30 Minutes of What You Asked For

[@LivingJeepingandAdventuring]

It’s coming together nicely guys, good work

[@JonnyDIY]

Heck yeah matt n josh! 💕👏👍 coming along killer

[@sh-df1bb]

We're gaining on fabrats! Almost to 1st place! You guys have certainly earned it!❤😊

[@slickrock1371]

Where's the link?

[@darksideharleygirl3691]

Bleeping Jeepers the bleeping Jag is turning out bleeping awesome.

[@wavydata]

have yall ever riden the fire break it is pretty close to wiinnrock im pretty sure

[@jjwcobain]

That measuring tape using it while it’s still hooked to your pocket move was pretty nice. I’m stealing that.😮

[@JonnyDIY]

Dont do with your good tape only your free Harbor Freight one though! 😆👍

[@clifsant9266]

i worked with this one dude for six months six days a week 10 hour days and i never once saw him take his tape off his pocket. except to replace it three times. as a industrial electrician working new construction we’d use the tape 145,885,904 times a day.

[@normanpatane2417]

It's coming together. I'm appreciating it for what it is. I hope Hollywood gives y'all a call and asks for it to he in the next Mad Max movie.

[@shanewright6958]

Another good one. It’s coming right along nicely 👍👍

[@burgesst44]

Awesome love the detail ya'll showed this time. I hollered real loud about the steering but ya just wasn't listening. 😂😂I'm in ga and wish I still lived closer, as a welder fabricator and way more id come by and give ya'll free help. Way more meaning i run a full fab and machine shop for a company as ground support for the aerospace industry.

[@Garth2011]

Nice work. Maybe drill an access hole in the skid plate to drain the engine oil and other service needs. Those radiator mounts are a great idea with the grommets.

[@davidwoermansr]

I always go with dual electric fans and with a 195 thermostat i program 1 to kick on at 165 the other at 180 and both kick off at 165 or if its something i build for deep water that I need a snorkel on i have them on toggle switches and just watch my temp gauge to determine when to turn 1 or both on or off and they'll definitely be off before the water gets to them are you putting an engine brake on the beast if so a fan like semis have would be nice flip it on going downhill and it robs power from the engine and paired with an engine brake saves your brakes whill not having to use the runaway truck ramps when onroad driving in the mountains

[@kimberlyvaughan3430]

Can’t wait to see the Ramuar in action 😊 God Bless 😊

[@RobB-z8o]

This build really is pretty darn awesome..been watching bleepin jeepnfor a long time and besides the scorpion crawler and sticking with a 4.0 which is just great, this build is exceptionally really cool. Nice job you two.👍

[@kevbev1524]

Looks like that Santa Cruz Baja 😍

[@antiricergt]

I have to go to tout area every weekend . Having to pick up my son’s little brother. They just moved from Lenoir city to live in oak ridge off cemetery road. Idk anything about the area but I did see a bunch of Jeeps, Offroad rigs full of mud.

[@jkcole3410]

Love your vision ! It’s turning out great!

[@MrBillsfishin]

Really nice progress. Great solutions.

[@xfactor5876]

Looks Awesome!

[@billjohnston5495]

Can't wait to see it in action. It looking sick so far

[@taylormade710]

The truggy is so cool

[@MotoStoriesandmore]

Looking pretty awesome! Can't wait to see it done!

[@MacsSpecialitiesMotorsports]

Cant wait to heard this Holy Grail Fire up!

[@jasonlyijnen84]

8:42 should turn the rubber mount around on top. On the jk they came for the rear forward.

[@andrewinsinga2993]

Great video thanks for sharing I hope to see your rigs one day at windrock

[@donaldhalls2189]

Its coming along great, certainly not what most of us can afford, thanks for sharing, all the best

[@Greg-x8g]

Hey guys doing great work on the truck 4 x4

[@squiggyg.8415]

I’ve been patiently asking for bleepin trapezoids for months now…thank you 😎

[@MarkoMygun]

Nice job Matt , i guess Josh had the Corn dog Flu lol. This build is really lookin good guy's 👍 👌 keep up the great work. Thanks for the video 👋 goin to vote.

[@Bonitacreekrcs]

12:26 it looks like one of those H2 hummer pickups

[@Bearith]

Such a fantastic build!

[@DaveHickox]

Love the engineering process!

[@garychaiken808]

Great job guys. Thank you 😊

[@bobtucker8875]

Sure enjoy the build guys 😜 amazing work 💪👍.

[@flyingmachinecustomparts8227]

Looking good 👍

[@jasonsilverberg8327]

Wasn’t to sure when they started but this is absolutely amazing🤙

[@emilevoyer123]

THANKS FOR ANOTHER GREAT VIDEO

[@jimmccabe801]

Great video. Thanks.

[@zenmaster1761]

I tell you what when you started this bill that was really hard to imagine it is come together fantastic the fabrication you guys are doing is just outstanding I love it I wish you guys would just do this all the time and then put rear steer on it but I realize you don't have time to do that but man that would be a crazy rig

[@powershomestead87]

Look at the hole punch tool from harbor freight. Fab rats got one and he used it all the time. You would have had to drill any of those brackets.

[@aaronb7990]

😎🤙 That's clever not to use any hardware on the low point of the skid. The support structure is there, but the attachment is safe.

[@SuperDeucecoupe]

😮 Hey! Steering's connected!

[@BushmanofYukon]

It's coming along nicely boys. I still think it would look smokin if the body was hemi orange with black stripes across the hood and roof. black deck. It would represent the bleepin jeep colours😊 you can do it. Just get er done😂 dont forget to paint the frame black lol

[@ezmac622]

LOL, watching you do things with the safety glasses on top of your head

[@sh-df1bb]

love it! I can totally relate 😂

[@StormbornJKU]

One thing always leads to another, to another, to another lol

[@squiggyg.8415]

The sneeze timing was pure comedy genius 😎 12:14

[@dewaynepowell8965]

The fall just made us sneeze alittle...lol

[@edwardsimmons3721]

That does look a little funny without the body on it.

