30°Degree North 38cc First Fire 🔥 Mini Rip With A Tech Tip! 

[@gregorydobson4307]

Sounds amazing, and awesome rip. 😮

[@eastsiderc]

Thanks Greg I appreciate it.

[@thunderrc]

My bro that buggy sounds Like Eastside Perfection baby!👑🔥🔥🔥The gas king!

[@eastsiderc]

🤣🤣 the Gas King I love that bro! I knew you would like it. It sounds so good for a bone stock Chinese engine! I really like 30 degree north

[@DrJT-ly3vr]

Always learn great stuff every video... thank you, brother!

[@eastsiderc]

Absolutely bro thanks for watching! I hope you n the fam have a super blessed week!

[@tonymanna9160]

Rips good brother. I love how it sounds. Makes me want to go fire up my 37!

[@eastsiderc]

Hahaha Im sure it does! And I was quite impressed with how good it sounded!

[@kgm5512]

She fired right up!! Sounds like a good ripper! Can wait to see tune set on kill!

[@eastsiderc]

Hahah for sure brother ! Tune it set to kill 🤣🤣!

[@soblessed6438]

Man son it was ripping good. Yes get it over here. It will be a blast!

[@eastsiderc]

🤣🤣🤣 sounds good mom

[@JuanPerez-sp7xn]

That 38cc looks like it got some decent power

[@eastsiderc]

Yeah it does. We will see more of it when I get it over to my brap spot!

[@srerccustoms537]

Good video Jeff the 38cc is a great cylinder I use it on my 40cc .

[@eastsiderc]

Awesome! How are you getting 40 ccs Allen said it can only be made a 39cc

[@srerccustoms537]

@@eastsiderc I make my own crank ! 32mm

[@kingkongrc247]

I've been waiting for this video now my mind is made up about to put my order in it looks like this engine is going to be a ripper thanks 👏👌👍 I have a obr side pipe I'm curious to see if it responds well with that pipe

[@eastsiderc]

Brother that is great to hear. I think its going to be a fun engine when its ran in! it sounded great. I was shocked at the rpms and it was not peaking yet crackling. That was an out of the box tune! Im going to play around with it and find what it likes best as far as gears n Vstack n filter go!

[@kingkongrc247]

@@eastsiderc looking at that little short rip I can tell that it has a lot more to offer

[@colewoodruff6346]

Amsoil saber is for weed wackers, I use ams dominator or klotz.

[@eastsiderc]

And dominator has additives for clutches in dirt bikes and its gooey. If we all used the same and did the same things this would be a boring hobby. You run what you run and I run what I run. Dominator is good for 60:1 Saber is professional oil not just for weed eaters. Real the label its good for all other two stroke applications as well. Dom and klotz are both good oils too.

[@colewoodruff6346]

@@eastsiderc true i just prefer a good dirtbike oil and ive herd of ppl running 50 and 60to1 but all my cousins and friends that ride dirtbikes run 32 or 28to1 so that what i run.just my opinion, love tha channel by the way.

[@gazbo_RC]

I got a olimat silenced pipe, would that work with the 38-45 30DN / Rovan engines? It’s currently on my rovan 36cc Thanks in advance, another great video bro 👊

[@eastsiderc]

It’s worth a try, brother it certainly won’t hurt it

[@RickysRcChannel]

hi pal ive just put mine into my q baja and it wont wheelie and ive had to take the air filter off just to get it moving, but with air filter off it only takes off at high revs and ye wont wheelie any help ty.

[@eastsiderc]

Ok brother you may have an issue. Fearless RC got a bad run of 38’s and the crank seal on one side is not seated and walks out thus creating a lean condition killing power and burning up the engine. You may want to check your seals. If the seals are okay then your tune is way off and needs to be adjusted.

[@DrJT-ly3vr]

Sounds awesome... so curious to see if the 38cc ends up being a killer engine... the Rovan 45cc just didn't inspire me on most vids (except East Side)... low revs maybe? I hope the 38cc will be good in 30°N DDT... I love the 2wd action though...

[@eastsiderc]

The 45 is actually a very fun engine. I will make some vids with it this fall. I gotta rebuild the engine and Ill take it out. It does not rev high at all. But it aint too bad. This 38 seems like it will make some rpms so we shall see. I was surprised it went over 12k in such a short distance.

