3-way Portable Bluetooth Speaker

Portable Bluetooth Speaker using Dayton ND 20FA tweeter, Dayton PC83 connected in series for mid range and Dayton DC160 for the low frequency.
The Crossover for mid and high are copied from 123toid's Reveal MTM design. The Antenna extension for TPA3116D2 Amplifier Board were copied from 12voltvids.
The Box is about 9.5 litres, port tube of 35mm dia and 3.5 inch long. The sound quality is way above my expectation, F3 around 38Hz.

[@vapingwithjames3370]

Wow I’m blown away what a beautiful design and the way you executed this build is just phenomenal.

[@lennykrapitz4794]

Very cool build! I bet the front cover would look amazing with a satin finish!

[@TheDjcorentin]

The low frequency driver should have its own volume ! It interferes with the midrange speakers

[@YOLOgamer-yq8yf]

nice build man! peaceful music ,not "glueing" the speakers and not messing up everytime. keep the great work up!

[@Toid]

Awesome build! I just saw this. THanks for the recognition in the video description. You did an awesome job!

[@kielebona1084]

One of the most satisfying build

[@gopronomad4381]

Loving the clear plexi element

[@rickhorridge7355]

I’m. Urgently researching speaker builds and although I can’t comment on the audio specifications (I’m still learning) I can comment on the workmanship and that is A1. Amazing craft and care to detail on the housing. I’m sure your next speaker will be even better, I hope mine turns out as good as yours.

[@NBC_NCO]

very nice. I really love hand made things that your neighbors can't run to the store and get.

[@PraveenMV]

Pro finish. My suggestion: If you were used sealed back mid drivers, the bass from the sub will be good. In this condition, the mid drivers acted as passive drivers and may damage it. Sorry for my English.

[@seanmohamad5701]

I just overjoyed watching this video, the music takes me away 😎 Good job, nice outcome

[@devrajsingh2239]

Man he is a Indian guy and they said we are not creative very good work

[@homerthompson6028]

you are pretty creative... at wobbling your head side to side

[@rockdog2584]

Very nice work! The etched window in the top is a nice touch.

[@Toid]

Just saw the shout out to me on the crossover diagram. Thank you! It looks great!

[@floatbob4281]

Wow, you have your own website with free build plans and tutorial. You have really helped me plan my build for speakers I'm going to build.

[@Toid]

Ultra Styles that's awesome! I'm so glad to hear that!

[@inamatibs331]

0

[@inamatibs331]

@@floatbob4281 e

[@lilgwaada97one]

can we have the measurements please thank you nice job you did

[@wdbaudio]

Awesome work! The editing of this video and the music fit so well. You really deserve more subscribers

[@niceorlov9018]

a very good job on the housing and around it. manny detail realy good paint job but inside you can make that visually beautiful too.

[@m215900]

Nice job, if I was being critical, I would have gone for a matt finish on the front, the high gloss cheapens it slightly and the perspex window will be doing nothing to improve the sound. But apart from that well done.

[@Din_Retro_Gamers]

Audio sound aweseome and clear .good one 👍

[@michaelbone2450]

Unbelievable talent my friend! Congrats.

[@JuanManuel123ify]

Una maravillosa obra de arte querido amigo....Felicidades por su gran labor.....Bendiciones desde Las Islas Canarias (España)..

[@Erikdidit]

Nice speaker and video! Keep up the good work!

[@janobotano]

Hola Que buen vídeo con calidad de imagen y música Da gusto ver cosas buen echas felicidades por el trabajo que realiza

[@nakjamkas1]

Congratulations, great job, I want to make constructive criticism that can help to make your work even better than it already is. In a stereo baffle use a single tweeter for a single channel (L or R) or combine them is not good at all, the middle and high frequencies usually have a well-defined separation between the two channels, however not so at low frequencies, reason why some commercial and professional sound systems have a dedicated baffle for low frequencies; having a single twiteer produces the sensation of a monophonic sound and the loss of general quality; also the speakers of the two channels must be isolated between them and the wofeer. Greetings.

[@Burnman83]

Some more constructive criticism: Since your setup has not a lot of power, your subwoofer is basically obsolete. If you had more power, you would run into problems such as the subwoofer working in the same volume as the middle tone loudspeaker distorting them since the air-pressure will handicap/change their amplitudes and frequency range.

