3 Different Ways To Cut Any Object | Cut & Fill Surface | Simple Methods For Blender (All Versions)

In this tutorial, we will discuss about 3 different methods to cut an object in Blender. They are super-easy, and each method is suitable for a specific scenario based on the requirement. We will also learn how to easily add a new face after cutting some part from a mesh. Please watch the video for the complete tutorial. If you have any question on this tutorial, please leave your comment below.
𝐇𝐨𝐰 𝐭𝐨 𝐜𝐮𝐭 𝐚𝐧 𝐨𝐛𝐣𝐞𝐜𝐭 𝐢𝐧𝐭𝐨 𝐞𝐪𝐮𝐚𝐥 𝐩𝐢𝐞𝐜𝐞𝐬 👉 • Divide Any Object Into...
𝐅𝐨𝐥𝐥𝐨𝐰 𝐮𝐬 𝐨𝐧 𝐈𝐧𝐬𝐭𝐚𝐠𝐫𝐚𝐦 👉 / 5minutesblender
𝐓𝐡𝐚𝐧𝐤𝐬 𝐟𝐨𝐫 𝐲𝐨𝐮𝐫 𝐝𝐨𝐧𝐚𝐭𝐢𝐨𝐧𝐬 👉 donorbox.org/5-minutes-blender
==================================================
We have many more tutorials that can help you learn Blender like a professional. You can go through the following playlists for the relevant topics:
👇 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 𝐅𝐨𝐮𝐧𝐝𝐚𝐭𝐢𝐨𝐧 𝐂𝐨𝐮𝐫𝐬𝐞 𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬:
If you are absolutely new to Blender, take this foundation course.
• Blender Foundation Course
👇 𝐀𝐥𝐥 𝟏𝟐 𝐂𝐥𝐚𝐬𝐬𝐞𝐬 𝐓𝐨𝐠𝐞𝐭𝐡𝐞𝐫 𝐈𝐧 𝐎𝐧𝐞 𝐇𝐨𝐮𝐫:
• Blender Foundation Cou...
👇 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 𝐓𝐢𝐩𝐬 𝐀𝐧𝐝 𝐓𝐫𝐢𝐜𝐤𝐬 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Blender Tips & Tricks
👇 𝐄𝐚𝐬𝐲 𝐌𝐨𝐝𝐞𝐥𝐬 𝐅𝐨𝐫 𝐁𝐞𝐠𝐢𝐧𝐧𝐞𝐫𝐬 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Easy Models For Beginners
👇 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬 𝐘𝐨𝐮 𝐍𝐞𝐞𝐝 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Materials You Need In ...
👇 𝐀𝐥𝐥 𝐓𝐞𝐱𝐭 𝐄𝐟𝐟𝐞𝐜𝐭𝐬 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Text Effects In Blender
👇 𝐂𝐚𝐦𝐞𝐫𝐚 𝐌𝐨𝐯𝐞𝐦𝐞𝐧𝐭 & 𝐒𝐞𝐭𝐭𝐢𝐧𝐠𝐬 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫:
• Camera Movement & Sett...
👇 𝐔𝐬𝐞𝐟𝐮𝐥 𝐋𝐢𝐠𝐡𝐭𝐢𝐧𝐠 𝐒𝐞𝐭𝐮𝐩 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Useful Lighting Setup ...
👇 𝐑𝐢𝐠𝐢𝐝 𝐁𝐨𝐝𝐲 𝐏𝐡𝐲𝐬𝐢𝐜𝐬 & 𝐑𝐢𝐠𝐢𝐝 𝐁𝐨𝐝𝐲 𝐂𝐨𝐧𝐬𝐭𝐫𝐚𝐢𝐧𝐭𝐬:
• Rigid Body Physics in ...
👇 𝐅𝐢𝐫𝐞 & 𝐒𝐦𝐨𝐤𝐞 𝐒𝐢𝐦𝐮𝐥𝐚𝐭𝐢𝐨𝐧 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Fire & Smoke Simulatio...
👇 𝐅𝐥𝐮𝐢𝐝 𝐒𝐢𝐦𝐮𝐥𝐚𝐭𝐢𝐨𝐧 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Fluid Simulation in Bl...
👇 𝐌𝐚𝐬𝐭𝐞𝐫𝐢𝐧𝐠 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Mastering Blender
If you want to watch our own creations in Blender, you can also check out the following channel where we regularly upload videos on Animation, Space Exploration and AI.
𝐎𝐮𝐫 𝐨𝐭𝐡𝐞𝐫 𝐜𝐡𝐚𝐧𝐧𝐞𝐥 𝐥𝐢𝐧𝐤: / @thealienworld
#Blender #Animation #Modeling
Timestamp
00:00 First method using the Boolean modifier
01:06 Second method using the Loop Cut tool
02:49 Third method using the Knife tool

