3 Levels of Laser Engraving - Beginner to PRO

  Рет қаралды 11,040

Make or Break Shop

Make or Break Shop

Күн бұрын

Пікірлер: 48
@asherdiy
@asherdiy 3 сағат бұрын
Dude - that veneer inlay technique is next level. Cool format for a video too.
@makeorbreakshop
@makeorbreakshop 3 сағат бұрын
Thanks!
@ExploringLifeWithChris
@ExploringLifeWithChris Күн бұрын
Very clever way of using veneer with a laser. 👍🏽 I do this with my CNC but the level of detail you can get from a laser is very impressive. I will probably try this on my XTOOL S1 this weekend.
@makeorbreakshop
@makeorbreakshop Күн бұрын
Try it out!
@Scarj88
@Scarj88 Күн бұрын
I have to say, I appreciate every bit of advice that you give. Even a quick hit help video like this is incredibly insightful! Own a small wood and craft business and have been looking deeply into laser machines, with this channel being #1 for honest resources. Whenever we save up enough, will definitely be using an affiliate link of yours. Almost to 100k!!
@makeorbreakshop
@makeorbreakshop Күн бұрын
glad it can help!
@1-Nice-Guy
@1-Nice-Guy Күн бұрын
Great job like always! The tip about engrave against the grain was genius, that is going to help a lot!
@makeorbreakshop
@makeorbreakshop Күн бұрын
it really helps!
@Mmcl9837
@Mmcl9837 5 сағат бұрын
Trotech put out some amazing tips. That inlay process is really cool. Also, I've had success with using Powder Coat Paint and curing it with the laser to fill engraves. Deep engrave, fill with powdered paint, engrave again (different power settings) and you've got a perfectly detailed paint job.
@makeorbreakshop
@makeorbreakshop 4 сағат бұрын
Oh using the laser to cure is a really cool idea!
@LindaHeartisan
@LindaHeartisan Күн бұрын
Awesome thanks. I'm sure I'll watch this again. Loads of good information for a relative newbie 😊
@makeorbreakshop
@makeorbreakshop Күн бұрын
awesome!
@alexduffey
@alexduffey Күн бұрын
Looking good! Can't wait to see the onelaser video.
@makeorbreakshop
@makeorbreakshop Күн бұрын
Just got confirmation its landing in the shop tomorrow!
@alexduffey
@alexduffey Күн бұрын
@makeorbreakshop awesome can't wait! When do you think you'll have a review out then?
@makeorbreakshop
@makeorbreakshop Күн бұрын
Should be next week.
@johndoe6032
@johndoe6032 14 сағат бұрын
That inlay trick was very cool. Inlays are one of the main reasons I wish I had a CNC. It would be very cool to pull off an inlay with my diode laser and do much more intricate designs that I think a CNC can do.
@makeorbreakshop
@makeorbreakshop 12 сағат бұрын
A diode laser could totally do this! In terms of detail your going to get pretty close to what a CNC can do, plus you can do multiple colors/wood types using veneers and laser vs the solid wood you'll need for a CNC.
@rickpouley7561
@rickpouley7561 Күн бұрын
That looks great.. I love the veneer idea.... Thanks!!
@makeorbreakshop
@makeorbreakshop Күн бұрын
when I first saw it my mind was blown
@castlecodersltd
@castlecodersltd 14 сағат бұрын
Great tips, thank you 🙂
@makeorbreakshop
@makeorbreakshop 14 сағат бұрын
No worries!
@carlschulz1057
@carlschulz1057 19 сағат бұрын
Hi thank you for this. Very useful. Did you include the links to the veneer and the metal tape? 😢
@makeorbreakshop
@makeorbreakshop 12 сағат бұрын
Sorry just added it to the description!
@fram1111
@fram1111 Күн бұрын
I don't know why you haven't hit 100,000 because, I've always been interested and now I really want one! I want a laser engraver❤😂 It would be awesome if I was the man that put you over 100,000! Good luck with your channel! I will be glued to your channel whenever I get a chance and I will spread the word!! You're doing awesome.
@makeorbreakshop
@makeorbreakshop Күн бұрын
thanks!
@danthemakerman
@danthemakerman 21 сағат бұрын
