27cc Craftsman leaf blower carburetor clean and test.

[@SuEnRoD]

Keep this trick I devised years ago for the future when you do carbutator cleaning.. Try this... Heat the plastic tube from the carb cleaner spray with a lighter (about 1/4-1/2 inch from the end. Then pull on each end of the tube to stretch it. This makes the outer/inner tube diameter smaller and more of a pin point. When the melted plastic solidifies, use small wire nippers or nail clippers to snip the tube at the smallest diameter that still provides flow when spraying. The cleaner comes out like a pin point pressure washer and the shrunken plastic tube end fits snugly inside whatever port your spaying thru. You can also do the same to create 90 degree angles in the plastic tube to spray sideways inside long venturi tubes. (Like idle circuits) I used to make/keep custom tubes around for these situations. Hope this makes sense.

[@ktoutdoorsman7464]

That’s great info, thank you. I can’t believe I never thought of that.

[@laexpress]

Did you ever order the correct Carb ? I have the same blower. Mine won't idle. Wants to stay in chock mode