3.6L pentastar spark plug valve cover gasket replacement

I am in the process of replacing the 4 overhead cams, rocker arms and lifters in a 2013 Chrysler Town and Country 3.6L Pentastar engine and I recommend to watch these 2 videos
• Chrysler/VW 3.2 and 3....
• 2014 Chrysler Town & C...
There is a special tool you can buy to remove these spark plug gaskets but I didn't have time to wait.
Hammer aka air ratchet, 21MM socket and 1-1/8" socket worked for me.
It is a PCV valve (auto), not PVC valve (plumbing) ... I get the letters mixed up all the time.

[@friedaarellano4084]

Life saver !!! Straight and to the point and good instructions and close up. Thank you so much

[@juancjesuslovesyou]

Thank you

[@mikeymike1843]

This is the easy part. Getting the wiring loom and hoses out of the way, to take the cover off is the hard part. If I ever have to do it again I'll post it on youtube, as I haven't seen this.

[@juancjesuslovesyou]

This is a good video kzbin.info/www/bejne/r2W3fI2LrNCtj5o

[@juancjesuslovesyou]

Note - I did replace all 4 cams, eBay made in china but USA shipper and they looked just like the OEM. 284,000 miles and running strong. I used Elgin rocker arms and lifters, they come in a kit.

[@juancjesuslovesyou]

Thanks for watching #JesusLovesYou and it is a PCV Valve - positive crankcase ventilation not PVC Lol!

[@ronsereda4242]

Thank you for taking the time to make this video. I thought these would be a simple O ring. Do these seals have to be replaced every time the valve cover comes off? Thanks again.

[@juancjesuslovesyou]

I imagine there is a suggested maintenance mileage for replacing these although I don't know what that would be. This engine at the time had 225,000 so I just replaced all gaskets at the time I did this.

[@conniedeniseboswell2948]

I have a plug stuck it's not tighten up or coming out my guess is stripped and there is oil around it.

[@juancjesuslovesyou]

Hopefully it isn't the threads on the hesd

[@conniedeniseboswell2948]

@@juancjesuslovesyou I'm worried about it and I seen oil inside there not very much but enough.

[@ceelo3324]

Jesus loves you too brother!

[@juancjesuslovesyou]

Yes he does

[@juancjesuslovesyou]

I have to say I do like this 3.6 Pentastar engine. Easy to work on and I have over 282,000 miles runs like a champ with no oil usage. JesusLovesYou

[@Eaos23]

Great informative video! Did you struggle to take out the valve cover at all?

[@juancjesuslovesyou]

Sorry for delay response, I didn't get a notification on your question. From what I remember the valve cover closest to the front was a little challenging but take your time. I believe I tap around it with a rubber mallet until it was loose.

[@deathmortiz13]

What would cause to have to have to have this replaced?

[@juancjesuslovesyou]

Bad rockers arms so as I replaced those and replaces all lifters, cams.... I just went through to replace gaskets, oil cooler, plugs, coils since I was already in that far. Fun project

[@bricksquad601]

By chance do you remember the spark plug gasket part number?

[@juancjesuslovesyou]

I searched my purchases in different online outlets but I couldn't find where I got the set. These would come with the valve gasket set with all gaskets for the valve cover. Amazon, eBay, Advance Auto, I look for the best deal and product rating. Sorry I couldn't be more specific.

[@juancjesuslovesyou]

Just found them! Fel-Pro Walmart but Amazon has the same right now for same price also - www.walmart.com/ip/Fel-Pro-Oe-VS50805R-FEPVS50805R-VALVE-CVR-GSKT-SET/723781120

[@bricksquad601]

Thank you very much! Keep up the great content