3" Winchester 24 Pellet #1 Buck Hunting Round copy.

In this video we take a look at one of my favorite and best performing 3" factory buckshot hunting rounds! The Winchester 3" 24 pellet #1 Buck is a great performer but almost impossible to find! I have a 24 pellet 3" round that works just as good!! These 24 pellet Win copies have been some of our our best performers in the field for the last couple years!
Important links below:
Roger Adkins KZbin page: / @rogeradkins9146
The Shotgun Scientists page: / @theshotgunscientists
B.R.O. Merchandise available now at the link below!!
stockandrod.co...
/ bubbarountreeoutdoors
Gary Caskey’s Facebook and email is below!
/ gary.d.caskey [e-mail]
Click on the link below to get 10% off of your total order with Marty’s Molds: www.martysarms...
Enter discount code ‘BRO2020’ for 11% off at Svarog Bullet molds: en.svaroghunt.ru/
/ bubbarountreeoutdoors
Email Mr Bill Kalwas for 3.5, 3 inch and 2.75 inch hulls! [e-mail]
www.thexringus...
ckmolds.com
www.bubbarountr...
www.kicks-ind.com
www.ballisticpr...
leeprecision.com/
www.precisionr...
www.truglo.com
www.osceolahat...
Positive Impact Motor Sports: positiveimpactm...

[@charlesdriggers199]

There is something special about hunting and taking game with a shell or cartridge you made yourself. These men trusting your knowledge and efforts is great. Results speaks volumes.

[@quentinjackson3778]

Hi I'm new to reloading and I would like to say that you're videos are like an encyclopedia for the reloading community keep up the good work 😊

[@saltcreekammo]

Wade "beautiful round" Rush... Looks like some hammers. Thanks for the help earlier brother!

[@BubbaRountreeOutdoors]

Yessir!!

[@samsummerall5309]

Yes sir my family's favorite for 60 plus years

[@tomfavre669]

/this old army vet really enjoys your video's. Lots of great information. Please keep them coming and stay WARM. Hasn't been over 18deg. here for over 2 weeks.

[@thadhenley6559]

Love these videos thank you Wade

[@jmartin9059]

*Recent new batches of BINGO CARD might be too small for 12 gauge. Consider .750" , 3/4" or 19mm paper discs made at home with hole punch from hobby store.*

[@l.a.3887]

Good stuff thanks for sharing 👍

[@steveparker684]

Thank you sir , great information.

[@Gunsmith-4570]

Would like to see a tutorial on the Gaep roll crimp tools. Basically which does what, you do such a good job making reloading shotshells understandable. Thanks for such good videos.

[@jeanmarkgranda5061]

Is exelente Bubba

[@curtiseggemeyer5681]

When I did the math of 24 pellets of #1 buck at 40.5 grains per pellet, the load comes out to about 2.22 ounces.(972 grains ) I do not have anything that heavy in my buckshot loading manual , did I write something down wrong , The TPS cushioned 12 gauge 58 mm is not on the BP website, I need help Wade , did I miss something . for a 3 inch Cheddite. hull with 28 grains of longshot. Love your videos , saw that Timber Rattler mess up today. I used to hunt snakes in Texas. carrying a floor sweep carboard container with rattlers in it buzzing against your back always gave me the jitters. Today I wonder if the fangs would have punched through the carboard, LOL i would say yes. Texans are a little lacking sometimes in safety.

[@BubbaRountreeOutdoors]

yeah... the .30 cal #1 buck is too heavy for a 24 pellet load for sure! That's why Win uses a .28 cal pellet. I even use a .275 cal pellet in 1 of my loads.

[@curtiseggemeyer5681]

Thankyou Wade , ok I was confused which these days isn't difficult.

[@BubbaRountreeOutdoors]

no worries at all!@@curtiseggemeyer5681

[@curtiseggemeyer5681]

Wade I obtained a 1969 Lyman shotshell loading manual. They use 700X on Lyman slugs , so I have loaded up some in Feocchi primed shotshell cases ( (616 Primer) Startng from the bottom 21 gr. 700X, 1BPGS gas seal, 1 1/2 inch felt wad, 2 .125 12 ga Nitro Cards, a 1 ounce Foster slug from BP measuring .718 across the ribs. (Roll Crimp) I will let you know how they group out of my 18.5 inch Remington Fieldmaster Pump with rifle sights. I feel by looking at some of this older data that perhaps the slower powders are causing some of hte issues. like HS-6 Blue Dot etc. Just a thought.

