Spraymax 2K Clearcoat Q & A

[@youcanthide004]

Super comprehensive video with a lot of info, Thanks!!

[@vintagebikes4215]

Used this product first time yesterday, I only have to knock it down and polish. Great so far. Easy to apply. Helpful video...thanks. I can say it went over various surfaces on a motorcycle gas tank...old clearcoat, new clearcoat, sanded freshly painted paint, very old paint (all lightly sanded with 2500 grit) ...sticks to all.

[@LoozerKidd]

You guys answered all of the questions I had. Thanks for making this video.

[@Ty-tie_FTW]

Not sure why people think they can just wipe down some old paint and then run a layer of spraymax 2k and then complain it peeled online. I love this stuff and this little q&a video is perfect. If you follow this guys instruction, i seriously doubt your paint is gonna peel in 3 years, let alone 1 year

[@jimmytheshark86]

I will be applying spray max 2 k clear coat over acrylic enamel paint, grimspeed gold on my wheels. How long should I wait before applying the clear coat? Thanks!

[@kingrubio3976]

Answered all the questions thanks

[@rcram1]

Great video guys. How long should i wait for recoating after wet sanding? Want to spray 3 coats over base, then wetland any impurities and spray 2 more coats with a fresh can. This will be done on a motorcycle tank and fenders. Thanks!

[@repaintsupply]

Thank you so much for watching! I would recommend waiting at least sixteen hours based on 70 degree temperature, after the last coat of clearcoat is applied.

[@Ty-tie_FTW]

Wow, im glad you asked this. I had a similar question but didn't want to risk scuffing it and potentially ruining all my hard work

[@davidhartzell8428]

So I heated up my little shop because it's around 35-45 degrees outside so clearcoat a2K clear laid down beautiful. How long should I wait to cut and buff.

[@mikefinnegan7469]

I color matched a bumper to my truck and used this stuff for the clear. Is it going to make much of a difference if I only wait 19-20 hours before I wet sand it rather than 24hrs? When I sprayed the clear it was about 65-70 degrees in my garage with low humidity

[@repaintsupply]

Good Morning, wet sanding at the 19-20 hour mark should not make a difference. We appreciate your time!

[@mikefinnegan7469]

@@repaintsupply Thank you for the quick response, and thanks for the straight forward video answering questions.

[@monks883goldandsilverleaf]

The procedure for spraying the 2k clear, would you use the same procedure for spraying the 2k DTM white?

[@danielpagan1781]

Hey guys, I know you said that you can use this over water based paint too. I just want to ask specifically to be certain. I just painted some artwork on a guitar body using studio acrylic paint. Would spraymax 2k be good as a clear coat?

[@repaintsupply7627]

It will be ok for AUTOMOTIVE water base paint but not for sure on this type of paint. I would check it on a small sample before praying the entire area. Hope this helps. Thank you for the question.

[@luishuerta1625]

Can it be applied over bare metal?

[@SteveWittek]

I've looked at all the info , reviews , and tech sheets for this 2K clearcoat but nobody addressed the recoating of this clearcoat. Is there a recoat window? Can it be sanded to level the finish over striping or layered base colors and then recleared with minimum of 2 additional coats allowing for denibbing and polishing.

[@repaintsupply]

Good Morning! It can absolutely be sanded, provided you have applied enough clearcoat to sand. But I would recommend a minimum of two full wet coats, and then allow about 12 hours, or even overnight dry time, and then we suggest sanding with 1000g to level out any imperfections. Once completed you can re-clear with 2-3 coats of clear based on 70 degree temperature. If you have any further questions please don't hesitate to call, or even reply! We're happy to help!

[@Moussagema]

Hello, I have a white 2016 ford taurus. I wanted to paint the roof black. I would also like to paint some parts of the car in pearl white. What would you advise me to do?

[@repaintsupply]

Thank you for watching, a process like this can involve different steps. If you could reach out to one of our technicians at 1-888-709-8131, they would be more than happy to help walk you through the process. Thank you again!

[@katoom-ju6vo]

Hello, I'm finishing a white guitar and I do not want to use a traditional Nitrocellulose Lacquer clear coat because it will yellow over time. Will the Spraymax 2K clear coat yellow over time? Thanks

[@modernvehiclecare]

Excellent spot on advice

[@laddcampbell2833]

What respiratory filters do I need to use on my mask for this?

[@sixpicker82]

Even 3M says no respirator with isocyanates. “Isocynates seek moisture and can be ingested through skin, hair, and eyeballs.” You are supposed to wear a supplied air hood in a booth. I am thinking full face mask with p100 cartridges, tyvek suit and nitrile gloves outdoors down wind. Before bug season!!