Great video really like the inlay projects. I use Gorilla tape to remove/weed the masking tape off the engraving. You waste tape but it saves a ton of time.
@makeorbreakshop
@makeorbreakshop 12 сағат бұрын
great idea! Do you mean you tape it to the top after cutting the pieces out to transfer?
@DerekCadmus
@DerekCadmus 6 сағат бұрын
This is the way
@dansmith99612
@dansmith99612 17 сағат бұрын
Great video with some good tips and final bonus great idea. Lets hope the KZbin God rewards you so you can make more of these and less laser reviews.
@makeorbreakshop
@makeorbreakshop 14 сағат бұрын
More to come!
@PR-WoodWorkingCreations
@PR-WoodWorkingCreations 18 сағат бұрын
*Great Video, All the Tips are very useful!* 🌟 *I'm getting xtool P2S in Next week so probably going to watch your videos again!* 👍🏻 *You will hit 100k very soon, Good Luck* 👍🏻
@makeorbreakshop
@makeorbreakshop 14 сағат бұрын
You’re going to love it!
@carbonvibes
@carbonvibes 21 сағат бұрын
Thanks for sharing, what kind of laser printer would you recommend and wattage? I’m asking as I would like to try doing something like this.
@makeorbreakshop
@makeorbreakshop 12 сағат бұрын
You'll need probably at least a 10W laser just so you can blast through the material and get a deep enough engrave. Basically any diode or CO2 machine will work since the beam can't cut the metal. The higher you go up on wattage just means you'll be able to do the deep engrave and cut the veneer quicker.
@Gadgetbk
@Gadgetbk Сағат бұрын
What color liquid did you use?
@rb2530
@rb2530 Күн бұрын
👍👍
@woodturner1954
@woodturner1954 21 сағат бұрын
You forgot to add a source for the aluminum/adhesive backed tape and the veneer assortment. Thanks
@makeorbreakshop
@makeorbreakshop 12 сағат бұрын
added it, sorry!
@woodturner1954
@woodturner1954 8 сағат бұрын
@@makeorbreakshop Thanks very much for the references.
@riot4817
@riot4817 11 сағат бұрын
what color glue is this?
@makeorbreakshop
@makeorbreakshop 11 сағат бұрын
Black
@riot4817
@riot4817 11 сағат бұрын
@@makeorbreakshop sry ... I mean the brand :D
@makeorbreakshop
@makeorbreakshop 10 сағат бұрын
@riot4817 oh sorry, it’s Starbond
@JohnSmith-rt5yq
@JohnSmith-rt5yq 21 сағат бұрын
The editing jumping around is so distracting. Like, you jump around in arm and head locations almost constantly... do another take ibstead of 8 cuts in less than 7 seconds
@makeorbreakshop
@makeorbreakshop 12 сағат бұрын
your really going to hate all the other videos on my channel then...I might not be for you.
@danjohnson8556
@danjohnson8556 10 сағат бұрын
Perhaps distracting, but shaved a good 5 min off the video perhaps.
From Impossible to Easy: Advanced Laser Wood Inlay Made Easy
9:55
Trotec Laser USA
Рет қаралды 68 М.
Polishing Burnt Wood Like Glass
37:45
Blacktail Studio
Рет қаралды 6 МЛН
Try Not To Laugh 😅 the Best of BoxtoxTv 👌
00:18
boxtoxtv
Рет қаралды 6 МЛН
А что бы ты сделал? @LimbLossBoss
00:17
История одного вокалиста
Рет қаралды 12 МЛН
бабл ти гель для душа // Eva mash
01:00
EVA mash
Рет қаралды 4,4 МЛН
How to whistle ?? 😱😱
00:31
Tibo InShape
Рет қаралды 23 МЛН
Fixing the $30,000 Mistake
37:11
Blacktail Studio
Рет қаралды 7 МЛН
20 Laser Engraving Blanks From TEMU and How to Price Your Work
22:29
Laser Engraving 911
Рет қаралды 235 М.
Woodturning - The Cedar Root
11:38
Matt Jordan
Рет қаралды 291 М.
A Redneck's Guide to Vcarve Inlays.
19:09
M&S Woodworks
Рет қаралды 131 М.
Layered Laser Art- Mandala Style and More: Tutorials, Tips, and Ideas
16:32
Six Eight Woodworks
Рет қаралды 42 М.
I Tested Every Desktop Laser - This is the Best
22:12
Make or Break Shop
Рет қаралды 13 М.
How to Make a Key That Unlocks All Locks - Brilliant Idea!
15:03
LifeHack Wizards
Рет қаралды 3,4 М.
3 Projects That Make Money With the Wecreat (or any other laser)
8:42
Steve Makes Everything
Рет қаралды 18 М.
Try Not To Laugh 😅 the Best of BoxtoxTv 👌
00:18
boxtoxtv
Рет қаралды 6 МЛН