30°North 38cc & Taylor RC Side Pipe A Perfect Match For Power!

Watch the whole vid to see the progression of the running in process ! I highly Recommend this engine for pure entry level fun and fun for the experienced brapper! Cheap affordable fun from Fearless RC!

[@wolfgang4136]

I bet the neighbors were thinking you were cutting down all the trees on the property 😂😂😂👍👍👍👍

[@eastsiderc]

😂😂😂 I cant wait to brap again! The rain wont get outta here

[@kgm5512]

This is a perfect example of how the performance changes as a ring is beat in and seated! You can see it the noticeable performance change. Great rip Jeff.

[@eastsiderc]

Thank you brother I’m glad you enjoyed it . It was a lot of fun! We gotta thank brap mom for the great footage! Without this would of been total crap! I love her so much!

[@kgm5512]

@@eastsiderc we all love brap mom on the camera!!

[@thatoneguy2756]

@@eastsiderc did I hear you say that you will test this engine in that 30dnt truck?

[@kanenstuff]

Ove catching up on the old episodes I missed as a bit new to the channel, she is ripn hard and sounds sweet.

[@eastsiderc]

And I really appreciate you for doing that bro! Thank you very much! I hope you have a blessed weekend!

[@Javier75288]

Good Lord Jeff…WOW! That thing is screaming and still wants more! 👊 👍 Great work brother!

[@eastsiderc]

Thanks bro! Yeah it’s not even ran in just on the second tank of fuel! I was quite surprised actually

[@falconx5744]

Sounds crisp 👌

[@eastsiderc]

Yessir! I cant stand a crackle! Shes gotta scream its little ports off or I wont be happy hahaha. Neither will the engine! I like to keepem happy! Thanks for checking it out bro!

[@eddierivera8910]

That 38 has RPM for days!! 💪⛽️💥 thanks for the Video Jeff 👍

[@eastsiderc]

You ain’t kidding brother I was very surprised it just wouldn’t stop revving hahaha! I love holding it full tilt across the back wood line 😆

[@eugenewaller7257]

First of all, my opinion. The best thing about your Brap videos is the support you have from your parents. Your Mom's truly be into it LOL. And your Dad be having that voice like " That's my boy" LOL. That's truly a Blessing that your parents can also injoy the things that you injoy. Like my parents as well bruh, they rather see us injoy life the way that we do with Jesus Christ and toys than with the enemy and the streets ! Feel me bruh ? Much love for ya truly!

[@eastsiderc]

Oh I feel ya brother ! God bless you Eugene! My folks are very very cool people they are my best friends! They have always supported me in everything and I love that they love the brap hobby! My mom got me this engine for my past 45th Birthday in June! They are the coolest! With out my Mom we would not have this good footage for me to edit up! That’s why I call them brap Mom n Brap dad! My dad got me into brapping at 5 years old! I’ve been around and working on two strokes for 40 years lol. They are my cup of tea or should I say cup of oil 😆😆!

[@eugenewaller7257]

@@eastsiderc LOL cup of oil , I like that and was funny! Yeah brother, that's what's up and may God Bless you and your folks brother. Are you close to Ohio bruh? Just course, thinking if you were we could Brap fellowship and maybe break bread together.

[@4D_Recovery]

Awesome brother I can't wait to see it in the 30 degree north that's what I truly wanted to see !!! You know why big brother Jeff!!!!

[@eastsiderc]

I will have to buy a pipe and try it out in the 30 north brother. Right now you the 30 north has the Taylor 46 in it.

[@kingkongrc247]

Looking like it's warming up 👍

[@eastsiderc]

She sure is brother ! Have a great day man! 🤝

[@Myth-Busters797]

Wow that 38cc gets down thanks for the info and vid I just ordered one for my Baja you the man thanks god bless brapp brapp 👊👍

[@eastsiderc]

Awesome man that makes me happy and you won’t be disappointed!! It rips!

[@soblessed6438]

So much fun. That thing was gettin it!🤣

[@eastsiderc]

Sure was thanks for filming for me mom!

[@mattvonoesen4105]

I love the yellow! She Flys like a butterfly stings like a bee!

[@eastsiderc]

Thanks brother I got a brand new vid of it making some faster laps in the test yard coming this evening

[@sammyboswelldirtybrc7580]

Got it ripping like a beast nice job bro love that 30 degree north body I want one for my fiveT keep them coming 🔥🔥💯😎👍

[@eastsiderc]

Yeah man it’s a real nice body ain’t it. Thanks for watching brother

[@CrucialRC]

Nice rip

[@eastsiderc]

Thanks brother Lance! 🤝

[@Victic005]

Just got that engine today.

[@eastsiderc]

Awesome Im going to share a tech tip for it to get a little more power out of it too

[@Victic005]

@@eastsiderc great, make a video about it.

[@thunderrc]

Brother that 38 North was getting it SON!!!!!!!🔥🔥🔥🔥🔥🔥🔥🔥⛽️🏆Whooooooo!!!!! The Gas King has done it again yall! Blasting and brapping king right here!!! Awesome run bro!!!! Loved every second of it!!

[@eastsiderc]

My dearest brother Thunder I’m glad you liked it man. As you know it’s a real ripper!

[@tonymanna9160]

Grip it and rip it! Sounds great. I know that gear issue all too well lately brother lol

[@eastsiderc]

😆😆why yes you do!

