$300,000 Printer for Houses | AMT 3D Prints BIG Cat House

[@davidvknous7267]

I think this is a very strong solution for use around the gulf coast. The presenter did a great job showing the 3D printing construction process.

[@Viktor-ms8uj]

Great review! Thanks for the video! The price is around 90-100k dollars!

[@ChrisBigBad]

A cat! Finally a good use for such a system. No more wavy walls, thank you. Please ask them to build a 3Dbenchy boat next!

[@alyssab5501]

That would be awesome if you could get a printer and make content out of audience designs and eventually give the houses away like Mr. Beast. I was impressed when I found out you can 3D print food, I'm even more impressed that people can 3D print houses. The technology has come far!

[@3dtom189]

SEND HIM A PRINTER!!!!! Hard to find someone this dedicated!!!!

[@jayemiller7410]

Thanks again for all you do.

[@automateconstruction]

I enjoy it! Just wait until you see what I’ve done this week I’ve got quite a few videos now in the backlog I may have to start posting 3x a week for a while!

[@slartibartfast7921]

Competition is great, nice to see more players 👏🏻

[@automateconstruction]

Agreed!

[@BarbarisII]

I need one of these

[@budgetaudiophilelife-long5461]

🤗 THANKS JARETT, GOOD PROGRESS AND KEEP UP ⬆️ THE GOOD WORK 😍😍😍

[@me-ds2il]

We need to see more than the preliminary process. How is it finished & the intermediate steps.

[@polarbearigloo]

looks good

[@automateconstruction]

Agreed

[@randyconrad4155]

But there's no mesh or rebar? Won't the concrete crack?

[@marissinka9775]

I've seen an AMT printhead from the inside, there's no special mixer, it's just a hopper for the material buffer, inside there's a "scraper" and a screw that spins at the same speed.

[@painedinks]

Pretty cool!

[@cureworks]

I don't even like cats, yet, I love what the cat house represents. Oh the possibilities!

[@automateconstruction]

100% agree 😂

[@P40BTomahawk]

$300,000 for the gantry, what are the set up costs? the footing /foundation required to support the colons? transportation cost? what is the true expense to print . and I noted one thing, no aggregate?

[@automateconstruction]

No large aggregate, also the set up costs are substantial. Some gantry systems require up to a week of labor, also 1-4 ton concrete blocks at the base.

[@P40BTomahawk]

@@automateconstruction keep an eye on contour crafting.

[@P40BTomahawk]

@@automateconstruction keep you eyes open for Contour Crafting.

[@automateconstruction]

@@P40BTomahawk I had an investor of theirs on the podcast and I have exchanged a couple emails with the Contour CEO. Consider my eyes open wide.

[@julienboucaron9780]

Thanks, curious about the details of AMT material qualification. Something a bit aside, do you know about Branch Technology and their prefab composite technique ?

[@automateconstruction]

Yeah I haven’t visited yet though I’ll have to stop by. Last time I asked they said to wait.

[@SuperNekotan]

very impressive! I like cats so the best video🐈

[@automateconstruction]

I knew there would be someone who liked this video just for the cat house 😂

[@arnavdixit983]

How does concrete flow through it When we want to build tall buildings ? I think concrete must have a high viscocity. 😅 ( I dont know much about it but I just got a questoin )

[@automateconstruction]

It’s challenging to pump concrete up very high but it’s not a novel challenge. The only novelty is the curing speed if you add the right chemicals at the right times it should be possible.

[@sancakli454]

What's the cost of making a standard house with one of these printers?

[@automateconstruction]

Great question but you need to specify the location and what a standard house is there. It’s very different everywhere.

[@patrickmckowen2999]

Very nice 👍

[@archilizer2946]

Russia! Big on engineering, design is yet to be discovered .. :D Thanks for the awesome video as always man!

[@tonytunnell9873]

I would really like to see this used in the West to replace tip or frame homes. I'm thinking along the lines of a hemp Create. I'm a contractor and we literally use an is an enormous amount of of timber for homes or homes and the price of timber is exceptionally high and it's only gonna get higher however however hemp can be grown on large Faris a large farms and harvested in a very efficient manvery efficient manner I think this would be a really good solution to develop. For the future of home building. As well as many other types of structures.

[@saludenagua]

Hemp could solve too many of the worlds problems. That's why it's banned 😅

[@saludenagua]

Produces medical terpenes, CBD and THC in its flowers, produces seeds that have all the amino acids the human body needs, and the fibers of the stock could be used for clothing to building a house. Truly impressive plant given to us from God.

[@howtogetoutofbabylon8978]

You should Google the question can bamboo save the Earth? The stuff grows several times faster than wood and that means that it can grow 15 times more product in the same amount of time and in addition it has several times the capacity for strength 3 times stronger and 5 times lighter then would it's rated better than Steel in some cases. 3 * 5 is 15 + 15 * 15 is 225 plus 225 times more valuable than wood. How light the trusses are after building them out of bamboo is amazing...

[@brandonfigueroa7399]

i hope they send you one

[@jasontang9192]

Anyway how do they repair the building? Like crack below

[@daizhia]

Hey Jarett! I live in Florida and I'm building my property development firm and I would love to access these events...Do you know how I can get access to the conferences you attend? Thank you!

[@brocknelson8220]

Yes this would be awesome

[@automateconstruction]

It was open invite. What’s the best way to announce stuff like this?

[@daizhia]

@@automateconstruction Hmmm maybe at the end of some of your videos you can announce what next event you'll be attending or make a separate video titled "3D printing construction conferences you should attend" or something like that lol...that would be great of you for all who watch your videos

[@automateconstruction]

@@daizhia Lots of the content I get is organized very shortly in advance sometimes even the same day, thats part of how I get so much content in as a one man show. Good ideas if I know in advance.

