3 Most dissapointing guns of 2024!!

[@joshbrightenterprises1789]

You're absolutely right! That's exactly why I don't like glocks. I'm not buying a $300 gun much less a 7 or 800 that I have to turn around and put $200 trigger in. Period. It cost the factory $5 more to make a decent trigger a great trigger. Canik and walther do it all day long.

[@GSquaredTactical]

That’s exactly right

[@garrettlundy3959]

I actually like the trigger in my 48 MOS. Maybe mine was assembled by the only sober Austrian at the factory 🤔

[@roymiller899]

Everybody is entitled to their opinions. I have 2 G-19s and have loved them for a long time, in spite of the slide bite issue. As my hands age, though, the ergonomics of my G-19s no longer allow for comfortable shooting. I purchased an RXM because it is essentially a G-19 with better economics and comfort. And I like it. So, clone or not, copy cat or not, there is a market.

[@JohnDoeEagle1]

People laugh at Hi-Point but I'm here to say I repaired a C9 for a coworker buddy that was left in a crawlspace full of sand/dirt and moisture for years. The gun was completely rusted shut and packed full of mud/sand/dirt and wouldn't function or fire at all. I completely disassembled it and started getting out the PB Blaster and Kroil soaking the parts and cleaning it all up inside and out. I put it all back together with even the rusty old springs and it worked and functioned flawlessly. We ordered a complete rebuild kit for it off Ebay afterwards but still....for a $125 - $150 pistol that MOFO made the grade cut! You couldn't do any better for a cheap truck gun, boat tacklebox gun, toolbox gun or a garage/barn gun.

[@pats.9213]

Thank you for being so honest. The very first time I shot my Shield Plus, I experienced a lot of quality control issues. The magazines were trash. The trigger pin walked out before it made it to 200 rounds. I have big hands. It just wasn't a comfortable experience at all. The texture, in my opinion, was the best. But ergonomically, I would take the Canik METE MC9 over the Shield Plus any day.

[@GSquaredTactical]

Yes sir Ty for watching and be sure to subscribe if you haven’t already

[@richki.24]

I'm glad all the low budget handguns I bought are all 100% functional ...

[@GSquaredTactical]

That’s the truth

[@WilliamMiller-tv7eo]

Stoeger str-9 combat, Stoeger str-9 and Stoeger str-9c are my go to.

[@N.R.S.412]

Str9mc aint bad either

[@GSquaredTactical]

Stoeger makes good pistol but can’t ever find them or magazines lol

[@N.R.S.412]

@GSquaredTactical very true, I found the 10rd on Midwest gunworks but no 13rd anywhere

[@veonnoel8887]

Have you ever tried the G Force Arms GF9?

[@ajilla1980]

Thanks for the reviews. Im still gonna pick up an rxm.

[@GSquaredTactical]

If you like it one thing is for sure. It works!! Thanks for watching and commenting and be sure to subscribe if you haven’t already

[@ULTRAMAGAlodon]

Jeep??? How dare you?! I like Chevy!!! Im so offended right now! But I think the RXM is irrelevant, too. It's like a Dagger. Why make another one?!

[@GSquaredTactical]

😂🤣😂😂 I drive a 3500 Silverado I’ll bring it next trip to the range

[@JPS1Dec]

Ford! RXM looks more like the Rost Martin. Very similar. Dagger is offended 😂

[@damiion666]

I’d rather have the dagger. It’s the Glock I would have bought with all the ergos and upgrades I would have added

[@dannyb9140]

G... appreciate you as always. Wishing you and your viewers a great Christmas.

[@GSquaredTactical]

Merry Christmas to you as well

[@Headcase650]

I have no problem with the Ruger RXM. It's priced competitively, it fixes the grip angle, has a much better optic mounting solution, it's modular and it has support from Magpul one of the largest aftermarket manufacturers on the planet. If they get additional grip modules in additional colors and magazine lengths, PCC / PDW modules on the market ASAP at an affordable price this platform will skyrocket. The Gen 3 Glock 19 has become to the pistol World what the AR-15 is to rifles. We don't call a Daniel defense an ArmaLite or Colt clone. So let's just call it the G3-19 platform. Everyone's going to make one and put their own twist on it.