[@alexs15scalerc36]

Great vid Jeff! She was freaking screaming.. 🤣. Have a question about gearing ratio? I just purchased a OBR 34cc FULL MOD and a OBR HPI non silenced exhaust pipe for my baja5b. What gear ratio would you recommend for my platform?

[@eastsiderc]

Brand new I would use 18/56 or 19/55 . You wanna get the rpm’s up to help seat the ring as fast as possible to achieve the best power and seal.

[@stuch77777]

Big dude would you say the 30dgree 38cc is more powerful then the Zen rc320 both stock and with taylor rc pipe?

[@eastsiderc]

Well Im not sure because Ive never tested a zen 320! I will let you know pretty soon though! But ai think the 38 might be more powerful!

[@ostoura9945]

Sweet vid! Quick question. Is it safe for me to run 50:1 saber VP C12 on a stock Zenoah G320?

[@eastsiderc]

That is all I run in every two stroke I own so I don’t see why not. The saber ratio is 80:1 and 100:1 so we are over killing at 50:1. It won’t hurt a thing! You will make great power and keep engine temps low. VP C12 is excellent fuel!

[@ostoura9945]

@@eastsiderc Awsome thanks brotha, gotta take the pros advice! what can I say 🫡 keep rippin

[@waynegilchrist3535]

I have had the 36cc rovan for 2 years now and have already been through one top end rebuild. After I have run about a gallon of gas through this engine does anybody know what kind of numbers I should be seeing on the compression gauge? Thanks!

[@eastsiderc]

Depending on what gauge you have it wont read much maybe 120~140 psi. You need a good short accurate gauge. There are other methods for testing it too.

[@waynegilchrist3535]

@@eastsiderc I've got a good short Regis setup I use.

[@waynegilchrist3535]

Regid not regis!!

[@seanpotter8548]

which pipe did you put in it...bout to order this engine👍🏽👍🏽

[@eastsiderc]

The Taylor RC side pipe! This combination makes great RPMs and power!

[@seanpotter8548]

hey is this a straight drop in..because i seen something about i have to use the original clutch housing/case because the fitted clutch case is not tapped will have to be drilled..is this true?

[@eastsiderc]

@@seanpotter8548 that is incorrect. It is a straight drop in the clutch case is drilled and tapped.

[@seanpotter8548]

@@eastsiderc thank you love the way your 38 is runnomg ordering the set up this week.👍🏽👍🏽

[@Joes5thscalercandguns]

Man my billet brotha that 38 screams I wonder what it would be like if Allen got his hands on it. Why don't you go with blackbone gears

[@eastsiderc]

Thanks bro and Allen was gonna do something with it many months ago but he’s been working on boats n doing other things. He’s got a two or three cylinders I sent him so maybe next year he will build something with them . He did say it’s got a whole lot of potential because these 38 cylinders are quality and have lots of meat for porting!

[@SnookTuned]

​@@eastsiderc I'm just about finished porting my 38 reed top end, I'm getting anxious lol

[@eastsiderc]

I’m sure and if you’re using the 38 north cylinder it’s like a porters casting. I hear it cuts beautifully and has lots of room for improvement

[@SnookTuned]

@@eastsiderc yep, it's the 30 degrees north, it's def different I'll say that. It does seem to cut nice. I got this top end from John at Detroit performance awhile ago, I started it but it kind of got pushed aside for awhile but now my reedcases that were stuck in customs came through and now I'm stoked and want to get this thing brappin 🤗 Def room for improvement, plus them big old transfers 😁 Im excited lol

[@garagexpress]

Hi the endgine is Fuelie 38cc . =-

[@eastsiderc]

Yes its a 38 cc stock engine. Thanks for watching

[@garagexpress]

@@eastsiderc it seems to work well, it seems that the fuelie engines are good engines, it seems that it works better than a zenoah G32..

[@4D_Recovery]

Hi Jeff another great video and dragster!!!! May I get your email to discuss your engine builder thanks bro

[@eastsiderc]

Hey sure brother Ill give you Allens and you can talk directly with the builder! [e-mail] God bless ya brother Wayne I hope you n the fam have a blessed week!

[@4D_Recovery]

@@eastsiderc Thanks Jeff what exactly did you have done to your 38cc by Allen and do you recommend case read for short course set up I want to have real fast pull off and power from low to mid with some top end too if thats all possible !! Thanks again look forward to hearing from you I'm also in recovery so I can relate to what you said about KT's bad comment

[@4D_Recovery]

@@eastsiderc I did mail Allen I also wanted to know if the conqueror pipe that comes with the truck is usable or what pipe should I get as well as the kill switch a must have !!!

[@eastsiderc]

@@4D_Recovery hey brother a case reed is fine for a short course and I did not have anything done to the 38 cc by Allen that is totally stock with my tune my fuel and mix and a Taylor RC side pipe

[@4D_Recovery]

@@eastsiderc wow then I'm just going to go for the pipe and use your tune !!! That engine sounds and performs really well stock !!! I wanted to also add some road wheels and get a rally shell for the tarmac Could I use those drag wheels the nice fat ones from fearless but a set of rears on the front too? Sorry for all the questions bro

[@khaosnitro]

first 🙂

[@eastsiderc]

Appreciate ya khaos hope you are having a great weekend !