[@matthewstorm5188]

P100 is just a dust filter, and will do NOTHING to filter isocyanates. Although respirators are not recommended for isocyanates, if you are going to use a respirator, you need to use something that can remove organic vapors, such as the 60920 series filters.

[@kimberlyterranova2842]

I’m going to use this to repaint a patch on the hood of my car that is rusted. I’m well aware it won’t perfectly match. It’s a small spot, so the clear coat will definitely get on the surrounding area, which still has the factory paint and clear coat. Will this product in any way damage the factory clear coat or cause it to bubble?

[@monks883goldandsilverleaf]

Hi, I have a flat project with gold and silver leaf applied to it. I am going to use spray max 2k glamor clear. I want to put 4 coats down, wet sand smooth, and apply 3 more coats of clear to try to get a nice deep shine. Question after the four coats should I let it cure longer before I wet sand? After the other three coats are applied should I wait longer for the three coats to cure ? Then I would wet sand and polish. Thank you or should 24 hrs. Be ok on each step? Project is 10” X 20” after this I will be doing another project but 12” X 24”.

[@repaintsupply]

With the glamour coat it should only take 2-3 coats to get the look you are wanting. Make sure the clear coat is tacky to the touch before applying the next coat.

[@troyhelton4101]

Can I use this over Krylon jungle green paint? It is a urethane paint. I’m painting my motorcycle and want the best clear for that.

[@repaintsupply]

Yes you can.

[@miragesmack007]

Have used before, like the product. Planning a golf cart repaint that is five hours away for me, while they are on their honeymoon, don’t want to bring air equipment. I seem to recall being able to get a base coat from Spraymax, but those seem hard to find these days. Looking at a royal blue type color. Are base coats an option? At this point, I’m leaning toward Fusion paint, since it’s straight up plastic, or should I go the primer route? Trying to sort out all the details so I’m ready to go in a few months. Thanks for the vid.

[@repaintsupply]

Good Morning! We could build you any color of basecoat. I definitely recommend using a plastic adhesion promoter before applying your basecoat, specifically Spray Max 3680009. If you have any other questions please don't hesitate to call, our technicians would be more than willing to help you as well. (870)-425-8131, thank you!

[@hotrodvette]

Got basecoat on my T tops today two colors today gonna clear coat tomorrow with this product wish me luck.

[@bakerqahwaji983]

Hi can be stored in frezer for long storg like a month ??? Thanks

[@89Jeeper]

Can you use this clear coat over a oil based paint, like tremclad rust paint ?

[@repaintsupply]

If the Tremclad Rust Paint is fully cured, and scuff sanded with a 800 Grit, Scotch Brite Pad, or Grey Scuff Pad you should be able too. Thank you!

[@89Jeeper]

@@repaintsupply very good I’ll give it a shot :)

[@TheLithGH]

One more question..... do you know if the Spraymax 2k will ruin/damage vinyl decals by any chance? Can't find answers via google searches... thanks!

[@jedUDX183]

I've sprayed it over decals with no problem

[@mikebuckets]

If the previous 1k clear is peeling in a few spots on my hood,could I wet sand around the edge of the peel, and apply the 2k afterwards? The paint is still good in those spots because the peeling just started.

[@repaintsupply]

Yes you can

[@chickenporkadob0]

question. if you didn't pop the catalyst in the 2k does that mean it acts like 1k if you spray it?

[@keithroberts5611]

Question for you i restored my headlights a few year's ago and used 2kmax as a clearcoat (ford fiesta 2019) They need restoration again, Having a close look i noticed mutable cracks all over the lens? Anyway i took my car to a headlight expert who informed me i had spider cracking right through the polycarbonate lenses and would fail my next vehicle inspection test!! The only solution would be to buy a new set!! £600 POUNDS!!🤔😭😱

[@glennhoagland6822]

Headlight expert 😂

[@999Joseph]

Your prep work was not done correctly, Those cracks your referring to was probably clear coat that did not bind well with the plastic Happens when surface isn’t properly prepped Happened to me

[@keithroberts5611]

​@@999JosephI think the prep was done to well? As it's been proven that 2k over bonds to polycarbonate not allowing the surface to expand and contract with changing temperatures Winter Summer ect🤔

[@kenmastersmaster]

Can i buy it in bulk for a better price? Can it stick well to a scuffed up 1200 sand scratch?