[@GSquaredTactical]

I understand your point but I still just don’t agree with or like it and that’s ok we can agree to disagree as we support the same Second Amendment rights

[@CharlesClementsjr]

Have a Merry Christmas! I knew the RXM made your list😂. I’ve always figured in an Apex kit with the price of any Smith polymer, they just can’t get a trigger right(even the revolvers need time with a stone). On a positive note, the RXM pins stay put, and the trigger doesn’t suck😁

[@mac7977]

I got the M&P 2.0 Metal Carry comp. The trigger reset does suck. I put a Ed Brown recoil guide rod with 13lb spring & the Apex forward set trigger in it. Made it way better. My Springfield Echelon(great optic mounting system) & Hellcat pro (my edc) have been reliable also, but haven't tried the Prodigy. Great content as usual. 🇺🇸👍🏽

[@Rayvisin]

Agree.. I've had a few M&ps and the reset is light. My shield plus is audible.

[@HVACR_ToolNut]

S&W resets suck so hard! I thought when they came out with the metal carry comp, they made that thing look so badass, I was like, they had to have changed that horrendous reset for that model at the very least.. I was so disappointed when i put it in my hands and found it to be the same 💩 reset as ALL of the rest of them! I was like, wow, they still have their heads up their ass! So instead, I bought the Walther PDP SF 5". Things happen for a reason, and that PDP was one of my favorite purchases this year!

[@ronaldmertes9180]

Jeep, good choice 👍🏻👍🏻👍🏻

[@GSquaredTactical]

Haha thanks and thanks for watching. Be sure to subscribe if you haven’t already

[@paulfrancois7653]

I don't understand why anyone gets emotional about brands. I picked up a CZ P10C with installed Holosun SCS for $589. But I sold it because I felt like the grip texture was too aggressive for me. But that doesn't change the fact that objectively it's a good gun at a great value.

[@dillonc7955]

I figured the RXM would be irrelevant just from the way it rolls off the tongue. A similar but different thing happened with the CZ75 when other companies got ahold of the design. Tangfolio and many other companies made their own one offs since Eastern Bloc countries didn't have patents. Therefore, you could make your own CZ75 lookalike without funny men in suits knocking on your door.

[@G_B_3]

My shield roll pins walk out too... @150 shots as well. I stopped it with loctite.

[@joshbrightenterprises1789]

I do have to say I had the Shield 2.0 with the hinged trigger and I loved it so I bought the new shield comp and it's fine but the Canik mc9l is better and cheaper. The recoil is so close to the same you can't tell the difference, has a better trigger in the Canik and more capacity.

[@GSquaredTactical]

#truth

[@judge831]

I have a Performance Center Shield Plus (ported from factory). I love it. It shoots great, but it flings shrapnel vertically through the ports (like all ported guns), so I'm looking for a replacement.

[@Jusgunsandsneaks]

My man G… appreciate you honest opinion on firearms. My M&P 2.0 trigger is actually decent…but hey to each is own everybody is different… i ain’t feeling that RXM at all…keep the vids coming bro. Salute!

[@GSquaredTactical]

I could get over the trigger I really don’t care but for $800 should be better. However those pins walking out I can’t deal with.

[@wheelguns4wheelmen802]

I feel the exact same way about comping a micro compact gun (though Shield Plus is already bigger than most micros); makes it not compact enough after doing that. And the $800-ish metal M&P this year looked cool but the trigger was garbage on the one I found. That said, the old 9mm Shield and the EZ .380 have both been good value purchases.

[@kamolharper6041]

Way to sound off like you got a pair I appreciate that!! This review will definitely be taken under advisement!! they waited till the patient was up I honestly think it’s just business. That’s how It go.

