2GIG/Vivint Smoke Detector Battery Replacement

  Рет қаралды 37,949

sellgooddeals DIY

sellgooddeals DIY

5 жыл бұрын

Replacement of the battery on a 2GIG/Vivint Smoke Detector. To remove the smoke detector turn the detector 1/4 of a turn counter clockwise. The 2GIG/Vivint Panel will beep indicating a tamper has occurred on the smoke detector. The smoke detector uses 3 AAA replacement batteries. One of the batteries was very difficult to remove so keep that in mind. Now just reinstall the 2GIG/Vivint smoke detector back into the mounting base turning it clockwise.

Пікірлер: 41
@anja4906
@anja4906 2 жыл бұрын
Wow.. if we could of had KZbin back in the 70's.. I would be so far ahead..
@billiamc1969
@billiamc1969 Жыл бұрын
Thanks so much. This is the most counter-intuitive piece of equipment I've come across.
@MyronsBaldspotLovesKevSamuels
@MyronsBaldspotLovesKevSamuels 4 жыл бұрын
You saved my life after over four weeks of struggle. I was afraid it would come out the ceiling. This vid gave me confidence to give it a good turn with both hands and was more simple than I like to admit. Thank you.
@Skepe23
@Skepe23 2 жыл бұрын
After trying to wait on hold for 8 minutes. I found your instruction and they were concise and easy to follow. Thanks!!!
@stormaustin5
@stormaustin5 4 жыл бұрын
Thank you so much my grandma was freaking out I had to help her. You are a life saver.
@feralkitty9629
@feralkitty9629 2 жыл бұрын
Thanks so much from me and my anxiety ridden dog. My smoke detector says it's an "Apollo" brand - ADT installed it with my alarm system, but it looks just like this one and has the exact same battery set up. I could not figure out how to get the batteries out, and the beeping was causing my dog to stress out (panting & shaking & trying to destroy his crate or the door jam in my bedroom when I tried to leave him alone). ADT was useless after waiting 20+ minutes to speak to technical support - the first person told me to get a 3v battery (this was before I opened it - the ADT help video also said to get a 3v battery!), and the next person (I called back) told me to get the AAA batteries out "just push down on the end with the spring" (but there's no spring!) & when I tried to explain the plastic clips holding the batteries in place she told me to "just unclip the clips". Finding your video was a very welcome end to a 2 1/2 hour ordeal, starting with accidentally setting off the smoke detector while cooking (which must have killed the batteries?), and the fire department coming to my house even though ADT told me they would cancel the alarm call! I'm so disappointed with ADT right now! At least the beeping has stopped and my dog has a relaxed a bit now!
@acdfus
@acdfus 3 жыл бұрын
Thank you so much my neighbor was freaking out I had to help her. You are a life saver.
@Everyonespal99
@Everyonespal99 3 жыл бұрын
Thank you so much. Very Helpful. Thought I was going to break it to replace batteries. They were very tight as you mentioned. Thank you 🙏
@Buildsolarhomes
@Buildsolarhomes 3 жыл бұрын
Thanks for posting
@yousraqusais9183
@yousraqusais9183 Жыл бұрын
Thank you a lot for your help 🙏🏻
@hampton-roads-bus-guy
@hampton-roads-bus-guy 3 жыл бұрын
can you replace all your existing smoke alarms with these?
@paulaandrea8806
@paulaandrea8806 3 жыл бұрын
How do you stop the chirping????
@CitrusThings
@CitrusThings
Ahhhh I didn't know this would trigger an alarm!
@rizzaadap4475
@rizzaadap4475 3 жыл бұрын
Thank you!!
@dewayneporter6541
@dewayneporter6541 2 жыл бұрын
Thanks for the information
@Ojeramup12
@Ojeramup12 Жыл бұрын
Thanks for the video. Mine need replacement.
@FluffyBunny9002
@FluffyBunny9002 3 жыл бұрын
Mine still chirps and blinks yellow every 8 seconds or so. I cleaned it with an air blower and replaced the batteries with new ones I just bought. Nothing is stopping the chirping.
@JaneTheJungle
@JaneTheJungle 3 жыл бұрын
Thanks for sharing this but sad to say mine is still chirping after charging the battery. I don’t know 🤷‍♀️
@Mearyeaurng
@Mearyeaurng Жыл бұрын
Thanks for showing
@Genesislseries48574
@Genesislseries48574 Жыл бұрын
Mines was at my vivint security system which that wireless smoke detector company name was labeled :apollo: and also every 2gig/apollo wireless smoke alarm is that when it has a fualt or a low battery when theres smoke and fire, it will not activate the alarm since thoose are photoelectric and testing the heat detection and spray smoke and litting something on fire or using a test/hush button wont do anything with that wireless smoke detector and this is why every people need to replace the batteries on a 2gig smoke alarm and apollo wireless smoke detector's so it can function incase of a fire emergency
Smoke Alarm Won't Stop Chirping Even With New Battery
2:56
Andrew DIY
Рет қаралды 229 М.
Mama vs Son vs Daddy 😭🤣
00:13
DADDYSON SHOW
Рет қаралды 40 МЛН
Why Is He Unhappy…?
00:26
Alan Chikin Chow
Рет қаралды 17 МЛН
Testing the 2GIG SMKT3-345 Smoke and Heat Detector
6:22
Alarm Grid
Рет қаралды 8 М.
Battery Tutorial:  Glass Break (GB2)
0:48
Vivint
Рет қаралды 103 М.
How To Install A Smoke Detector
8:05
HouseImprovements
Рет қаралды 36 М.
Can You  Unplug A Hardwired Smoke Detector
3:04
Conquerall Electrical
Рет қаралды 426 М.
2GIG SMKT3-345: Go!Control Programming
18:58
Alarm Grid
Рет қаралды 31 М.
Battery Tutorial: Carbon Monoxide Detector
0:27
Vivint
Рет қаралды 21 М.
replace smoke detector battery - first alert wired smoke alarm
0:21
Vivint is the All-In-One Smart Home Security System
12:54
Tech With Brett
Рет қаралды 8 М.
Mama vs Son vs Daddy 😭🤣
00:13
DADDYSON SHOW
Рет қаралды 40 МЛН