[@ilkzode1822]

Good afternoon gents, So much mixed info on painting plastics. Just painted my kids dirt bike frame and plastic covers with diff shades of rustoleum 2x spray. Its cured over a week. Is the spraymax 2k good for the both frame and plastic. Is your 2k not a good option because of the flex in plastic

[@repaintsupply]

If it is a lacquer base it is compatible but keep in mind that it is only as flexible as what it is covering. If it is an OIL BASE then do not use this product on it.

[@maze400]

Can I use this for a kayak?

[@romanticman2548]

Good job guys, Can i use it on a sink or tub, And how long it will last ?

[@seeya205]

It would be too slippery for a tub.

[@derekshane8786]

How soon do i need to apply spraymax 2k after my last rattle can coat of acrylic (rustoleum 2x)? Do i need to wetsand or sand my rattle can coat before the 2k if i wait a week ?

[@seeya205]

You want to apply it within 1-24 hours after your last basecoat or you will have to sand before applying.

[@joew6177]

UV resistant?

[@JoeAndMattsDetailing0]

Are used it on my side mirrors. I love it. My project came out beautiful.👍🏼👍🏼👍🏼🔥

[@repaintsupply]

I’m glad you liked the product, so glad it worked for your project!

[@Oakleyshooter]

What is considered a fresh base coat? I painted an outboard cowling two days ago and plan to use this to clear it tomorrow. Will that be fine without any further prep?

[@repaintsupply]

I cannot answer that for sure because it has been 2 days, which will prob have dust or other containments on the paint. Be sure and clean the paint surface with a tack cloth and this should remove any dirt or dust.

[@Oakleyshooter]

@@repaintsupply I wiped the paint clean and sprayed the clear. The clear coat worked very well, however I wish I applied it just a smidge more heavier on my last two coats. Would use again!

[@repaintsupply]

@@Oakleyshooter AWESOME!

[@kimjimenez5572]

Hi again. Today the guy came to clear coat my car . So far used 9 cans of the 2k spray max after he was done I noticed he did not press the red cap on any of the cans, what will happen now? This is stressful, am I goin to have to rebuy all cans and redo

[@repaintsupply]

If the cans were never activated by inserting the red caps on the bottom of the can and pressing to make sure the hardener was activated, then the clear coat will NEVER setup. All clear that has been sprayed will have to be removed and then re-cleared. This may also damage the paint that was applied also.

[@kimjimenez5572]

@@repaintsupply ok thank you for that info so basically the whole paint job needs to be redone ,sanding, base coat and clear coat right?

[@repaintsupply]

@@kimjimenez5572 Possibly. I cannot say for sure because I have not seen the paint job but from what you are saying, it would be a great idea.

[@Scottmd714]

What is the maximum temperature this can be applied at?

[@carlossarti9833]

Nice video Where I can order if I want to get a lot

[@kimjimenez5572]

Nice video! 👍 I have a question. Can I use this 2k spray can to paint my whole entire car at one time? Instead of taking the panels or or doing peice by peice?

[@toddlehman928]

Even though this stuff sprays excellent it is still an aerosol can, it sprays wide but not quite wide enough in my opinion for the larger areas on your car.

[@GregGarbig]

Can I spray addition coats 24 hours after the first 2 coats ?

[@mattbandfield]

How about as a wood finish?

[@repaintsupply]

Good Morning! As long as you are prepping properly, this product can be used as a wood finish.

[@marvinmartin4692]

Can you use it to coat polished aluminum wheels?

[@repaintsupply]

Unfortunately the Spray Max 2K Clearcoat would not work, however I would recommend the KBS 8114, Gloss Clear Diamond Finish!

[@firstlast-yn4qg]

glosses compare?

[@anthonyrios8168]

How many cans of this stuff do I need per rim/wheel??

[@glennhoagland6822]

1 per wheel. Thanks for watching porn.

[@marshallsilva9389]

How toxic is it? Will 2cans do a van roof?

[@ColinGiles-f5e]

These products as you say are professional grade, you failed to mention that the activator is isocyanate a particularly nasty chemical. These products are only to be used in a spray booth with full body and eye protection worn and an air fed mask. It is wrong to imply that the non professional DIYer is safe to use these products in a home/garage environment. In some countries like the UK it is actually illegal to use these outside of a professional spray booth, although enforcement of that rule is another story.

[@warrenwarburtonesq.6884]

I agree, isocyanate will kill you. Particle masks will not protect you.

[@cgeorge6786]

How bad does it mess you up? C word?