[@BubbaRountreeOutdoors]

@@curtiseggemeyer5681 thanks Curtis!

[@raymondbuie5292]

Thanks a bunch Wade! Those look awesome….

[@williamfruit1999]

Great video as always! Fell off hard on the reloading with a cold shop. Back on the slug action right along side with 00 buck. Tomorrow I will be powder coating the pellets for the first time, will update with results.

[@Marsoc358]

Hope y'all are doing well,

[@BubbaRountreeOutdoors]

we're hanging in there...

[@Rucksack57]

Thanks for sharing all your hard work. I just got 2 lbs of Alliant Steel waited 2 years. I have been using Long shot. The only powder I could get but it works great. I have struggled getting components to make up a load out of the Status of Steel book. Most call for Alliant Steel. I live in California. The all nontoxic state.

[@gradyfuller4880]

I do a 3” with 27 pellets of the #2 BAM Buckshot

[@sbk7202]

I've purchased a new Hogden powder called perfect pattern. I've been using it for clays but I wondered how it would perform with buckshot. It's definitely a faster powder, i'm only using 18 grns for 1 1/8 oz.

[@BubbaRountreeOutdoors]

as long as your shot payload weight is the same, you can use your current data! example: 9 pellets of #00 buckshot weigh around 1 & 1/8th oz.

[@BigEssy]

Another awesome video Wade, got a question, i took apart a bunch of old slug rounds and was looking for a load and components to reload the 1oz foster type slugs i saved. Any help would be great. Thanks.

[@BubbaRountreeOutdoors]

this may help: kzbin.info/www/bejne/bIrbZmNjrLWMi68

[@kylefraga5550]

Hey Wade, with cheap drones becoming more prevalent in modern warfare, used for surveillance and dropping ordinance, shotguns are being utilized to dispatch them over head. Are you able to come up with one of your Hammer Dog rounds, in a birdshot, or wider spreading smaller buck, something 2 3/4 that could be tossed together, stronger than commercially available rounds. Might be good to have a couple dozen on hand for any upcoming struggles, just in case.

[@scuba7937]

Mr. Wade, I'm curious if there may be a 3 inch turkey load in the works using the LBC-50 wad?

[@michaelsanchez8457]

Question Wade: Cylinder bore guns use a special wad sometimes to keep the pattern tighter past 25 or so yards. Is this wad one of those that would have that effect, more or less? I think it would, although it's a different application.

[@BubbaRountreeOutdoors]

Ohh yes. The tps cushioned wads are excellent for extended range buckshot.

[@user-TherealBFM]

Wade I appreciate your content and been watching for years, it’s good stuff for sure. I picked myself up some of them cushion wads and was wondering what charges you were getting good performance out of them with 1.9-2.1 oz charge weights over Steel or Bluedot powders. I mostly shoot 3.5in Remington nitro hulls. It seems to me like they’re a little over pressure cause they sure do kick a lot compared to the same exact load with a precision wad or original TPS

[@BubbaRountreeOutdoors]

you don't need as much powder in the tapered hulls like the Remington hulls. In the Remington hulls (3.5") I use a 34 grain charge of Blue dot in the 1.9 to 2.1 oz loads.

[@user-TherealBFM]

@@BubbaRountreeOutdoors thanks for the reply Wade, I’ll try it out tomorrow and see what I get. I’m loading mostly turkey loads and have a killer combo worked up for 3.5 if you’d like to try it out this season

[@TheDeerhunter42]

hey my friend not trying to hijack your video but i watch them all !!! but with turkey season coming up soon here in GA i would love to see a video of loading some more 20 gauge turkey loads, from start to finish and explain your process, i have been loading tss for a while but im tired of the high price stuff. id like to buy a shotgun reload press and was wondering what i should buy with out spending alot of money. one more question what shotgun manual should i buy first. sorry so many questions but would love any help getting started. thanks and God bless. ricky

[@BubbaRountreeOutdoors]

I will work on it Ricky!

