$3000 Copart BMW Z4 - New Wheels and Strut - 1st Drive!

[@garyshear3383]

Happy Birthday on the 17th!!!!!!

[@AutoAuctionRebuilds]

Thank you Dad.

[@justaguyproductions2603]

Happy birthday randy

[@AutoAuctionRebuilds]

@@justaguyproductions2603 thank you

[@superbird426]

Yea! Happy Birthday Randy

[@aleksandarbacinski888]

Happy Birthday 🥳

[@shaunbailey9272]

I for one like the longer videos. You are probably the only channel of this type that i consistently watch because you always have interesting content even if its with a car i don't particularly like. you are very consistent where most channels don't put out this much content. Just wanted to let you know that you are appreciated and to keep up the hard work. it's not going unrecognized. especially during lockdown.

[@AutoAuctionRebuilds]

Sir, I really do appreciate that compliment. Thank you. And thank you for watching!

[@Markustajahoyrylaiva]

I think the same way

[@LaMaRaGe0622]

same here. its something for me to watch and kill time. Content i can watch to get my mind off other things.

[@brian5o]

@@AutoAuctionRebuilds I am sure most of us feel the same way as Shaun does, Randy. I personally look forward to your videos most of all of the KZbinrs I subscribe to. While I have been a very little bit disappointed that I haven't been able to get my Copart walk-around fix (I have been watching TK's but I prefer yours) I am sooooo glad that you aren't putting yourself through going out in this crazy-cold weather. You deserve a break and I am glad you're sort-of being forced to take one because of the weather, even though you're still plenty busy. You always have interesting content whether at Copart or not. The Z4 was such a score, it's a beautiful car, you can tell that prior to the accident it was pampered and I'm sooooo happy you saved it and I can't think of better wheels for it than the ones you purchased. That car looks soooo good now. I'm sorry about the SN95. It sounds like it should be an easy fix. If it's not, is it possible to put heads and intake manifold from a Cobra on your 4.6? If I remember correctly, the regular 4.6 Mustang GTs were dual OHC and the Cobras had quad OHC? I am sure that the bottom end was beefed up on the Cobras, too and it would be a shame to put too much stress on the engine if the bottom end wasn't built to take it but if it could, the Cobra heads and intake could probably be purchased new, it'd take care of the spark plug issue and give you a bit of extra power to boot. Like I said, I am not sure if this sort of project could even be done or if it could, if it should however it might be something worth researching, especially is you are unable to repair the threads of the spark plug socket that failed on you.

[@Steelman0355]

BTW Randy! I just got finished putting a Valve Timimg Control (VTC) in my 2014 Honda CRV. Saved myself $800 on the labor alone. Never would have tried it without watching yours and Wierd Beard's channels. REmember I'm 65 and an old school mechanic. Working on these newer vehicles is a chalange for me. Thanks to you guys for the confidence buiding videos.

[@AutoAuctionRebuilds]

Heck yeah man!! Thank you for the compliment!

[@thetruthwillout3347]

Good job....noticed that the anti rattle clip is missing on the caliper. The M54b30 engine is an absolute peach😎

[@Luisrc.95]

Throw a thread insert on the Mustsng and call it a day, I had one that I hooned like no tomorrow with it Never blew out the plug again

[@Logan_Dunn17]

Dude the wheels look sick! I love the wheels and the car in general, the Z4 is one of my dream cars man. Hope the Z4 project continues

[@brendatrude1497]

I haven't seen anyone change struts since I helped my dad back in the 80's. Your task was more complicated. Good job! Thanks for sharing

[@babygirl89123]

Randy.....two words..... Super Glue!! Used it a ton of times to hold nuts and bolts temporarily. I've even glued nuts inside the boxed end wrench before. It seriously works when you're in a tight spot or when you're by yourself but you really need that third hand.

[@AutoAuctionRebuilds]

Excellent idea!! Thanks man!!

[@AutoAuctionRebuilds]

Sub to Austin Carr: kzbin.info/door/O35wGEvnaOV6L93qkw4tEA

[@austincarr5441]

That Z4 looks like fun by itself!! and Thanks again for the Shout out and I appreciate it as always, and I got your back as always(when I can)!

