more vibrations; etc). But in residential settings ground down is still the best way to go. All that said, NEVER mount with ground to the right. That puts hot on top.

[@tedlahm5740]

@@rustyfairmountNotice, all receptacles in Hospitals are ground up. comment please

[@gregsteed870]

I don't believe those wagu quick connects are csa approved for Canada

[@xilnes7166]

trouble shooting the lamp idea wasn’t such a big issue issue just plug it in another socket to see if lampworks. and if big appliance then test the socket by plugging in a phone charger. The cons for me is the size of phone chargers on British sockets especially while travelling due to the shape of the 3 pins there is no easy way to pack it , imagine carrying few cables or chargers (laptop , phone , camera , hair dryer or trimmer chargers ). Apple now has got this foldable charger which folds 3 pins nicely to form a squarer shape when folded. before that I just buy the US pin charger for everything (240v ofcos) and carry one traveller converter socket all cuz its hard to fit these into a carry luggage.

[@daydreamer77w46]

Too two technical after you said spec respect and lupine a ground wire to what where help

[@notryan2496]

For maximum safety, always remembered, something, no wait whatchamacallit, dammit. I forgot.

[@lawrencejneuser8801]

One thing I don't under stand Is how come they place outlets so close to the floor where children and people can get hurt A lot easier. Did you ever notice that the top outlet always wears out first? If you want to plug something in, The damn outlet is always behind something which makes it hard to work with. They should make outlets at least three feet off the floor. One, so an adult can get to it, and two so a child Can't get at it. And the outlets will wear evenly.

[@sals.5768]

Whats wrong with back wiring its made to be used

[@robertstack2144]

Having all these safety GFI, GFCI, AF/CFIFBICIA has all but eliminated wildfires in California, from outer space, at night, looks like North Korea

[@SenpaiGrasshopper]

on number 16, you used a wago. as simple and easy they are, they are NOT good connections. they’re about the same as backstabbing an outlet. i’ve seen them burn up and fail. (also kind of annoys me you didn’t pretwist before you stuck the wire nut on, but that’s also coming from somebody who works in the field.)

[@wofpup6507]

Why are Wagos bad vs Wire Nuts? Wouldn't it be a code violation if Wagos were a fire hazard?

[@rufogallardo7168]

using the wrng hole or rocking the strippers is not good, DAMN DUDE, I had to pay exxtra money to do both and you are telling I have been doing wrong, I feel scammed.

[@ElEheyeh]

I can't say your wrong but alot of these aren't actual mistakes but just nitpicking

[@glasshalffull2930]

I think you’re “nitpicking”!!! 😂 Perhaps he could subtitle the video ‘And Best Practices’.

[@BryanChance]

25 ways, how many ways are there to wire an outlet? LOL

[@pcar5]

Number 26...not using conduit for all wiring. Friends don't allow friends to use Romex.

[@paulmaxwell8851]

You're joking, right? The Code has never, ever required that, and no homebuilder would ever consider such a thing. Are you one of those people who make the kids wear crash helmets to play in the backyard too?

[@glasshalffull2930]

My recollection is there are a few cities, one I think isChicago, that require conduit. IMHO, it was just a way to keep the electrical unions employed.

[@merrifieldgalos6248]

It is not DIY or licensed electrician. I have seen licensed electrician work so dangerous. I am fixing them , and I am diy person. This is matter of who cares and don't care.

[@mikeminnon8285]

Agreed. Just because someone is licensed does NOT mean they do great work or even safe work. Every area of life is like this. It's the person NOT the paper/ license they hold.

[@zzzzxxxx980]

By g

[@ryanespinoza7297]

My house was owned by an electrician previously and it’s down right scary some of the things I’ve come across especially in the garage. Loose wires running along rafters, splices held together with only electrical tape, 30 amp fuses (yes, fuses) in 15 amp circuits, etc. It’s a miracle it never burned down in 70 years since it was built

[@patterdalezipsuzilil]

Simple DIY is not correct all electrical work should be carried out by a qualified electrician

[@paulmaxwell8851]

No, the Code does not require that all work be done by a licensed electrician. It's perfectly legal to do your own work.

[@glasshalffull2930]

Would that be the same “qualified electrician “ that backstabbed every receptacle in my house???