25hr Honeywell Generac Generator Maintenance on 22kW Oil Change Air Filter Battery Check oil change

Honeywell 22kW Generator maintenance requires an Oil Change, Air filter, Valve Clearance and Battery check after the first 25 hours of operations or 1 year after installation.. This video will show you how to do that except for the Valve clearance since my generator had only 6 hours of run time but was 1 year old. Skill level necessary is Beginner. Normal service call could run around $250. Actual parts cost is less than $40.
Generac 7043 22kW Air Cooled Guardian Series Home Standby Generator with 200-Amp Transfer Switch #ad amzn.to/4cMLBzw
Generac Oil filter (10kw-24kW) Part# 070185 #ad amzn.to/3WWXbCm
Generac Air Filter (14kW-24kW) Part# 0J8478 #ad amzn.to/3X1pI9S
Generac (20-kW-24kW) Maintenance Kit Part# 0J93230SSM #ad amzn.to/3T6PGHV
Chapters
00:13 Maintenance Schedule discussion
01:45 What you need to do the job
02:25 Unlock Generator Lid
02:39 Turn off Main Circuit Breakers
02:52 Removal of front panel
03:03 Run Engine to warm up oil
03:32 Description of Engine Parts
04:03 Side Panel Removal and Battery Inspection
04:46 Replace Air Filter
06:14 Drain Oil Procedure
07:13 Removal of Oil Filter
07:36 Install new Oil Filter
08:40 Refill Oil and check Oil Level
09:03 Start Engine & Check Oil Level
09:23 Turn On Circuit Breakers & Replace Front Panel
Disclosure: As an Amazon Associate I earn from qualifying purchases.