[@rossfield8850]

My best mate bought one of these 3.0 back in 2008, proper blast of a car, lots of ceremony, standard manual BMW gearbox like you’re stirring a bucket of bricks but I loved it. His dad still has it...good times 😆

[@darylnicklen3685]

Love Austin C he's always there when you need him. What a great friend you have there. Like the Z4 its different and that's how it is here. Can't wait till coronet returns as long as you don't do any short cuts after all the work Mike is doing.

[@jeremyryan770]

I'm kinda glad that we don't get temperatures like you guys here in Australia, keep warm mate and those wheels look great as well.

[@charlierosenbusch3007]

The z4 has always been a little monster all it's own. F the haters first it's your money not theirs. Second 98% of us will always have your back thanks again for the content. Stay safe in that nasty weather. Until next time.

[@AutoAuctionRebuilds]

Thank you brother!

[@makpsv]

07:03 I was hitting mine myself at what I was hearing. I'm glad you will actually put Bilstein shock to match the other ones. 😅

[@bigalsbikeandauto]

Those wheels make the whole car. Great buy and can’t beat that quick easy fix.

[@ThorneyGryffon]

Help keep the temp controlled in the garage by installing freezer strips. You won't lose as much heat or cold when opening the doors. Plastic strips you hang vertically like used in a warehouse.

[@olikat8]

Randy, use the "Big Sert" spark plug insert. Use diesel sleeve cement from a diesel truck shop ($30+ a bottle)/NAPA/real parts store. As the owner of a Triton V10, I've been down this road...

[@AutoAuctionRebuilds]

Ohhh so you already know!!

[@Boga217]

Real parts store? Watch mortske he got a brake master from napa and they spelled it break master right on the cap. Napa doesn't have any better parts than the rest. Go oem or online for parts. No parts store is any good especially with the markup on parts.

[@Boga217]

But on the plug solution I do agree your right.

[@gerhardorosz7984]

I have to be honest.. I tought that the rims wouldn’t look good when I saw the rendering but now when I saw them on video they look awesome on that car, they suit it really well..good work!

[@authorizeduser4603]

So glad Randy finally moved on from the bright, chrome look.

[@jeremyk8157]

The Z4 new shoes are hot! What about modifying the Z4? That would be different.

[@poplaurentiu4148]

I know an Alpina would be much sweeter but with a front lower chin +more power, maybe some full titanium exhausts this Z4 will definitely turn into a keeper.. ;0)

[@datdudzaverage1469]

Summer is right around the corner Randy, get it right for your ol lady for a kick around ride in the sunshine, great content as always my man.

[@jermainesudler1136]

VGG for the win lol! She looks good Randy

[@msiraco]

@@tonebonebgky2 that’s factree

[@bigkev10101]

I had a Z4 I bought from an auction too and I loved it. Glad you got it for the channel.

[@danielcarter5579]

Oh dang!!! Bad SN95!! I had that happen aswell randy on my 1997 VW cabrio, I parked it went into store, came out, and turned it on no pop or nothing but it was a LAWN MOWER and I towed it to a shop, they saidni got lucky because it didn't damage NO threads, so I hope the same randy!!!

[@rickygambill723southsideki7]

Randy every car you rebuild is a blast to watch you do and everything else you do with cars is great keep up your great job doing what you love doing

[@AutoAuctionRebuilds]

Thanks man!!

[@rayphillips332]

You did good Randy on your purchase of the Z4 BMW.

[@riobonito]

Randy, this car is phenomenal! Its valve system is Double Vanos which acts on the intake and exhaust. This was the first generation of the Z4 code E85 / E86. The E86 is the Coupé version. M54 3.0 engine with 228 hp of pure fun, and it's not a girl's car ... NOTE: These wheels are perfect, very similar to BBS! This Z4 is a fun machine.

[@lisaleibman2780]

Ahem.. Not a "girl's car"?? The ZSCCA has quite a few female enthusiasts... Who drive all variants...

