#254

Рет қаралды 3,557

Күн бұрын

Пікірлер: 62

@KAMiJUINs Ай бұрын

Considering that most AT board riders mainly ride on the pavement, a decent combination of drives and tire settings was something I wanted to share. If you're thinking about a decent AT board setting on the pavement, I'd like to present this combination that I showed you this time. 대부분의 AT 보드 라이더들이 포장도로를 주로 라이딩하는것을 고려할때 괜찮은 조합의 드라이브와 타이어 설정은 공유하고싶은 내용이였습니다. 만약 포장도로에서의 괜찮은 AT보드 설정을 고민하고 계시다면 저는 제가 이번에 보여드린 이 조합을 제시하고 싶습니다.

@kylevilme6351 Ай бұрын

I really love that your videos don’t have a bunch of talking like other KZbin’s and it is just calming music and ESK8 asmr ❤❤

@kylevilme6351 Ай бұрын

Do you have a playlist with all these songs because I would love to listen to it

@KAMiJUINs Ай бұрын

Each video description has a background music source. Please refer to this.

@KAMiJUINs Ай бұрын

Thank you for watching and hearing :)

@lordleverton954 Ай бұрын

The best eskate vids on the net. Beautiful. Great work.

@fujio001 Ай бұрын

I feel so relaxed after watching his videos.

@KAMiJUINs Ай бұрын

Thank you sooooooo much :)

@KAMiJUINs Ай бұрын

Thanks as always, bro :)

@eBoard3R Ай бұрын

*Oo weee* 🤙🏽⚡️🤟🏽⚡️👌🏽 Super wide and cleeean AT wheels got the board lookin like an F1 car 🤩 Looove the carvin at 6mins 30seconds 🔥🔥

@KAMiJUINs Ай бұрын

In particular, the buttocks were wide and thick, which made them look great lol. Thank you for coming again, bro :)

@hellohogo Ай бұрын

This looks so much better than the meepo linnpower stuff from before

@KAMiJUINs Ай бұрын

Maybe it's because the wheels are different that it looks that way. And thank you for watching :)

@TheEVside Ай бұрын

Always a great video buddy hope your doing well

@KAMiJUINs Ай бұрын

Hi~ Brother :) Long time no see! I'm good!, Hope you are doing well too with your family!!! Thanks :)

@worachart111 Ай бұрын

Nice gear drive

@KAMiJUINs Ай бұрын

Thanks bro :)

@jahol86 Ай бұрын

Nice job 👍

@KAMiJUINs Ай бұрын

Thank you for watching :)

@3percentproject687 Ай бұрын

What a beautiful black beauty.

@KAMiJUINs Ай бұрын

Thank you for watching :)

@VoltVentures Ай бұрын

HAIIII AGAIN LOVE THE BUILD :))) also just found it funny u used racing wheels that said ONLY FOR RACING!!!!

@KAMiJUINs Ай бұрын

Thank you for watching :) Yes, that's what it says, but in my experience, all riding styles are satisfactory on paved roads.

@OdoPen Ай бұрын

When Will you check the new MBS Agent?!

@KAMiJUINs Ай бұрын

I wish I had the opportunity to review too :)

@scstudios8 Ай бұрын

Bigger wheels are a huge factor in making the board fun to ride. With a 90mm poly wheel, you have to constantly look at the road to avoid crashing. When the wheel is around 150mm and rubber, that changes everything. I have an AT board that is the solid rubber meepo wheels and it is perfect. No air and rolls over big cracks. Air tires are amazing, but I fear a flat. I debate making a crash bar on the front of the board with a spare tire there so I can have a spare tire and belt. When you are 8 miles out on a ride, a flat can change everything.

@seankelly5318 Ай бұрын

The spare tire sounds like a great idea.

@wilsgrant Ай бұрын

I have yet to have a flat after 1k miles, I'm glad I didn't let fear of flat prevent me from enjoying riding on air.

@JRP3 Ай бұрын

Just carry a spare tube, not a whole tire.

@fujio001 Ай бұрын

The tires and wheels you choose can make a big difference too. The tubeless wheels sold by Meepo, MAD and Linnpower can run with no air pressure. It is not recommended to ride any tire with no air but it can get you home in case of an emergency. There have been a few occasions where I didn’t even know I had a flat. To give you another example, there was a racer at ESK8con who was riding a Hurricane with 4 complete flat tires. Didn’t even notice until the race was over.

