ECHO Blower Wont Start "Easy Fix" Carb kit Fuel Lines Primer Bulb Tune-up

[@DarrelHall]

That has got to be the best instructive video I have ever seen. No beating around the bush. Described every move. Thanks.

[@IFIXIT4U]

Wow, thanks! Glad it was helpful.

[@sovrgnman]

Now this fella does a good presentation!👍👍. Camera stand, steady and focused. Quick and only speaking needed to support the project, not wandering all around the world . Fast disassemble and replacement with power tools (IOW fast) , and it worked, 😂. Only thi g I'd add is to check the muffler spark screen, and even pull the muffler to check the exhaust port. They carbon up a lot, and will run like CRAP , but costs nothing to check and fix. 🙏🙏. This guy deserves subs and thumbs up's.

[@Calvertron]

Great video, love the southern accent and humor! 😀

[@IFIXIT4U]

Thank you! 😃

[@Calvertron]

@IFIXIT4U I would pay you $10, for you to make a video where you just say oil 10 times. lol

[@IFIXIT4U]

@@Calvertron 🤣

[@pooneej]

THank you for this video. Saved me a trip (not close) to the small engine repair shop and $$$. My 25+ yr old Echo PB-46 HT is running just fine as it has for that long after following your instructions.

[@IFIXIT4U]

Great to hear!

[@garyakins5392]

Thank you! A very well done video. I was gifted an Echo blower and it's been somewhat problematic. Just ordered a new carb after some unsuccessful trouble shooting today. I'm pretty sure that's were the problem lies. Your video will be very helpful as I replace the existing carb.

[@IFIXIT4U]

You're welcome, glad it will be helpful!

[@dcrickerson7611]

Man, just what I needed. Great video! I went back and watch your other video as well. Thanks so much for your video's they are such a big help to me and many others.

[@IFIXIT4U]

Glad you like them!

[@josearzola3070]

VERY helpfull .You are a great teacher and your approach is very wise .don't create extra work ,i will be adopting it moving forward.Thank you very much have a great day.

[@IFIXIT4U]

Glad it was helpful!

[@MrBucidart]

👍Best video from you in a long time, the trains are nice, but this is some good stuff here.

[@IFIXIT4U]

Thank you very much!

[@DanielBecnel]

Great video!!!!!! I have same or similar blower and had leaking primer ball but runs fine. I changed the fuel lines, filters, primer, plug, fuel and never took carb off. But after I put it back together it bogs down when I pull the throttle? Any ideas what I did wrong? Thanks for the great advice!

[@raulhernandez5293]

Thank you for this is very helpful Video thank you God bless you

[@IFIXIT4U]

You are so welcome

[@chrisharris6834]

Thank you for the links. I think the previous owner of my blower had tinkeritus. It may be good for me to just buy the new carb!

[@stevemoore6245]

excellent knowledge!!! what a great find!!

[@IFIXIT4U]

Thank you!

[@WilliamLoney-y8k]

I have a Echo pb-250 2010. New carburetor kit. I had it running. Today I went to stsrt it. I believe that I might not have the lines correctly I think I cut them to short. Its the model with the purge bulb underneath. I would greatly appreciate it if you can help me. Thank you.

[@texanthom]

Nice find! Should be able to get your money and time back on it!

[@IFIXIT4U]

Thank you

[@CHRISTOPHER-m3g]

Do you have a knob replacement vid for a leaf blower push mover esp on or off cap

[@MrBmoll5858]

Awesome video

[@IFIXIT4U]

Thanks!

[@henryt8954]

You’re really good, thanks .

[@IFIXIT4U]

Lol. I appreciate that. Thanks.

[@christina5588]

if your tool has a tooth on the end its called a kocher clamp fyi Very Nice Vid thanks.

[@stevemoore6245]

carbs are like evil spirits, remember the carter carb, banging on the side when the float stuck.

[@edgardomatos7742]

Great video 📹 👍

[@IFIXIT4U]

Thanks 👍

[@em77038]

Great video ✔️✔️

[@IFIXIT4U]

Thanks for the visit

[@stevejensen3471]

Great vid. And you got a primo Zama carb. I got a Walbro from a PB 250 I have to rebuild and apparently the damn fuel line kit from Echo no less doesn't fit the PB250 although it fits the PB250LN. So was wondering where you got you stock yellow and black fuel line from because I need to order some. Also interesting that you can use seafoam and wd40 on this carb and not have those fluids interfere with the carb?! Thought only premix should be used?

[@jesse8614]

great video thank you

[@IFIXIT4U]

Glad you enjoyed it

[@gRosh08]

Awesome! Thanks for sharing.

[@IFIXIT4U]

Thanks for watching!

[@oldone58]

Thank you for this video. I have an Echo blower that I need to do this to as well as a weed trimmer. What are the carb kit numbers??

[@IFIXIT4U]

The kit I used in the video is a "ZAMA RB-188" . But Echo uses many different carbs that take different kits. Thank you

[@lipripr55]

I did not see a link for the more in depth video ? pls link. Thanks

[@IFIXIT4U]

kzbin.info/www/bejne/b5nTnoCvaNOYbq8

[@markrussell1390]

Great

[@IFIXIT4U]

Thank you

[@kevinkelley6237]

What spark tester is that?

[@IFIXIT4U]

Added tester info to notes under video. Thank you.

[@wesley9250]

I just found a PB251 and the only real problem was that it was missing the throttle cable $1.55 at Amazon + shipping.

[@KevinJohnson-v5n]

Frank's hot sauce

[@IFIXIT4U]

Good stuff! Lol.