[@joshchatwin8569]

Where's that rpm reader from and how you fit it brapp brother

[@eastsiderc]

Its from DDM and it has a thin red wire that you curl around the spark plug wire and then zip tie it off. It works well and the most accurate one I have used. I have gotten one bad one though. They are 50 bucks and go on sale sometimes from DDM. You can also buy it from Detroit Performance RC on line

[@anthonythompson4718]

Hey brother I know u have plenty of engines I’m on the border line. What do u think for my Rovan Hybrid the OBR 34cc full mod 7.9hp full mod or the 38cc??

[@eastsiderc]

Hmm well the 38cc is actually a good cheap option that pulls decent gears really. The obr is case read so you will loose a little torque their. Have you considered a Taylor 35? They cost about as much as that OBR but more powerful Id say.

[@joshchatwin8569]

Waiting for that 40gt install in that Baja 5b

[@eastsiderc]

Yea man I will get to it. Ive been so busy I haven’t had much time to do what I want to do because Ive been helping others but Im all caught up now and can start wrenching soon. Ive got a pile of wrenching to do !

[@Harvz78]

What steering servo are you using on it?

[@eastsiderc]

A four-year-old stock, Roven one

[@eugenewaller7257]

Was this the first breaking start up or, is it already broken in ?

[@eastsiderc]

Very first fire up bro ! Its got a lot more to offer!

[@eugenewaller7257]

@@eastsiderc oh wow bruh, I never seen nobody rip a little bit with a brand new engine with out putting it on the the stand and do heat cycles. I'm truly confused now?

[@garofalo1707]

Definitely a good idea to run a little rich with a 2 stroke.

[@eastsiderc]

Yessir I run all my two strokes as rich as I possibly can on the low and clean up the tune with the high needle! I love making power! Beautiful Dog bro

[@stuch77777]

where are you getting those 90 dgree brass fitting for the fuel cap? got a link please?

[@eastsiderc]

Ebay and Amazon I dont have a link just type 5 mm 90 degree fuel fittings and they should pop up bro! Thanks for watching

[@stuch77777]

@@eastsiderc the ones i am finding are not threaded. how are you mounting them to the cap?

[@eastsiderc]

@@stuch77777 I tap the cap with a M5x8 tap and thread it on there. I have s full step by step video posted of how I do up the cap.

[@romper4444]

No bog or lag on the bottom end takeoff at all eh!

[@eastsiderc]

No man it runs quite well for not really being done right 😆! Its cheap enough too and made of good quality parts! However as good as it runs there is A LOT of room for improvement in this little power house.

[@adamkeene6371]

Is 30 degree north an independent manufacturer, or is it made by another company?

[@eastsiderc]

I honestly dont know but I can find out for you.

[@adamkeene6371]

@@eastsiderc found it. It's made by kingmotor

[@Myth-Busters797]

I have the Taylor pipe on my 30.5 I think the pipe is a little to much for the little guy unless I need to re tune the carb☠️🛠👊

[@eastsiderc]

If you have not retuned after changing the pipe then You definitely need to retune it. But it is also possible its to much for a 30.5. It has a rather large stinger. Tuner up brother💪🤝

[@fpvandgasrc4321]

First... been awhile brother

[@eastsiderc]

Hey bro hope you have been good 🙏🤝💪

[@joshchatwin8569]

I didnt like it I loved it 🔥🔥

[@eastsiderc]

Thank you man! When I get this to mom n dads with taller gears it should be fun to see and really sing a nice high note

[@khaosnitro]

it runs? 😦

[@eastsiderc]

Yessir seems like its gonna run nice!

[@thatoneguy2756]

@@eastsiderc is this a box stock 38cc engine , Taylor pipe, what gears and clutch spring?

[@eastsiderc]

@@thatoneguy2756 yessir box stock . Stock gearing 17/57 and it will pull I would say 19/55 when ran in . Only mods are the Velocity stack thats it . Box stock tune too. I only adjusted the idle about a half a turn in . It will be a different animal at mom n dads with a spot on tune and long pulls to see what kind of RPMs it makes .

[@thatoneguy2756]

@@eastsiderc wow! Looking forward to the run after the tune

[@stevenpeters2593]

Nice rip all over dust and I hear cross street Karen yell stop make dust! 😆😆

[@eastsiderc]

🤣🤣🤣🤣😆🤣😆😂😆I love you brother!

[@stevenpeters2593]

@@eastsiderc love u back! 😆🤣