[@Jarrow13]

I share the exact same logic as you on these comped CCW pistols. A comp on a CCW pistol makes no sense, it's loud and gives concussion for not very much recoil reduction including wasting valuable velocity that could have been utilized for that extra overall length being added (rather give me 3.7 inches of usable barrel length instead of only 3.4 inches for the same overall length). It's already painful enough to shoot an uncomped short pistol without ear pro in a life or death situation (as that is what the shield was made for), now I'm going to add more concussion and flash defeating the whole reason why I spend money on top tier SD ammo due to it having low flashpoint proprietary propellants. As always great content with a rational and reasonable take on matters.

[@Catgat37]

Biggest problem with a comped or ported pistol is gas and lead fragments. Shooting from retention in a car could literally blind you if that stuff gets in your face.

[@MF-Rell]

At most it's 50fps. It's not that big of a deal.

[@Jarrow13]

@@MF-Rell Correct if we are talking about 3.5 inches and up, but when we go into the sub 3.5 inch domain, we start seeing 75 to 100fps differences that becomes significant.

[@JohnDoeEagle1]

Red dot optics are also incredibly dumb and unnecessary on carry pistols...especially on compacts and micro compact pistols. That's a "new guy/gal" fad and trend. Learn how to shoot the right way with iron sights, carry a more reliable platform and save yourself hundreds of dollars.

[@Catgat37]

@@JohnDoeEagle1 I actually fully agree with this statement. I have wasted a bunch of money on firearms, and even I don't spend the money on red dots....unless we are talking rifles. Getting a 1911 for Christmas and it already has a dot on it, so whatever.

[@DPM-dp9on]

I appreciate your honesty, please continue to provide your unbiased opinions and findings. Most KZbin channels are bs. Having a different opinion gives you credibility.

[@GSquaredTactical]

Believe me when I tell you, I did not want to trash talk an American company. I literally sat in the recliner while my wife looked at me and said aren’t you going to film that video? I said yes, but I’m trying to think of something else, I was more disappointed in than the S&W’s because I do not want to trash talk to them besides the fact that they are a good American company. I also know how much hate I’m going to get in the comment section, but if I’m not truthful now, everyone is going to find out later.

[@GSquaredTactical]

@@DPM-dp9on watch my subscribers fall today. It’s wild how someone will sub because they like something you said about a gun and then unsubscribe simply because they don’t like what you said about another

[@DPM-dp9on]

@ I understand your predicament. I am the same way and always look for an American product as my first option. However, not to be dramatic, but a choice in firearms can literally be a life or death decision. I still carry a Glock 26 because in over 10,000 rounds I have never had a failure of any kind. God bless. Merry Christmas.

[@GSquaredTactical]

Merry Christmas to you as well

[@farhan.naushad]

Thank you for your honesty. I can confirm the pins issue on Shield Plus. Also, most of the magazines will not fully load unless you trim some of the plastic at the bottom of the spring. Compare a mag that you can fully load and the one you cannot and you can see where they missed out in the QC area. Magazines that came later with the Equalizer are usually good.

[@GSquaredTactical]

Yeah the pins walked out on the Shield Plus CC and that’s why it would prematurely lock back but I never done a video on it because of the extreme hate and YT warmings. People just don’t want to hear anything negative about something they bought or want to buy or a brand they love

[@dylanunderpar]

I get the CZ’s are better than the RXM, but can you get optic cut versions for the same $?

[@GSquaredTactical]

Yes I can buy the CZ P10 C OR on Grab a Gun for $429 with $20 off for signing up so $409

[@GSquaredTactical]

I actually bought my CZ P10 C and F optic ready at Blackstone Shooting Sports in Charlotte NC for $399.99 plus tax

[@Brett235]

I went gun shopping last night and the best deal that I found was the mod 3 Springfield for $299 at academy sports. I didn't get it though, I have just too many pistols that I don't even shoot. I was looking for a new carry gun, a new m&p shield plus, no comp but they are still in the $500 range. I'll just wait. I carry the gen 1 shield in 9mm. Edit: Someday I will be able to afford the Wilson Combat carry pistol in 9mm, that's my dream gun.