[@daizhia]

@@automateconstruction awesome!

[@kzulite]

How much cost all the equipment??

[@MyunclegusAustin]

are these or stil in business? I’ve been searching for them I think what’s going on over there has made communication difficult.

[@Revolutionizehousing]

How did they print the cat? Can they print with just a little bit of slope and is throat unique to their printer or can all printers do that? Thanks for the great video as always!

[@schwarzarbyter]

the cat was put together from 150 separate pieces printed on smaller AMT printer. There is a video in russian showing some more details kzbin.info/www/bejne/d4LNkIqmfbl2i5o

[@brocknelson8220]

Hey Jarrett Id love to get a printer some day too that would be awesome. I bought some btc and am looking to use mine to help me get into your exact industry. Let’s buy one

[@kasseen]

I'd be a potential investor in one aswell....hit me up if or when y'all wanna make some moves together!

[@3dcpsolutions381]

How can I get the info you received from AMT? I am working with Stephan Monsour on the ISO 261 JS80 3DCP project. This info could be helpful for us. Thanks.

[@automateconstruction]

I left their website in the description their info is there

[@bhhvvbvgyvbuvv]

Lol. Free house printer.

[@1FeistyKitty]

someone is going to build a robod that can run around and install reinforcements and, feed the mixer and monitor the quality.

[@Laurensvm]

Wait... $160,000 for 12 by 16 feet? That 17 square meter? Didn't know this technology is still so expensive. Would have guessed order of magnitude cheaper

[@slartibartfast7921]

The more people who buy the tech, the more deflationary the industry will be.

[@Laurensvm]

@@slartibartfast7921 of course, I understand the exponential cost decline that can take place but I totally missed the mark on the current costs. I guess it will then takes another couple of years longer before it's viable wrt what I thought

[@automateconstruction]

That’s the price of the printer not the house

[@Laurensvm]

@@automateconstruction that makes a lot more sense. Do you know what the ratio of the costs currently are between building a plain house traditionally and printed? Is it close to 1?

[@slartibartfast7921]

@@Laurensvm I hear you, thankfully there are plenty of players and plenty of competition 🙂

[@HariNaik]

he , i am a bachelor student of civil engineering , please can you help me in our project can you tell us a details of mortar mix , ratios of materials used , please it would be so much helpful of you

[@clusternova6278]

Next vid, How to build your own diy house printer.

[@automateconstruction]

Would be fun! First someone needs to release some DIY plans for me to follow.

[@User-kjxklyntrw]

Is it the price of the printer or the house

[@automateconstruction]

Printer

[@Life-yj1dq]

Интересно

[@josephhenry4935]

Hey I tried calling them all in Russian?

[@holyholo1]

Es monocorde el tipo.

[@bigrichard660]

$160k for a 12'x16'? That's ridiculous.

[@automateconstruction]

That’s the printer cost not the house

[@bigrichard660]

@@automateconstruction ah ok. I was a little surprised by that price, but thank you for clarifying. Apologies for misunderstanding.

[@valeriydergachev]

crazy russian technics😜

[@peternierop3241]

That did not age well: 5:24 Russians finding the most efficient way to remove people from the jobsite...

[@jerrypeukert5732]

Cat house?

[@automateconstruction]

Did you see it at the end

[@HARDMASADA]

Pooty-Putin has taken smart people like this out of the world market~~!!

[@automateconstruction]

I did this video before all that… I am hopeful all this will some day be resolved and technology can be shared properly.

[@zebyurd9530]

Pog

[@carycharlson8796]

It's too bad that democrats need us to have a boogie man as in the russians because the russians are usually nice people that i've met. We have put terrible position with ukraine and nato. I've met russians. I've been to russia. These people are just like us. They're ridiculously patriotic and believe in their system just as liberals believe in their system. All of them have confirmation bias. But they are very technically skilled and capable. If they develop a technology we likely in the west will rarely hear of it so i'm glad you showed this. I hope it works out unfortunately with sanctions it's not likely.

[@automateconstruction]

I’m only interested in technology not politics, it’s a total blind spot for me. I love freedom that’s the extent of my politics.

[@ИванИванов-с3ю2й]

160 тысяч баксов? 😱 В этом "принтере" нет ничего такого, что бы стоило таких денег! - собрать такой самостоятельно можно за пару месяцев. Несколько сварных, из труб, конструкций и несколько не особо мощных электро-приводов, слабенький компьютер плюс шнековый насос для цементного раствора... Если у вас руки растут из нужного места - можете сделать сами. Программное обеспечение будет стоить 500 баксов...

[@kemsleygrantham9882]

Would you be keen coming over and building me one, definitely can make use of ot

[@ИванИванов-с3ю2й]

@@kemsleygrantham9882 я из России. я вообще не могу никуда поехать - границы закрыты, банки русских не обслуживают, путин ведёт чудовищную войну, всё очень плохо.

[@salahreda9339]

@@kemsleygrantham9882I wrote you many times but my reply always deleted I don’t know why , I am from Russia and have conceptual design for this printer , I can build it for you , text me if you are interesting.

[@jasontang9192]

Wow 160thousand? I thought they all said the price cost is 70%cheaper ?why so expensive?160thousand is the 3d printer or house?

[@OJesusX3]

It's the printer. 😊🌎☀️

[@techno2023logy]

This video is very fun because of the stupid darth vader😀😀😀

[@МаксПрокопыч]

👎

[@redkloudvi5ionempathsparad827]

👌👽#QUEENELIZABETH👌👽#BARACK👌👽#OPRAH👌👽 👌👽#ELONMUSK👽👽👽👽👽