[@r0llinlacs]

Terrible design but good craftsmanship

[@TheophilusEmmanuel]

Great Build! Great video! Great music!

[@arielgaitan4980]

Excelente trabajo y mucho amor por lo que hace....lo re felicito

[@frankrdbr]

Este foi um dos trabalhos mais perfeitos que vi aqui no Itube, destea modalide muito bom mesmo dava para fazer em serie e vender um bom produto e otimo acabamento, perfeito mesmo parabens!!

[@bertalankercso831]

I experienced that speakers sounding much better with some sound absorbing material inside. Just have a try! ;)

[@livacreative]

Awesome work man, and nice background score. At least you didn't put this trashy EDM in the background like other Indian KZbinrs, special thanks for that.

[@amitabhsrivastava1255]

I am from India and I totally agree with you.

[@travelartandfood3837]

un maestro de la elegancia

[@joseiltonnemoo6564]

Belo trabalho! Continue assim!!

[@ilovegurusahib]

One of the best bluetooth speakers built here on KZbin. The only bit missing is you haven't provided with links what and where to buy all the stuff from. I am sure this sounds the best cause it is three way. Mickey if possible please provide a list of the stuff you used and where to buy them? Thanks for uploading.

[@MickyRalte]

gurinder singh thanks Soeaker driver are from diyaudiocart.com and amps and battery from aliexpress

[@valveman12]

Nicely constructed

[@electronicshelpcare]

Really great build sir, I wanted to build the same, please suggest that what are the ideal box dimensions if we use the w6 1139sf TB sub, and also port size? Waiting for reply.

[@glasttube9312]

I will agree if you are called a professional person in the project work in your way

[@mamachawngthu95]

Keipawh ka siam ve ṭhin a, hei tunah pawh parts ka chah mek asin😄

[@hi-fihaven2257]

Awesome video, awesome speaker! Great job man!

[@mattfeltham8132]

Awesome build!!!

[@juststuff5216]

Nice build!

[@SpartozZ]

Nice speaker! But you really should change that battery, I build a speaker with one of those; 4800Mah claimed and 1900Mah in reallity, I bought another one from aliexpress for around the same price (11€): Liitokala 12v 4400Mah wich features 6 18650 cells and after testing it, even exceed the capacity: 4500Mah. Those are really great for value

[@MickyRalte]

Spartoz yes this battery is not what its rated.

[@PhaQ2]

I bought one of those battery packs rated at 10,000 mah and was very disappointed by it's performance. So I tore it apart and found three Lipo batteries with a total of 650 mah each. And an old cell phone battery just shoved in there to take up space and add weight...

[@johnquimby7324]

How much usage on average, are you getting on 4500mAh (the good one, not the cheap knock off)

[@SpartozZ]

John Quimby a lot, I've been using it for a month in short periods of time with approximately 70% volume and its still not out of battery, I tried too, to use it at ~50% volume until it died but 2 days later it was still running so I stopped.

[@dinkaboutit4228]

Even if you get a quality pack, it seems like you have to choose between total mAhs and recharge cycles. I say order vape batteries and solder in series yourself. Bout the simplest soldering job there is.

[@DIYtechnology4u]

Nice JOB!!, Impressed.

[@Solidworksmaster]

nice video, nice speaker, but the sound need more bass

[@ismaelrodriguez5893]

Keep up I love your project

[@artannisv5674]

Una obra de arte 👍

[@ukaszczempik1353]

very nice to watch it!

[@alexitanguay]

One could add an Amazon Echo Link and create multiple of these for a multi-room speaker experience :)

[@ToolsAndI]

So cool, excellent job!!!

[@Malicious-32]

Va tha ve... Freddie pawh kha tih tir ve rawh youtube. Van tha si em

[@garyrobar]

Does anyone know the detail on how he extended his bluetooth range? I read that the copper extension wire needs to be a certain length to work, and also that in some cases you need to un-connect part or all of the built in antenna contacts. Can anyone share any detail or insight?

[@RIPTECmedia]

Nice.. ! I like it...👍👍👍

[@timschutte8310]

, it's not a three way as the header says, it's a 2 way speaker with 3 drivers, two midbass drivers and a done tweeter.