[@5MinutesBlender]

𝐇𝐨𝐰 𝐭𝐨 𝐜𝐮𝐭 𝐚𝐧𝐲 𝐨𝐛𝐣𝐞𝐜𝐭 𝐢𝐧𝐭𝐨 𝐬𝐞𝐯𝐞𝐫𝐚𝐥 𝐞𝐪𝐮𝐚𝐥 𝐩𝐢𝐞𝐜𝐞𝐬 👉 kzbin.info/www/bejne/m3Obi6qZiM2brrc

[@getmyuted]

Bro you just opened a whole new level for me

[@writerinrwanda]

Thank you so much. Really easy to follow, and loved that you explained how to make a new face along with cutting.

[@5MinutesBlender]

Glad to know that it was helpful! 😊

[@bennb_Azamtrill]

THANK YOU, I BEEN STRUGGLING ON BLENDER FOR A LONG TIME!

[@5MinutesBlender]

Glad I could help! Cheers! 😊💝💝

[@bennb_Azamtrill]

@@5MinutesBlender You really are a life saver :D

[@dougeldridge1219]

Ugh, thank you. I have looked for weeks, using several programs to simply cut geometric shapes from my 3d models. This is the simplest, most succinct.

[@5MinutesBlender]

We're very glad to know that it helped you 😊

[@ralexnicholas]

Method 2 is just what I was looking for!

[@gameidunreal706]

short, simple and the demonstration is the bare basic. Excellent! Helped me a lot!

[@5MinutesBlender]

Thank you so much! Great to hear that 💝💝💝

[@synical4]

Thank you so much! I never knew about the boolean modifier!

[@sirbootylord6880]

Straight forward, no convoluted steps. I like it

[@5MinutesBlender]

Thank you bro 💝

[@YeetDisDude]

Thank you so much method 1 is really simple and i see most people use the bisect

[@papertable]

probaly 1 of the best tutorials i've ever seen, im new to blender and this really helped, thx!

[@5MinutesBlender]

Glad to know that you found it useful!

[@LoopCraftYT]

Thanks for the quick but informative tutorial, I wanted to cut a cylinder object in half but didn't know how but after watching this video I now know. Thanks!

[@5MinutesBlender]

Really glad to know that it helped you 🙂

[@AlfredoAntonioMartinez]

Excellent, direct to the point, amazing tutorials!!!

[@5MinutesBlender]

Thank you 💝 Glad you liked them!

[@kevinlobo2695]

One of the clearest tutorials. Thanks!!!

[@5MinutesBlender]

Glad it was helpful! Cheers! 😊

[@official6686]

Method 1 works perfect thank you so muck

[@bakker96]

Jesus christ this should win a fucking grammy & become the new standard. How you SHOWN the steps AGAIN to make it clear about the new faces.. fucking bravo. Normally you have to rewind and fuck it all up. Thanks man.

[@5MinutesBlender]

Thank you bro, for this nice appreciation! It means a lot 💝💝

[@jesperaxelsson7069]

Great video! Thanks!

[@tomashruska2171]

thanks. It tooks me 10 minutes to realize, if the object, you want to cut off, is smaller than the original, you wont see the difference, because it is hidden inside :D

[@5MinutesBlender]

Ha ha 😂 True !!

[@EPSILONGLASS]

Muy bueno!!! estoy aprendiendo y tus tutoriales son excelentes, gracias!! Te ganaste un suscriptor nuevo!!

[@5MinutesBlender]

Me alegra saber que nuestros tutoriales te ayudaron a aprender algo. Muchas gracias 💝

[@ginho3848]

Just what I need. Thank you.

[@5MinutesBlender]

Glad to know that it was helpful for you!