[@kangpasta]

​@@cgeorge6786it can kill you. literally.

[@jeffjames6240]

I used over my base coat 5 months ago. After a week I wet sanded then polished. It looked beautiful..for a month. Then started losing it's shine. I repolished it and beautiful again. A month later, lost it's shine again. I just repolished..looks beautiful again...why isn't it keeping it's shine

[@repaintsupply]

There could be a few reasons for this occurrence. Please give us a call at 1-888-709-8131 and talk with one of our knowledgeable techs so we can make sure this issue is solved. Thank you

[@TheLithGH]

Great video, thank you! If you get Orange Peel on 1st coat, do we continue on with 2nd coat, then wet sand 24 hours later, OR do we stop after 1st coat, wait 24 hours, wet sand, then apply 2nd coat (wet sand, etc)

[@repaintsupply]

Thank you! Glad, it was helpful. Continue on with your coats of clear and wet sand once it is dry.

[@nightingale_gg]

Great video, thanks yall

[@repaintsupply]

@@nightingale_gg thank you!

[@Get0ut]

can it be applied directly to carbon fiber?

[@giantstickman8650]

From experience, no, the 2k clear I used (Upol brand) had an odd reaction. Instead I used a plastic primer / adhesion promoter (upol 2003/al) first and then sprayed the 2k. Worked a charm.

[@Kevinmorales289]

I sprayed it with a carbon fiber wing and it looks nice and nothing wrong happened

[@JusSayin-123]

Used it over a carbon fiber project. No problem.

[@croomcas]

Good info 👍🏼👍🏽

[@monicababy1056]

Where can I get safety mask at bro

[@keithroberts5611]

Amazon bro!!

[@kangpasta]

or a local paint store. some hardware stores

[@LorryAile]

Hello,sir. We are manufacturers of aerosol spray paint cans. Our company can automatically filling ,sealing and inflating the aerosol cans. Do you have interests to grt to know our machines?😀

[@AdelaandJude]

as of August 2024 - Spray Max 2K clear has been shipping defective product -(the vendor told me this) I purchased some on Amazon from a distributor and 3 out of 6 cans produce "sputter" - terrible - I went back to my compressor and mixed my own and sprayed thru a gun. Never use spray max EVER AGAIN. Ruined my paint and I had to sand and recoat.

[@Bobby5Nester]

I activated my can of 2K spray max a week ago and it is still spraying. It has not locked up yet. Is this normal?

[@repaintsupply]

Make sure you have shaken it well. It will not mix without shaking it.

[@v1-vr-rotatev2-vy_vx31]

Been painting cars 40 years,, have used this 2K clear, no matter how well you let it mix and let it sit before use,,, it will peel in one year,, there are 55 gallon drums of low quality clear sitting around, that vendors are trying to get rid of, and make money, at the expense of us all,, the best clears are automotive clears, purchased at automotive paint suppliers, don't buy the cheap clear,, buy the best most expensive available...

[@toddlehman928]

Hasn't peeled on my motorcycle after 3 years. Play down so smooth I didn't even have to wet sand/buff. Love it

[@alphaomega750]

Bs. Never peeled on any of my projects. You probably prepped it wrong.

[@mybluebelly]

You guys failed to explain exactly WHY the product expires after "3 years" Such poor form...amateurs :(

[@repaintsupply]

Unfortunately we are not the manufacturers of this product. We do not have an explanation for the reasoning behind the expiration. It varies based on the chemical components. If you're looking for an explanation contact SprayMax directly. They'll be able to provide a breakdown of that info. Thanks for watching!

[@mybluebelly]

@@repaintsupply No worries, it just bugs me that it states "3 years" without any further explanation. And i do mean BUG. I have used Spraymax products in the past and it is a rock solid product ;-)

[@gt-c-]

HEY...SCHMUCK...be polite...and show RESPECT even if you have a BLUEBELLY!

[@mybluebelly]

@@gt-c- So sorry but my mannens are what they are. Now take a hike eh.

[@chrisrauch]

Everything that’s any good expires after 3yrs if left on the shelf.

[@ashleydruce9777]

How Hard is the finished product.eg wheels on a bike or car.will it chip easy ??.

[@repaintsupply]

It is a quality finish but keep in mind it will chip if used on wheels of any kind.

[@wdhewson]

Is this product OK to spry over vinyl decals and pinstriping ??

[@repaintsupply]

I would not recommend, it may wrinkle over the vinyl and pinstriping. You might want to do a test spray and see if it will.

[@wdhewson]

@@repaintsupply Thanks