[@Ssawekboomboxdiy]

Profesjonalista ,,💥👊🔥👍🏼👍💪 tyle że nieodzielił suba od szerokopasmowców , a tak to zajebiście że 👍🏼👍🔥👊💥😎

[@shauryamishra]

amazing Craftsmanship, the way you prepared the whole setup from building the 3d model and then making the build, But i have the same fear which below mentioned many have said but my question is right now Sub Woofer is simply in a open setup, while many like me thing if you have created a sort of cage(confined space in the setup only) for it , it will not push or vibrate other speakers in the assembly. Do you sell the Kit in India?

[@bunnatang]

It would sound better if you saparate the woffer from small speakers. I know you currently don't like this speaker sound when big bass is kicked in.

[@johnmichaeltoimoy9084]

Tha khawp mai. Video Siam zel ang che

[@tadekrafa4121]

Witam Jeden podstawowy błąd, który popełniasz w swoich konstrukcjach, to umieszczanie w jednej obudowie głośników średnio-tonowych z wooferami. Powinny być odseparowane od siebie, wtedy woofer nie wypycha membran średiotonowców . Tak poza tym bardzo dobra robota.

[@awesomeshots9358]

Bro I'm very interested in this stuff what you are doing , you are the first youtuber I have found from northeaster I'm from Assam...Nice to see someone from our northeast I want to know where are you from

[@MickyRalte]

Mizoram

[@HaimPeretz]

Beautiful build! Does the mid and the speakers are connected in s stereo, right and left and woofer in mono channel?

[@stefanxful]

Can be used combo of 2 full range speakers and 1 woofer speaker?

[@marcvandenbor541]

Very nice my friend....i like it!!

[@joentell]

What kind of feet are those on the subwoofer? I like those.

[@clemildosousaqueiroz2048]

Boa tarde ! Gostei do projeto muito bem acabado.

[@duongle0303]

great speaker and great videos... but the light in mica istoo bright

[@AlexandreNatalMagno]

Esplêndido, parabéns

[@palocirilo9122]

E verdade

[@DJJOAOMARTINS]

Can you give mere details about the toll used to cut the holes

[@MickyRalte]

João Luis Martins u mean tool???

[@Townie_au]

What timber is that?

[@richardcreese]

Great job.

[@salvanascimento7326]

parabéns pelo trabalho gostei muito

[@dinos8107]

Amigo, poderia me ajudar no seguinte, fiz uma caixinha de som usando a placa amp tpa3116, mas o problema é que está dando um 'POC' barulho no auto falante quando desligo a chave de energia dela. Eu já tentei quase de tudo, coloquei chave separada para sequência o desligamento, pra desligar o Bluetooth por último, testei no Pac de bateria 16.8v, só na Fonte com 21v, com a placa de sinal de áudio Bluetooth desconectado da placa amp, sempre dá um estralo mais leve quando liga, e quando desliga dá um estralo mais forte nos auto falantes. Sabe como eu poderia resolver esse soco no auto falante? Principalmente quando desliga? Encontrei uma placa de proteção que recebe alimentação, e tem 2 rele , um em cada entrada dela. E retarda a ligação em 3 segundos após alimentação de energia ao ligar. Mas preciso de um que proteja ao desligar pra não dar o estouro no auto falante. Será que esse mesmo tipo de placa resolveria?

Nice work

[@tejnamburu7409]

Hello @Micky Ratle I liked the way u designed the video , i ordered the same speakers, woofers and tweeters, but not aware of how to make crossover and then how to connect it,speakers, woofers and tweeters to TPA3116D2 amplifier board.It would be great pleasure, if you could make any detailed video or provide information on it. Sorry for troubling you.. Thanks in advance :)

[@tejnamburu7409]

or els pls specify parts details used in ur video so that i will order same to make cross over

[@MickyRalte]

hello, the crossover diagram is there in the video. At 9 minutes 18 secs. If u have more question, feel free :-)

[@tejnamburu7409]

Thanks for reply Response @Micky, Could you pls provide me box dimensions for cut the wood, am really un aware of computer it will be easy for me to cut if u can give me detail sizes for making box, it would be a great help

[@MickyRalte]

where are u from?

[@tejnamburu7409]

Micky Ralte India

[@czeve]

10:00 wait is that background sound is Rick from Rick and Morty? :'DD Btw good job for this speaker, so awesome!