[@GSquaredTactical]

Eww that thing is nice I’ve almost bought it several times. Thanks for watching and commenting and be sure to subscribe if you haven’t already

[@lordgeez]

Sturm, Ruger & Company was founded by William B. Ruger and Alexander McCormick Sturm in 1949 in a small rented machine shop in Southport, Connecticut. Just prior to their partnership, Bill Ruger had successfully duplicated two Japanese "baby" Nambu pistols in his garage, from a captured Nambu that he acquired from a returning Marine, at the close of World War II. When it came to designing the Company's first product, Bill Ruger designed a semi-auto pistol that incorporated the looks of the German 9mm Luger P08 and the American Colt Woodsman into their first commercially produced .22 caliber pistol (see Ruger Standard), which became so successful that it launched the entire company. Ruger is just sticking to their roots

[@GSquaredTactical]

I get what you are saying but change is necessary to compete

[@JohnDoeEagle1]

IMO, Ruger makes nice .22s (rifles and handguns) and some decent revolvers. They have a few bolt action rifles worth owning as well. Not much else is up to snuff IMO. I'm not impressed they bought Marlin recently either. Marlin had their own legacy firearms prior to the Freedom Group buyout.

[@steven3379]

I kinda want a CSX, but I saw (on YT) it may be discontinued. I compared it with the P938 Legion in the store, I actually liked the grip and capacity better but I went Sig. I might still get one but it won't be until spring or early summer... Merry Christmas to you and your family!

[@tracyknox7915]

Enjoyed the video and what you had to say.

[@garrettlundy3959]

Wondered why you didn’t just get the ‘regular’ ported Shield with the 3.1 barrel. But checking the website those are only m2.0 single stack models, not the double stack Plus. Still considering that single stack Shield in 45…🤔

[@MAGAScott]

I love how people can be so offended by a review, if they don’t like what they hear. There are a ton of reviews out there , where the reviewer likes everything.People are so sensitive and everyone has theiropinion. I personally like the honesty. I ordered a CZ P 10 because of this channel and am sure my P10 C will be a great first gun. Thanks for the honest info🇺🇸🙏🏼

[@GSquaredTactical]

Yes glad to hear about the CZ purchase. Let me know how you like it.

[@MAGAScott]

@ I sure will. I don’t have anything to compare it to, so I’m confident I will. I’m going to take some basic classes. Appreciate your insight!

[@GSquaredTactical]

Yes sir thank you

[@TheRios7018]

The shield 45acp shot ok but ever since I bought it the slide never locked back after last round, called manufacturer and they told me it was a break in issue needed to at least fire 500 rounds! I was like do you know how much money that is! Each round is 50cents geez! So update on the shield 45acp it’s no longer my problem! I will stick with a Glock simple as that! Oh funny thing is I even told the m&p shield manufacturer that I couldn’t recall ever needing to break in a Glock, he actually agreed with me lol!

[@GSquaredTactical]

Yeah just silliness

[@realtruth4259]

LUV UR HONESTY!!!! RARE CHARACTER QUALITY THESE DAYS!!!!! GOD BLESS AND MERRY CHRISTMAS... LUV THE CONTENT GOD BLESS... #GODWINS

[@GSquaredTactical]

Merry Christmas and thanks for the support

[@801guitar3]

That is funny (not "ha ha" funny but I was thinking the same thing) that you mentioned that comping a micro compact will just make it regular sized. I thought that same thing. I think that comping a micro makes it fun and cool, but defeats the purpose of it being small.

[@mentalJourney365]

Both Shield plus had issues for me. Most common one was the slide stop spring popping out from the side. I just can’t understand how every review for this gun is always glowing review.

[@JohnDoeEagle1]

Paid shills and post Obama gun owner GLOCK haters be damned!

[@ArimaxServices]

Please list the Glock clones referenced that you feel are better than the Ruger RXM. I may be in the market for one.