[@bigscout1584]

BMW has a wheel alignment tool in the trunk for replacing tires. You take a stud out then screw the stud alignment tool in and that will assist you with putting the wheel back on

[@brandonlink6568]

Wait, WHAT?!

[@TheKorysmith]

Happy for you man on the BMW Z4! My neighbor has one put away in his garage (It may be a Z3) which has James Bond DNA which was back when Brosnan was Bond . I have not seen it but your video has made me want to see it. (It may have been a stand in car or something)

[@ronwig7665]

Randy that your feeling about the run flats, but when you stuck on the interstate with flat and a mess up rim, your opinion will change, B M W don’t come with jack or spare

[@AutoAuctionRebuilds]

Rims are cheap bro, tires have road hazard. I also have AAA, and Hagerty Roadside. I'm covered.

[@rcenthusiast7130]

Happy to see you like the power of a straight 6. I personally find they have plenty of power to have fun with.

[@speeddemon945]

the best 46+ minutes on YT! :D good job Randy!

[@PAUL-1961.]

Randy when you cut the treads its a good idea to put grease on the tool,it will catch the filing from going into the cylinder

[@nigelwright4796]

Nice car Randy, bags of power don’t believe the naysayers keep going your doing well. Good content really enjoyed it

[@TroyFujimoto808]

Your Z4 was a great score! It’ll make the second owner really happy!

[@Thecampervanlife]

They are great little cars, I rebuilt a black 2006 Z4 from Copart here in the uk and had a fun summer thrashing it around with the top down! Love the channel and watch all your videos, keep up the good work 👍

[@jimfrese7579]

Those struts are bear to get in installed. I used the old reliable harbor freight jack to lift strut into place. Good job you got it all together. The wheels look great

[@drewbenefield2001]

I love the wheels on the Z4!

[@rico8294]

Love the video Randy can’t wait to see more of the z4🇦🇺

[@drewbenefield2001]

@@rico8294 yes!!

[@dustinwilson1981]

Stay safe Randy. Nothing like good ol Oklahoma weather. Changes like people and underwear..... Sometimes until soiled

[@chrisbasketball123]

The Mustang is looking so beautiful in the background. Can’t wait for the next video ❗️

[@79Dakine]

This was a good productive episode! BMW is turning out to be a good project. The smudge of oily dirt on the side of your mouth had me dying because you had no clue while chatting away 😂. Signs of hard work

[@6996brandyl]

Your ghost went into hibernation ,they shut the heat off,GOOD VIDEO!!

[@kennethstevenson976]

There is usually an alignment tool in the tool kit to help get the first lug bolt started.

[@paulbingville6485]

Original wheels are good looking, new ones are flat out awesome looking!!!! As for the fender, it's a good looking car and I think it deserves a new one.

[@AutoAuctionRebuilds]

Right on

[@dcpoolsvc]

Love that car! I knew I liked it on the walk around, but with the new wheels and seeing it driven, I’m in love!

[@2003cobramustang]

Z4 is the great little car!! Great pickup! Hopefully the mustang is ok can’t wait to see the video! Enjoy your content Randy! Love the wheels!

[@AutoAuctionRebuilds]

Than you!

[@mikaeljonsson4686]

Car looks really good with the new wheels!

[@dalecain1158]

Before you bid on the Z4 I told you it would be a good one. Yes I love the new tires and wheels too! I live in Arkansas and it’s freezing here too with lots of snow on the ground!

[@AutoAuctionRebuilds]

Hopefully we all get some warm weather soon! Thanks man!

[@joseotero5490]

Randy the Z4 looks beautiful the wheels they are perfect thank you very much for your videos

[@jbshuggy]

Randy - Really impressed with the quality of your videos, especially this one. It's starting to remind me of the automotive shows on TV. Great work!! Also, HAPPY BIRTHDAY!!! I'd send you some cake, but I think the storm will stop it from getting there :D

[@damienlery7550]

Hope you are keeping safe and hope your HQ will stay nice and warm and safe ..... Enjoy the snow and the beauty of it ....