[@bradtyson]

Hey bubba hope you're keeping well this new years, how would you shoot steel buckshot, i.e. polished round steel balls? Cheers much love

[@BubbaRountreeOutdoors]

hey Brad... this should help: kzbin.info/www/bejne/pqipc2yui9qamrc

[@grahamkent2122]

Could you use mg42 wad in this load??

[@stevemccrea9419]

To armor has some

[@user-fz2bi8fv4v]

Sir I am curious have you done any reloading of full brass cases for 12 and 20 to adjust your more effective loads. Cases like those by RMC or Magtech or both

[@BubbaRountreeOutdoors]

No I haven't. Not yet anyway!

[@johnnie7139]

What about ballisticproducts super buck .27 cal that is more 26.6 to 26.8 will that do about the same

[@BubbaRountreeOutdoors]

Yes it will work! The #2 BAM buckshot works great as well.

[@outdoorswithtim.576]

Hey brother wade.

[@BubbaRountreeOutdoors]

hey Tim! Still holding yall up in prayer my brother...

[@mot0rhe4d40]

Chilly? Been stuck on the mountain for over a week. Due to this winter weather 😂 Chilly it is 👍

[@timlong1252]

question for you can you shot saboted slugs out of regular shotgun barrel

[@BubbaRountreeOutdoors]

Hey Tim. Yes you can, but they usually won't be very accurate. A sabot slug needs a rifled barrel to get a good twist on the projectile in order for it to perform decent.

[@timlong1252]

thx trying to figure out what ammo to use with this new 20 ga tristar I got @@BubbaRountreeOutdoors

[@YellowHammer26]

👍👍

[@tomparker3654]

I just can't get my hands on 3' shells or hulls! Can you post a video on 2 3/4' buckshot shells?

[@BubbaRountreeOutdoors]

kzbin.info/www/bejne/g3-8k6KKmriekNk

[@stevehendrix6242]

What do you think the maximum range for deer would be with these loads?

[@BubbaRountreeOutdoors]

Beck got 2 deer this past season with this load, both were over 75 yards!

[@steveparker684]

What loader are you using ?

[@BubbaRountreeOutdoors]

I am using a MEC 600jr mark 5.

[@helpme7479]

I got Bam #1 buck and it's 30.1" or 7.65mm will that work on that 24 pellet load? Thanks

[@BubbaRountreeOutdoors]

you can get 18 pellets of the .30 cal in this load. 24 pellets of .30 cal is too heavy for a 3" load.

[@chrisjones5343]

Is this wad a full cut?

[@BubbaRountreeOutdoors]

yes it is...

[@RobertSmith-ub6tk]

I got some blue dot and green dot what would you recommend on the powder weight on them

[@BubbaRountreeOutdoors]

I have used 31 to 32 grains of Blue dot in this load.

[@RobertSmith-ub6tk]

Have you ever use green Dot? I watch a lot of your videos I don’t think I’ve ever saw green dot powder I got it in the ballistic product buckshot reloading manual not too many loads with green dot

[@chrisjones5343]

Wade how much are you trimming off the wad?

[@BubbaRountreeOutdoors]

Chris... I trim my wads to an inside depth of 1 & 3/8ths inches.

[@johnathansimpson8851]

Any chance we could buy some for ourselves? I have my shells made but that one is very hard to get. Let me know if you want to sale any of those shells. Gods Speed

[@garycaskey9623]

Slit depth on your TPSCW? Did I miss that?

[@BubbaRountreeOutdoors]

full cut! I prolly forgot to mention it Gary!

[@johnnie7139]

@garycaskey9623 how can I get on of your 4 adjustable wad splitter. I don't have facebook

[@guvenonur7443]

Lütfen Türkçe çeviri eklermisiniz.

[@jaymatthews03]

For some reason I can’t find the reloading fb group on fb. Can someone please give me the exact name so I can find the right one. I accidentally left the group. Finger slipped

[@BubbaRountreeOutdoors]

facebook.com/groups/buckandslugreloaders