[@GSquaredTactical]

Bul Armory Axe Cleaver, RIA Derya DY9, Shadow Systems DR920, Polymer 80 PFC9, ZEV, Faxon FX19 Hellfire, Lone Wolf Dusk 19 and the ZRO Delta 1. There are likely others but these are the only ones I’ve had experience with

[@CloyceSpears]

Gene I love your honesty keep up the good work. I watched your videos on the Ruger RXM and a lot of other reviews on it, I was keeping an open mind about the gun then I held it at the store and I must say I will never buy the RXM.

[@GSquaredTactical]

It’s just cheap man it really is. It’s a $249 gun at best. $199.99 on Black Friday special

[@justanotherguy74]

You are correct on the Ruger RXM, there is other options that have the same features. The other option is the IWI Masada which has the removable fire control unit and has the option to use multiple red dot footprints. I have put thousands of rounds through my Masada and its reliable and shoots very good. I agree Ruger is a great company and they could have tried to make something new and original. The funny thing is they can do it.

[@GSquaredTactical]

I just sit here and watch the subscriber account go down. Doing videos like this shows me who is really behind me for the truth and who just subbed up because I said something they liked about a particular firearm and they were going to UNSUB at some point anyway because they’re sensitive little ears can’t hear anything negative about a gun they love. The silliness in this country. We call home.

[@q4life551]

This is a great review!

[@GSquaredTactical]

Ty sir. Sadly many will disagree with my opinion and get hateful but it’s the sensitive ear world we live in

[@SB-mw1bg]

It's interesting to me that you and The Honest Outlaw are at opposite sides of the spectrum with the Shield. The Outlaw is a great shooter with this gun.

[@expensivehooby2377]

Don’t believe everything you see on the Internet. The outlaw is shooting 100 yard steel targets with a 3 inch barrel and never misses or maybe someone is standing next to him with a frying pan near the mic

[@GSquaredTactical]

You know when something fails you over and over again it’s hard to be on any side. However, everyone likes something different and that’s ok it does make on right and the other wrong

[@GSquaredTactical]

😂🤣😂🤣 I’ve thought that same thing like dang bro

[@DPM-dp9on]

Remember S&W is big on sponsorship and marketing, not quality.

[@GSquaredTactical]

I don’t want to believe that but I think you may be right

[@JonFox-t5x]

My daughter has a Shield Plus. She can’t shoot it accurately because it’s so snappy. I shoot it very well. However, the trigger has a false reset right before the actual reset. Also the rear roll pin that holds the trigger group in keeps walking out and snagging your hand.

[@GSquaredTactical]

They do bro the pins walking out is what was making mine prematurely lock the slide back

[@JonFox-t5x]

@ Yeah they really need to get it together at S&W. I’m completely happy with my Echelon. It’s a shame you can’t get a good American made firearm anymore without paying a premium. And that doesn’t guarantee you get a good one. You should try a Tisas PX9 tactical. I think it would blow you away for the price.

[@GSquaredTactical]

Yeah I’ve always like Tisas

[@brandonlyon8549]

I just bought a 2.0 not the OG but the one with the straight trigger and the front fish scales. EVERY sales person at the store wants the new carry comp version and he tried to sell me on it, I said no thanks not what I said I wanted. I personally don’t like buying new guns until they work the bugs out. I was a little shocked at how much the sales guys were drooling over it with all the reported issues.

[@GSquaredTactical]

Fanboys loyal to the end. If some of these manufacturers crapped a perfectly formed turd and shaped it into a pistol they would make excuses for why it stunk

[@garrettlundy3959]

I don’t care for the aluminum frames at all. Maybe because where I live it’s -2° today!🥶

[@GSquaredTactical]

Lol

[@sodakhilljack7147]

This is exactly my argument with so many high end guns if I have to customize them after I buy them what’s the point in the price??

[@Catgat37]

What kind of high end guns you talking about? What customizing?

[@rodneyobrien4624]

Jeep absolutely love Jeep and yours is bad ass sir

[@zero_cool817]

It’s all preference. I have the M&P carry comp as well and I like the trigger. I shoot very good with it too. I recently got a Shield Plus. I haven’t shot it yet hopefully I don’t have any issues.