[@robertfoye1620]

Had that happen on my Lincoln Navigator did the repair drove it for twelve more years sold it with 100,000 miles it still going still.

[@toslowoverthehill]

Love them rims & tires....... R&R the fender, fastest way to get it done & I think the cheapest. Good luck & stay safe........

[@danielhartin7680]

I hope all the pipes in both houses survive this cold. As you know, the conditions down there the past several days have been unprecedented. Don't remember ever seeing winter conditions like that in OK and Texas.

[@markrides7939]

Hey Randy check the toolbox in the trunk of the Z4 there should be a metal bar about 8 inches long you insert into one of the holes in the hub and then slip the wheel over that it helps locate the rim.

[@AutoAuctionRebuilds]

Thank you

[@drewbenefield2001]

The ghost missed you!! The Z4 is expensive!! I hope all is well bro!

[@AutoAuctionRebuilds]

Thanks man. So far so good! Did you catch the members only video yesterday?

[@drewbenefield2001]

@@AutoAuctionRebuilds I did!! It was awesome!!

[@fannatick2]

In regards to the home heat, I would suggest examining the exhaust vent. The slightest resistance in the exhaust can cause a fault. I've seen in-pipe condensation (from a belly in a pipe) and ice forming at the exterior vent cause an issue.

[@rayphillips332]

They match the color of the car they really look good.

[@1chish]

Thank you for the 'Zed 4' Randy 👍👏 - Appreciated. We call convertibles 'hairdressers cars' but its not serious. These are superb cars that are very refined and that 6 cylinder is as near bullet proof as BMWs can be. That front wheel height is possibly down to the missing sway bar link (and the 'not quite factory' front wing (fender). You did well with this one. Enjoy.

[@DocMackGarage]

The Z4 looks awesome now. The first I heard of Austin was in the 528i video if I am not mistaken. Seems like a nice person.

[@johnsample9671]

That thing is a quickie for only having 225 HP and also HAPPY BIRTHDAY Randy love your videos

[@zachalamiri9195]

i love the z4 been a fan of you for like 2 years. love watching you grow brother.

[@AutoAuctionRebuilds]

Thanks man! I can't wait to get out and drive her more!

[@cjtr83]

Really like these Z4's, Videos kinda making me want one tbh. Those wheels are such a nice choice for the car. Size, style & colour looks great 👌🏻

[@matthewortiz704]

Take care in that weather Randy, stay safe it must be extremely cold there.

[@AutoAuctionRebuilds]

Speaking of Miatas :) how’s it going man?

[@waske6192]

It must be cold as he works in his jacket.

[@matthewortiz704]

@@AutoAuctionRebuilds Lol yeah, I was watching the video and then I heard you say"this ain't no miata" I got a kick out of that, the best part is just cruising in those back roads listening to some jams and enjoying it. Obviously not now with those negative temperatures lol!

[@brian5o]

@@AutoAuctionRebuilds Man, I soooooo hope you're able to pick up a Miata one day, Randy. I've driven a 1995 NA (5-speed manual in Black) and a 2001 NB (6-speed manual in Crystal Blue) and they were both so fun. The cars belonged to a friend but I hope to get my own one day. I'd love for you to get a nice NA but a great NB Mazdaspeed or hard top retractable would be a close 2nd. I really love the M-Editions on the NAs, too. It really is a shame that Mazda stopped building M-cars (and Mazdaspeeds for that matter). I guess on the good side, you can at least still get a manual transmission throughout every trim level and body style of the Miata which is definitely something. Besides the Miata, you can only get a manual in a Mazda 3 hatchback GT which is kind-of sad.

[@matthewortiz704]

@@brian5o Same, I would love to see Randy buy a miata, any body style I love them all.

[@samzemtsov1514]

Happy Birthday, Randy! All the Best!