[@Letstallklife1954]

Where is the lunch lady with the big smile

[@patrickewing1348]

Don’t hammer the removable crossmember in before you weld it!!!!!!!! Alarm!!!!! You will never get it out or in without a BFH.

[@mikebolan4785]

Do you always work with the barn door open?

[@darrenbauer4985]

Don't you think you should do a doubler? NP203/205 combo?

[@Off-GridLife54]

Will that radiator be able to be removed with those bolts? 8:27

[@JordanFran-J22J]

I was thinking the same thing welded nuts on the tabs

[@719Mitch]

The amount of fabrication that you two have been able to accomplish doesn’t even compare to the other teams.

[@EvanMoon]

Flip over the sentence. The other teams cannot compare the amount of fabrication y’all have been doing to your vehicle..

[@MoaByte-v2z]

I agree and was thinking about that through the whole episode.

[@719Mitch]

That’s what I meant to say

[@jjwcobain]

Rudy’s is pretty far from stock also

[@jarroddraper5140]

Rudy did fabricate and entire frame

[@kevinfoley7704]

Good video.

[@squiggyg.8415]

I asked for spaghetti I hope there’s some in this episode 😎

[@joeeyman7503]

Um 28:02 check the time stamp, zip up your zipper Matt! 😅😂🤣

[@stevencherrett-eb6zh]

Trapezoid word of the day

[@jimsdimideas5383]

Curious how you plan to get that new crossmember out after you had to hammer it in to place…? I certainly would not want to have to fight that battle

[@Facepump]

lookin nice ! wish i could be there helping ya burn welds ;0

[@donaldanderson1881]

Bleepin Jag U Wire!

[@davidwoermansr]

I've got inch and a half bolts holding my utility bed on mt 83 C30 3+3 camper special and the factory bed had 8 bolts where we streached the frame for a 14 ft utility bed with a 10k crane and outriggers and boxed the frame we used 12 bolts and 3 inch neoprene hockey pucks for a little extra clearance so we didn't have to modify the tunnel much going from a 2wd th400 to an sm465 with a twin stick t-case and doublermy doubler stick is on the left of the gear shift the twins om the right got dana 80s front and rear I believe grizzly lockers with onboard air with a 200 gallon storage tank above my gas powered welder/generator with the face stuck through the opposite side box as my torch is in the compressor mounts where the smog pump (or as we call it Cali compliant hp robbing BS) my race shop connection played with the 454 bored it put aluminum intake and heads on iti believe he said he shaved the block or something to bump up compression ballanced and blueprinted (whatever that means I never asked) im running the Holley sniper system in it with a pretty sweet gauge cluster that fit perfectly in the original spotthe relays and control boxes are under the seat with 37 i believe 12.50 might be 13.50 16s up front and 37 9.50 or 10.50 16 rears without spacers at 10 psi they still don't touch she's got to everything I've needed it to on the farm and as my kids mobile mechanic rig and we've yet used them to move our truck the 12k winches front and rear with synthetic line are nice my next modification will probably be side pull winches and a D-ring on my outrigger feet to help the crane get big tires off equipment and whatever else they come to handy for I'm sure once I have them ill find uses for them other than pulling the derby car nose down to weld fix it plates on

[@flyingmachinecustomparts8227]

Watching 👀 this now .

[@EojWashner-ik1sm]

$1.25 TREE !!!! No doubt , sad when the stores name needs to be changed cuz u can't buy $hit for a dollar anymore, damn corporate America killing us all off

[@badmoon5249]

It’s not corporate America that’s killing us, but runaway inflation, caused by the politicians.

[@muddyWW]

BleepinJeep built a new shop because he was too crowded to work in his old one. He then proceeds to build bigger things in his new shop and gets crowded out again.

[@sh-df1bb]

such is life😅❤

[@mikehoffman3690]

When will you estimate the final weight. I guess…A LOT. 🧐

[@dannycarwile1330]

Should have used a nut instead of a bolt at the top of the radiator.

[@BlackAndBlueGarage]

Foam board 😌

[@gonzalez7805]

Nice

[@larryalexander4833]

Good Sunday morning appreciate the video 🛠️🔨🪛 Through it all seek Jesus Christ for he is the answer through it all ✝️🙏💪

[@kylerayburn8524]

Listening at 2x speed you become Ben Shapiro. Love the build

[@williamherring5441]

😊

[@jvcajw1]

Some "progress"... felt like 20 minutes on just the radiator mount brackets... Come on guys. Get some work done! Get this thing driving. I feel like you are going to be sitting on a bucket trying to compete... lol. you guys need to have a shake down and test the rig! Good luck 😅

[@stevencherrett-eb6zh]

You realize the video comes after the work is done, so they've already got another video made after this one so they're actually further along than the videos show because they gotta make the video, then they got to edit the video and they got post the video and then they gotta go back to work and make another video

[@Offroadworks]

How can I get a hold of Matt? I need some help. I know he's a busy guy but I just need a few minutes of his time.

[@squiggyg.8415]

“Capturing nuts” sounds like a girls night out drinking game 😎

[@jimmccabe801]

I screamed really loud about the steering being connected but you didn't hear me.

[@mh-qq2hj]

There’s no such thing as can’t at bleepin jeep

[@johnnymack8442]

There's nothing a dollar anymore at the dollar stores. It's very misleading. LOL

[@ronaldcausby]

That think that thing is definitely a mullet Just like the millet should have never came back that should never have been created. THE MULLET….