[@ruchisingh2527]

Thank you thank you thank you! This was so helpful!

[@5MinutesBlender]

Glad to know that you found it helpful!

[@otapi]

Thanx, it was fast and clean, and not using any paid add-ons (like many other videos on to cut a piece from a box)

[@5MinutesBlender]

Glad it helped 😊 Cheers!

[@wutangclams9936]

This helped me so much, thank you!

[@5MinutesBlender]

I'm glad to know that it helped you!

[@bipedalnarwhal277]

Super simple and useful, thank you!!

[@5MinutesBlender]

I'm really glad that it helped! 😊💝💝

[@Al-Hussainy]

Thank you i needed that first one so bad❤️

[@5MinutesBlender]

Glad we could help 😊

[@snowpenguin6412]

Thankyou so much for this amazing video!

[@5MinutesBlender]

I'm very glad to know that you liked it! Cheers!!

[@northernlightz_]

Underrated, thank you so much!

[@5MinutesBlender]

Thank you too! 💖💖

[@Kacuits]

tysm the 3rd method helped alot

[@5MinutesBlender]

Glad to know that it helped 😊

[@creativereflux4336]

Thanks again!

[@mithx_creator]

Hi all your tutorials and tips are amazing...It would be great if you could do a tutorial about the best blender settings for sculpting

[@5MinutesBlender]

Thanks! Yes, we will create a tutorial on sculpting.

[@TomGeewhiskeytango15511meterDX]

Very cool tried it myself and worked :)

[@oblogames]

ty man the Boolean modifier helped alot

[@5MinutesBlender]

Glad to know that! Cheers bro!

[@meefvongrau9814]

Thank you for your decision to help

[@mahmudafiya6705]

really helped thanks alot! 😁

[@5MinutesBlender]

Glad it helped you!

[@LightningTrooper]

and no word about UV, great

[@5MinutesBlender]

Wanted to keep it simple, before UV. But you have a valid point and if we re-do this tutorial ever we will keep this in mind 👉

[@Kannemilsch]

This is a hell of a tutorial, thanks so much

[@5MinutesBlender]

Glad to know that it helped! 😊💖💖

[@redoyhossain2729]

Thanks a lot 😁

[@bry4n_h]

awesome video. very compact and helpful.

[@5MinutesBlender]

Thank you so much 💝

[@Kidfromtheroad]

finnaly something worth my tome

[@5MinutesBlender]

Glad you liked it! 😊💝💝

[@user-mo4kw6wq2z]

The best blender tutorials ever

[@5MinutesBlender]

Thank you so much 💝💝

[@ramens]

Thank you!

[@iulian_98]

Thank you. I knew I could do this but I forgot how. I remembered the method with the "Bevel" modifier. Thanks .

[@5MinutesBlender]

Glad it helped 😊

[@blafiethecoyote7823]

Thank you! I'm trying to make a fursuit head 3d model so this helps a LOT!!!

[@5MinutesBlender]

Glad I could help! 😊

[@aruharu]

Thank you!!!

[@briancorrell]

No one: Voice from How It's Made: teaches me how to blender

[@jl9678]

This is so helpful. Thanks

[@5MinutesBlender]

Glad to know that it helped!

[@Komb-Titus]

You are a hero! Thank you!

[@5MinutesBlender]

Thank you too 😊

[@bennb_Azamtrill]

You are the best

[@davitberishvili8062]

Thank you for this video. Was clearly explained this methods.

[@5MinutesBlender]

Glad to know that you found is useful! 😊💝💝

[@jeffreypostma6832]

This is very useful! Thanks a lot

[@5MinutesBlender]

Glad it helped! 😊

[@KahaniRamBhaktKi]

Thank you

[@that1pieperson80]

GOOD CLEAN AND EASY THANK YOU

[@5MinutesBlender]

Glad you liked this tutorial 😊

[@chukwudiebite7775]

Wow, this is a great video. Keep the great job up.

[@5MinutesBlender]

Very glad to know that you found this tutorial useful 💝

[@jjoknyangie]

it helped so much thank you!!

[@5MinutesBlender]

I'm so glad to hear that! 💝💝

[@nuclearexpertwb]

Thank you, this helps

[@5MinutesBlender]

Glad to know it was helpful!