@fujio001 Ай бұрын

I love the Linnpower racing slicks for general road riding. The grip and stability are extremely good. Also, the balance of the tires is very good. I rarely need to balance them. Keep in mind the rubber is very soft and prone to punctures and cuts. The sidewalls are so stiff that you can ride them completely flat in case of an emergency. Regardless, if you are looking for the best quality ride and are willing to do a little more maintenance, these tires are class leading.

@tonytober Ай бұрын

How's range impact versus polyurethane wheels? And versus Onsra/Cyclone airless tires?

@KAMiJUINs Ай бұрын

This tire is a performance tire. That's why it has a wide contact patch and therefore has a lot of friction with the ground. That's why the range is not as good as the PU wheels or airless tires you mentioned. If range is important to you, I can't recommend this tire.

@filmedbygus5429 Ай бұрын

Love your videos man! Could this be done to the white Ares X3 gear? I’ve been wanting to install bigger tires…

@KAMiJUINs Ай бұрын

It seems impossible because the adapter size is different. Maybe they can make an adapter for X3, so let's wait and see.

@filmedbygus5429 Ай бұрын

@ what if I switch off the gear drives?

@KAMiJUINs Ай бұрын

If you also change the gear drive, you can install it in your X3 with these settings and combinations.

@delburger8978 Ай бұрын

Hi Kami tha ks for the videos awesome content, would these wheels fit on a Lorentz v2?

@KAMiJUINs Ай бұрын

No, I dont think so. Installation is not possible because the gear drive adapter specifications are different. Thank you for watching :)

@lokhandwala69 Ай бұрын

Hi Kami,excellent video! I have a question,this v4.3 geardrive works with omw hussar with CNC dkp?

@KAMiJUINs Ай бұрын

Yeah x 1000 Thank you for watching :)

@ritzpunsalan2149 10 күн бұрын

is there any way i can modify my propel endeavor 2 gt to have wider wheels and other company hubs. also with gear drives from other companies? i love looking at your videos for more ideas in making fits for my boards.

@KAMiJUINs 4 күн бұрын

As far as I know, the combination part of Endenver's truck and motor mount is not common and cannot be used.

@Steven-qm1xo Ай бұрын

I would like to see four gear drives on the 4wd X1...

@KAMiJUINs Ай бұрын

I understand what you're saying, but it might be a waste of battery power for me. Still, I'll consider it if I get the chance :)

@Steven-qm1xo Ай бұрын

@@KAMiJUINs great board i have the X1 OG

@boostedchicken2739 Ай бұрын

오호. AT 타이어가 마음에 안들어서 PU휠만 봐왔는데, 이건 마음에 드네요.

@KAMiJUINs Ай бұрын

저도 포장도로 라이딩은 PU휠을 선호하는 편인데 타이어를 사용해야한다면 이게 젤 맘에들었고 좋았습니다.

@timmeey6902 Ай бұрын

They look like nice wheels, but Ive been finding lately that I overheat the maytechs on both my pneumie boards in less than 15 minutes on the street. Would it be fair to assume these wheels would probably buddy up better with reacher motors? Im thinking about ordering two or three sets judt need to decide on kv.

@KAMiJUINs Ай бұрын

Can you tell me the current specs of your board? (Motor KV, gear ratio, wheel size, ESC current) If you tell me, I will answer to the best of my knowledge. Thanks :)

@timmeey6902 Ай бұрын

@KAMiJUINs 18S8P, 200mm, Maytech 6389 80A motor current. Max speed normally about 60-65kmh. Stock standard LaCroix. 12S10P (18650) I a prototipo, with some funky deck alterations / glass laminations to fit double stack. 175mm evolve tyres, Maytech 6374 170kv I think, 90A motor current. Max's out about 55kmh. When I've stopped and checked vesctool each motor is typically 28-30Wh/km. I assume I just need to order some reachers for both boards. Surprised more people don't complain of hot motors.

@KAMiJUINs Ай бұрын

As far as I know, even if the same amount of current is sent to each manufacturer's motor, there is a difference in the amount of heat generated depending on the motor efficiency. It seems that the Maytech motor has a higher efficiency but generates more heat. Also, it is expected that the power consumption will be higher because of this. For reference, many people are currently choosing the motor below as the best. If you want to replace the motor, consider it. radium-performance.com/collections/motor-mounts And to use this racing tire, you need a hub with a thickness of at least 60-65mm. Please check the thickness of the hub you are currently using.