[@GSquaredTactical]

Like I said if you like it then hey everybody is different. I mean, I could get around the trigger thing no question about it as I’m not a trigger snob and have never been accused of being one, but those pins walking out of the frame are a dealbreaker for me. I mean, I’m sure I could get some slightly oversized roll pins instead of solid pins, but I just don’t feel I should have to.

[@zero_cool817]

@ yeah I hear that. Luckily I haven’t had that problem yet. I wouldn’t like that either. I been seeing a lot of qc issues with all M&P products lately.

[@GSquaredTactical]

Yeah I think I got all of them lol. I love S&W but what good am I putting content out there if I don’t tell the truth. It genuinely hurts me to say it. I love the BG 2.0 and I wanted to love this one

[@q4life551]

I have the shield carry comp and that is huge for a carry gun. That is like a full size gun

[@GSquaredTactical]

Yes it is and makes no sense for a shield

[@denniskopecky9124]

Just have to say how much I enjoy your videos. Tell it like it is and if your viewers can't handle it, maybe there in the wrong place. A question for you. If you had to choose between the Canik Mete mc9 LS or the Springfield XM Mod 3, which would you choose? Keep the Wick alive, it always looks good.

[@richki.24]

I'm offended by the Jeep gear ....lol

[@GSquaredTactical]

And that’s ok 😂🤣

[@richki.24]

@@GSquaredTactical , nothing offends me except if someone takes my beer

[@GSquaredTactical]

I get offended by people getting offended lol

[@drewmorg.]

Spoiler alert: you won't find a Glock on this list :)

[@IVORYPaultx]

The honesty 💯

[@GSquaredTactical]

Ty for watching sir

[@efaulk81]

Man the M&P metal carry comp trigger was TRASH!! Sold it after one range trip. No way was I accepting that for the price!!

[@gryphonz3]

I think S&W has had issues with overall quality after their move to TN. Beretta had the same thing happen. The post-move gun's are DEFINITELY not the same as prior. Sad to say...and to see. But...at least they are operating in Friendly Territory. I agree with the RXM being a big miss. Very blocky and slippery. Finish is typical Ruger and the gun feel's cheap overall. I was expecting more, but was disappointed when I actually held one at my LGS. The Dagger is better than the RXM.

[@GSquaredTactical]

Hopefully they improve

[@mentalJourney365]

We should not make excuses for S&W, when we purchase something with hard earned money, it should work…period. Them having to move is their problem. Same goes for Sigs and all the others who had period of reliability issues.

[@TyTy_TheGuy]

I Can't Stand People Who Think Their Favorite Gun Brand Is Perfect. I Carry A LOT Of Sigs, But In No Way Are They Perfect At All And I Wouldn't Go Threatening Folks Because They Have A Bad Experience. That's Just Nonsense.

[@JohnDoeEagle1]

Post Obama "new" gun owners who are adamantly and very vocally anti GLOCK are like the Achilles-heel of gun owners. Super annoying and hard to take......

[@rgtn2441]

Very odd .. the shield and M&P pistols are some of the best out there . To each is own I guess . Have had several shields and M&Ps and all have been flawless

[@GSquaredTactical]

Indeed to each their own I wish everyone could see that

[@JMBAmericanIronShallNotBeInfri]

Your audio is only coming through on the right side of my speakers.

[@brianthomas9445]

We all have our favorites and dislikes. But the one thing we can't afford to get wrong is how you ended this video & thats Jesus christ our savior! Merry Christmas

[@GSquaredTactical]

Yes sir Merry Christmas to you and be sure to subscribe if you haven’t already

[@chuckr5929]

That's a nice gun safe, what brand is that?

[@GSquaredTactical]

Sport Afield

[@YaYa-ke1zr]

I don’t wanna be left out so I choose to be offended by the yellow paint on the wall. It’s not a true yellow at all instead it’s an emoji yellow. True yellow is banana yellow.

[@speedy423]

Gun Of The Year: "Taurus TH10"

[@GSquaredTactical]

If you like it then hey it’s your gun of the year and no one can take that from you. Thanks for watching and commenting and be sure to subscribe if you haven’t already

[@dannypinyan3949]

Good common sense, great channel.