[@bayashigaming7447]

Thank you sir for saving my time to search & scrolling on the youtube❤❤

[@5MinutesBlender]

Great! I'm glad that it helped 😊

[@devcamis8679]

you saved my job, thank you !!

[@5MinutesBlender]

Cheers! I'm glad it helped 😊

[@KotChorny]

thanks man, 1st option is the best and fastest. sometimes after boolean modifier the model with lots of polygons might look edgy, edge split modifier fixes that. So I often use it in pair.

[@5MinutesBlender]

Good tip! Thank you!

[@Ravenousxrellik]

Thanks!

[@amogusus7695]

Thanks

[@vikasrao4927]

thanx 👍

[@edwinclune8206]

thankk you u were very sraight to the point and this helped alot

[@5MinutesBlender]

Glad you found it useful 😊

[@dinodung974]

thank you so much this helped with alot 👏👏

[@5MinutesBlender]

I'm glad to know that it helped you 😊💝💝

[@RiverHeights]

Thanks bro. Helped a lot

[@5MinutesBlender]

I'm glad it helped 😊😊

[@nileshparmar08]

I am from India and your English accent is good to understand for anyone who have quite knowledge of English thanks 👍👍

[@im_china_worker]

it's not a real human's voice it's ai

[@albanderyalshamerii6538]

I just found your channel it is really treasure for beginners like me, Thank you very much! 1:53 in this clip, did you know that when you press Alt+Z it will automatically turn on the wireframe which allows you to select the surface from both sides. whether you are in solid or wireframe moad.

[@5MinutesBlender]

Thank you so much for the appreciations! Yes, Alt+Z turns on the X-ray mode (you can also enable this from the toolbar just left to where we have wireframe view / solid view mode). It can be very useful, or very dangerous depending upon your model. We may end up selecting parts of an object that we do not intend to select. So I avoided showing the use of x-ray, because someone who is new to Blender may get a wrong result and may not even know why that happened. Of course X-ray selection can be very handy most of the time. Thanks for sharing this!

[@bambooplushproductions6339]

thank you :)

[@familiemai4506]

Thanks for your tutorial. Yesterday i was making some gear and only knew the boolean cut out. That took way to long xD. The tutorial was good explained :D thanks

[@5MinutesBlender]

Glad it helped! Cheers! 😊

[@Gamerpumpking]

THANKS

[@margorosful]

Thank youuuuuu!!!

[@5MinutesBlender]

I'm glad it helped you! 😊

[@beautystaff7629]

This tutorial was the best

[@5MinutesBlender]

Thank you so much for the appreciation 😊💝💝

[@creativereflux4336]

Nice video for a newbie like me. Thanks!

[@5MinutesBlender]

Glad you enjoyed it!

[@leyontj]

thanks alot, it worked

[@5MinutesBlender]

Glad it helped you! 😊

[@ixtirochiavlodlar]

thank you so much

[@hobbypsychologist6444]

Thanks, very usefull

[@5MinutesBlender]

Thank you buddy!

[@windy4]

thanks

[@garystanullwich5574]

Thanks for EXPLAINING how to do this. Rather than giving instructions in 10 seconds.

[@5MinutesBlender]

Glad it helped 😊 And thank you so much for the appreciation 💝💝

[@wesleytillman9774]

Thanks.

[@dogdog2951]

This really helped me

[@5MinutesBlender]

Glad it was helpful! 😊

[@jpan.sixty7]

it's my first week of learning blender. Your channel really help me out. Thank you so much. I've subscribed

[@5MinutesBlender]

Great to hear that! Wish you all the best for your Blender learning 👍 And thanks for the sub!

[@jpan.sixty7]

@@5MinutesBlender and you know what? I'm doing a project which helps me graduate from college. I almost done with the 3D object. Wish I could write your channel on my paper

[@jpan.sixty7]

@@5MinutesBlender many of your videos I've watched. Love the way you explain. I got the point and improved it. Btw, I already have design skill on illustrator, this also helped me to understand and apply

[@5MinutesBlender]

@@jpan.sixty7 Love that 💝💝 Thanks a lot for your appreciation, it made my day 😊

[@jasonranaweera3630]

You're a god! love ya.

