3 Reason To Supercharge Your Track Rig!

3 Reason To Supercharge Your Track Rig! - feat DN9630 -

Рет қаралды 922

Ascension Worship - #TechTuesday

Күн бұрын

Пікірлер: 15

@miket1934 5 ай бұрын

If you have seperate mixes for foh and in ears, how would you split?

@AWTechTuesday 5 ай бұрын

@@miket1934 you could route these to channels like normal and send to the ears like any other channel. If you want to double-patch for different processing, you could do that as well. I hope that answers your question :)

@VinylTees 3 ай бұрын

you can do a very similar thing with the DN4816U if you've got a Wing. plug it in with USB on one and and StageConnect on the other and boom, you get a bunch of channels-I think the max number of USB playback channels are 24 from that device. if you don't need more than that and have the Wing, it's a huge savings compared to the DN9630-the only thing is you have to run a 110ohm AES/DMX style cable from your console to the stage, which ultimately if you just buy bulk cable and make it yourself still puts you way ahead cost-wise compared to the AES50 solution. gets power from the console, super clean solution that just works when you plug it in. we turned to this because high channel count Dante from an iPad (which is what runs our keys) requires insanely expensive interfaces so to me this is absolutely the way to go if you want a one-cable multichannel solution from an iPad.

@AWTechTuesday 3 ай бұрын

@@VinylTees I like it

@cxcevents 5 ай бұрын

So in my instance i have three dedicated AES50 lines ran from my wing to the stage. A and B each run to their own 32 channel stage box. C runs to my Hub for my DP48s. In this system could i connect this to the b port on one of the two stage boxes to get the additonal 16 channels the proticol can handle?

@AWTechTuesday 5 ай бұрын

@@cxcevents That’s exactly right :) -Chad

@mariodavidson2255 5 ай бұрын

could you show us how to setup subs using the matrix on a behringer wing. I need more room for in-ear monitors.

@AWTechTuesday 5 ай бұрын

@@mariodavidson2255 I don’t have a video about that but will probably do one soon. A video I do have for you now that may help is this one. You can free up some of the busses you may be using for FX with this trick: m.kzbin.info/www/bejne/bYSYoWihesdsqqM I hope that helps. -Chad

@mariodavidson2255 5 ай бұрын

@@AWTechTuesday I watched that one and I will use it...just needed to know how you did your subs...what does it all look like?

@AWTechTuesday 4 ай бұрын

@@mariodavidson2255 As requested :) kzbin.info/www/bejne/pZyxY5iopryjmpIsi=buYddycLDjIpFVEd

@markallen4127 5 ай бұрын

Hmm. I've been using the USB input on the back of the x32. Trying to figure if this would be any advantage.

@AWTechTuesday 5 ай бұрын

@@markallen4127 That’s great. My only issue is that you have to be fairly close to the mixer to do that. We run tracks from stage so that’s not an option for us. Also, we use the USB on the mixer for Waves processing.