[@whatsup24_7]

Where has your partner been? Havent seen him in videos for quite a while.

[@GSquaredTactical]

He got engaged to be married and started a business and family and resigned from G Squared. It’s my wife and I now

[@whatsup24_7]

Back in the day we called that PW which is abbreviated for 🐈whipped. 😂😂😂😂😂That's cool you kept the channel going, I like your style of vids.

[@GSquaredTactical]

Oh yeah I’ve never met anyone in my entire like that’s so whipped lol.

[@whatsup24_7]

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@cre8tvk457]

RXM is $399, you want too much for that price point.

[@Catgat37]

CZ P10C and P10F is under that price point.

[@JohnDoeEagle1]

@@Catgat37 You can get a real Gen 3 Glock G19 new for $439 - $499 depending in where.

[@oneshoeless]

I bought my last S&W in 2023. Overpriced piece of garbage. I've also seen a lot of issues with their revolvers over the last few years.

[@GSquaredTactical]

Overpriced is an understatement. Thanks for watching and commenting and be sure to subscribe if you haven’t already

[@JohnDoeEagle1]

S&W M&Ps suck for the most part? You don't say...which I 100% agree with you. Get a GLOCK or HK and be done with it......

[@charles17508]

😊its funny to me that people hype the shit out of some of the worst guns and company's i love glock ,kimber and there customer service and ive sold everything else sold my smiths sold my Springfields and really whent to glock in a strong way they shoot fast and keep up .

[@GSquaredTactical]

Yeah I feel ya

[@Tobin-gu6mf]

People carry the 19 easily I think shield comp great

[@GSquaredTactical]

Nothing wrong with that if it works for you

[@trenttaylor3838]

Okay then, JEEP SUCKS !! LOL

[@GSquaredTactical]

Thanks man

[@sedonabear2010]

Yeah, don’t buy the RXM even if you like it and shoot it well, and it runs reliably and accurately, because it’s not original. Your life may depend on it, but please go buy an inferior gun that may break on you when you need it most, because it’s “original“. Pretty lame logic. Everyone tries to mimic Glock handguns, which is a testament to their quality and popularity. But everyone knows that Glock is too arrogant and proud to make some necessary changes to their platform that everybody has been asking for for many years. Plastic sites that literally pop off the firearm when you’re shooting it- need I say more? So finally, Ruger and Magpul combine their efforts to produce and sell the Glock that everyone has been begging for, with some cool upgrades. The majority of reviews that I have seen on KZbin for the RXM are glowing. The gun seems to be simple, reliable, accurate and adaptable, which is all you need for a defensive handgun . Who gives a you know what that it’s not perfectly “original”.

[@JohnDoeEagle1]

Clearly you don't understand the engineering concept of "keep on fixing it until you break it". Ask Ford about the 300 IL6, 289, 302, 351, 390, 427, 428, 460. Ask GM about the 283, 302, 305, 327, 350, 396, 427, 454. Ask Chrysler about the 225 SL6, 273, 318, 340, 360, 383, 440 and 426 Hemi? They "fixed them until they broke them". The same thing for many other things they got right and perfect THE FIRST TIME. Don't keep on reinventing the wheel and remember what a POS the Ruger P-85, P-89, P-90 and P-94 was compared to a Beretta M9/92FS or Sig Sauer P-226/Mk25....or even a Browning Hi-Power or CZ-75B. Oh...I forgot all you post Obama gun owners know everything about everything in a few years time. You are very easy to spot in a crowd.......

[@HVACR_ToolNut]

@sedonabear2010 I'd still take a real Glock over this blocky glock copy. Proven to be really reliable. Have you ever even put one in your hands yet? Dry fired it? I have. I had all the intentions of purchasing it that very day. Until I checked it out in person. I was amazed by how cheap it felt. The slide was super loose, and the trigger was way worse than any stock glock trigger I've ever dry fired. This was my interaction with this pistol, and like I said, I wanted to walk out of my local store with it that day, but instead, I bought a canik mete sft.