[@dcollop3543]

Great build and vid edit. Poor build though. Those speaker should not be in the same cabin. Or at least, the mids should be in a separate compartment to get better lows from the woofer.

[@davidabenza2039]

well done! Any chance to get the measures of the box?

[@viniciusraubach148]

Ótimo trabalho.

[@karthikt5789]

nice work!! would love to know more about the battery pack you used

[@mazlahhasymi1366]

Good job.

[@rezo786]

Amazing paint work How did you seal the mdf so well? I've tried everything

[@marceloandres2531]

Excelent work, where you purchase the metal foot ? please let me know

[@TINKSTAYLOR]

Hi ive just seen your Video and what an excellent speaker you have made and i was wonderin what where the settings you used for the engraving of the acrylic name plate and the power of your laser. Thanks for your time AL.

[@roshanmenezes3299]

Awesome build man. I’m guessing that’s an 8000mah battery. What’s the average battery life you get in a single charge ?

[@kopyahireng4883]

Inspiratif 👍👍👍 🇮🇩

[@b_2246]

Fabulous I really like that project. The dimensions are standard?

[@aldenyable]

me manda as medidas dessa caixa por favor ( send me the measurements of this box please)

[@chawnghmingliana]

Sub and mid in the same enclosure??

[@jeffclark5206]

I see your amp also has HF distortion due to lack of resistor on the output. I wish they would fix them.

[@Bylga]

Very nice 😀

[@martinthijn3952]

Incredible job !! Confirm you only used glue to hold the box together ? Does the sub not have to be in a separate compartment ?

[@jsminguez21]

They're sharing spaces with mid-range, which is not a good idea though

[@jsminguez21]

And I expected more power to the sound itself

[@MrTadzo]

Nice...

[@dikamualchin]

A va mawi ve! I video hi kalo thlir fo mai a a hmuh a nuam khawp mai. Ka tui ve zawng tak a ni a. Soundblab te leh Kirby Meets Audio te ho kutchhuak nen a inanlohna ka hre biklo. Dayton audio driver hi khawi ah nge lei theih?

[@MickyRalte]

Dika Mualchin i ti lawmawm e. Bibin, diyaudiocart.com hnenah hian a awm nual, a neih loh chuan a chah tir theih bawk.

[@dikamualchin]

Micky Ralte ka lawm lutuk e. Video siam zel rawh. Hmuh a nuam 😊

[@MickyRalte]

Dika Mualchin hahaha order a awm loh chuan siam reng chi poh ni lo. Video te han siam ve la, a nuam ve asin.

[@MohsinAliWaheed]

You used very small battery.

[@ediwitdaheat7798]

I’d buy that

[@harwindsingh]

Loved it.

[@DjferreGarage]

great

[@volarencuba]

Is there a parts lsit for electronics?

[@JamesSmith-qd1dp]

Very nice vid. Is there anyway possible you can give the part list to the crossover please?

[@MickyRalte]

James Smith u mean the crossover diagram?

[@JamesSmith-qd1dp]

Yes I am trying to create this now. I do not understand the numbers of the components. I understand which is the resistors and such but i do not understand how to translate that to parts express part list, and thank you for replying back this is important. The only thing i am doing different is adding another tweeter running in series with the other one. I think that will work fine.

[@JamesSmith-qd1dp]

On mine there will be a driver and a tweeter on both sides and the woofer in the middle floor of the box. I do believe I will have to increase the size of the box volume as well to accommodate the sound. There will be a divider separating both sides with the woofer in the middle. It will be braced up as well. All will be operated with a KAB-250. I will welcome any help on what size of box would be best.

[@MickyRalte]

James Smith are u going to use the same mid, tweeter and woofer as mine?

[@JamesSmith-qd1dp]

yes, just 2 tweeters instead

[@fernandogonzalezjr7299]

You need to dive the box for the bass and the smaller speakers, distortion buddy

[@frankrdbr]

Para mandar fazer uma caixa destas aqui no Brasil seria impossivel, acho que ninguem teria capacidade de fazer uma igual a sua!!!

[@josipkrot9652]

two different speaker drivers in same box with same vent tube??

[@kai_s.5177]

Nice 👍

[@attilablaho1951]

Dear Micky, How did you cut those small circles with router? Could you please show me? :) Thanks