[@5MinutesBlender]

Thanks a lot for your appreciation bro 💝💝 I am also just a learner, learning new things everyday, we die when we stop learning 😊

[@couquetts8526]

omg tnaks so much

[@beautystaff7629]

I did it thank you so so so much again

[@5MinutesBlender]

That sounds great! Cheers!! 😊

[@yearight1205]

thank you for this!

[@5MinutesBlender]

Happy to help you bro!

[@yearight1205]

@@5MinutesBlender I'm a film maker who has recently started using Blender, since I realized you can build 3D worlds with it. I'm building a Crusader castle currently based on images of actual ones. And this trick gave me the ability to make the windows in the towers. I'll go through your videos to see if you have anything on how to apply multiple materials to an object or building to make it look more real.

[@5MinutesBlender]

That's nice! I am happy to know that you started with Blender. We made some tutorials on various aspects of materials, you can find them in this playlist 👉 kzbin.info/aero/PLtV6EPHDRNQJG_Dp8AgipRizpi6nEk97G Although there are many more topics that are yet to be covered and we do have a plan to include them in near future. Particularly for applying multiple materials to an object, I think you will need to learn about UV mapping if not done already. You can apply materials without UV mapping as well, but it won't be realistic in most of the cases. Tutorials kzbin.info/www/bejne/nKXLlKSrm7h0abc and kzbin.info/www/bejne/Zpqtf3d4fZqcfM0 can be of some help here!

[@HiddenskyYT]

Omg thx

[@chapteriacom]

Great!

[@5MinutesBlender]

Thank you!

[@wallace1728]

very helpful.

[@5MinutesBlender]

Thank you bro 😊❤️❤️

[@wsigned1323]

Didn't know Pathfinder had his own Blender tutorials

[@5MinutesBlender]

😂😂💝

[@harjotjuve]

works very well

[@5MinutesBlender]

Glad to know that!

[@chikkuzinnu9028]

Thanks bhaiya 😊😊😊😊😊😊

[@5MinutesBlender]

You're welcome bro! Thanks for visiting our channel 😊

[@lul7913]

I was trying to model a glock 19 but i did not know how to cut and watched other videos and one said i should use the carving tool add-on and i tried using it but it was trash and i almost lost hope but then i saw your video and tried every step and now i already created m4a1 after the glock 19, thank you 😁👍

[@5MinutesBlender]

Wow, congrats! I'm very happy that we could help you 😊💝💝💝

[@welcometoparacosm926]

this worked out great. just one slight problem. hair particles are where they shouldnt be. just kinda floating where the object used to exist

[@5MinutesBlender]

I guess this is due to duplicate vertices. However, it may not be as well because beveling is tricky - and sometimes it causes very weird issues that are difficult to fix. Even I have experienced this sometimes.

[@bruh-gt1sf]

nothing happens in method one for me (edit so I was accidentally putting a hole in the wrong mesh so I didn't see but the mesh that's getting cut needs the boolean)

[@5MinutesBlender]

Okay, seems it is now resolved. If still facing any difficulties, please feel free to write us back. All the best!

[@sakul_the_one4821]

Name: 5 Minutes Blender The Video Duration: 3:58

[@5MinutesBlender]

Ha ha 😂

[@sizararkan3519]

bro look this is ur latest vid if u are reading this please give me a heart so in know u read this, I just wanna say that ur tutorial is the best and easy and u show us with many diffrent exsample and I just wanna say thanks and countinue being the persone u are, love

[@5MinutesBlender]

Thank you so much. I'm really glad that you found our tutorials useful! Cheers bro 💝💝

[@sizararkan3519]

@@5MinutesBlender u welcome bro keep it up 👆

[@barzucci]

Thank you for informative video. Is it possible to make it with stl file in to cube for example? Thank you

[@5MinutesBlender]

Yes, if you can import the stl file into Blender, rest of the process is the same. The import may not always work for all models, because it is a cross-platform issue - but mostly it works for simple models.

[@barzucci]

Thank you so much for your reply@@5MinutesBlender

[@ShitBrick785]

It absolutely blows my mind that this software is free

[@5MinutesBlender]

True 😃

[@sebbarquin8006]

Is Boolean ok with it’s mesh flow for 3D printing ?

[@5MinutesBlender]

Yes, apply the modifier before you send it for printing.

[@pawandevadiga5820]

nice

[@REZABIDARE]

thanksssssssssss