[@tommyhall350]

If they don’t like the car don’t watch I love all your videos take care

[@nayyeriqbal7142]

happy birthday Randy. Love the video of the BMW. Love the tires. And i think Casper miss u hahahahahaha turn off the heat to bring you back again Danson hahahahahaha GALI

[@boatfreak207]

My "trick" for installing German cars wheels (lug bolts instead of nuts). Have the socket with a bolt in it (no impact) in hand, place the wheel, start the lug bolt in one of the holes toward the bottom of the wheel, hand tighten. Use the socket to start the rest of the bolts, zip down with impact. Then I would torque to spec. I like the wheels and the Z4, looks like a lot of fun. Tempo looking much better with the bumper covers. I'm guessing you don't normally get much snow in Oklahoma, I don't see a snow blower. Hopefully you'll find a way to have some fun in it, at least some donuts in an empty parking lot. I think you have a dog, fun watching them in the snow. Otherwise make it pizza/movie night, snow shouldn't stay long down there. We got 20+" of snow Feb2, its still here and we are getting more today through Saturday in upstate NY.

[@Broadshore]

There is an old saying from my dad. Make it work! If the PART'S are to expensive. Then find a Alterative. Pick a Part is your friend. Also, ASA Rims! NICE! Want to get a set for my 2011 xB. Randy??? I'll be honesty??? I believe that Fender can be..... Fix? With the Right Body shop.

[@franklin01c]

It never fails I get a good show every time

[@MvP4eVa1]

That BMW Z4 looks clean . Gorgeous car.

[@anthonyhawkins9239]

Love the wheels on the z4 👍, it was built for the American market ! It’s a decent entry level sports car 👍

[@AutoAuctionRebuilds]

Agreed. Thank you.

[@garysimonson9593]

I like that Z4. I'm not much of a BMW guy, but I think that's a nice little roadster. If you find a nice fender in the right color a swap makes sense - otherwise I'd just have a body shop straighten that one and paint. Fun cars, though. Friend had a 2000 M Coupe with the stage 3 Dinan supercharger and tune, it was a beast.

[@evoxus11]

Your missing a clip for caliper on that left side.

[@lirr408]

I like the reruns. Sorry for the heat problems. Hopefully it warms up for you. We are getting a thaw here on Long Island.

[@turbointegra82]

Been excited for this video! Your awesome Randy!!!!

[@rcenthusiast7130]

Those wheel are looking good, very good choice Randy

[@sebastianlarcherdebrito6048]

Hey Randy, those wheels and tires look great!!! It’s not a bad car at all

[@thomasc4753]

The Z4 looks great man! The rims really suit the car.

[@billb8788]

Napa here in Canada has the spark plug repair kit . Comes with plug new threaded insert the tool and some locktite. Works like a charm I have bought a lot of old fords with blown spark plugs repaired and transfer great and I keep a spare kit in my glove box cause its going to happen on the other ones too

[@scottmurray6977]

Just a FYI. You BMW is missing the caliper retainer. Hooks into the 2 holes in the caliper and springs onto the caliper mounting bracket. Great video and cool car

[@kristopherbell7158]

These are actually good reliable cars. I have one and love it

[@paulcushnie]

You are missing the brake retaining clip that goes in the 2 holes in the caliper to the caliper carrier on the damaged side. Also for fitting wheels bmw have a black plastic bar with a thread at one end in the factory supplied toolbox. You screw it into 1 wheel stud hole then slide the wheel over it and thats it perfectly aligned then you start fitting the rest of the bolts then remove the black bar and fit last wheel bolt.

[@stevesamuel6603]

Oh yeah excellent work Randy , you got that beast back on its feet and she looks good but I still feel it could do with a Bilstein Strut Randy just the srut find a used one and put the spring from this which you have and rest of the components back together but still she looks mean and aggressive , an excellent amount of power bcos I could feel from the the video itself its real quick and fast man that's a beast for real , love that beauty and of course man the Msport wheels for the z4 look sick but these wheels they look mean man if you don't already know they look exactly like the BBS wheels in this same style which are very famous and people love them , so these wheels are exactly the perfect taste for this beast , Randy you have good selection man keep it up , Love , love , I'm in love with how this machine looks now she's NICE !!!!!!! Now Randy yes don't forget to put sway bar end link , and the the bilstein strut bcos you already know this thing deserves it , but coming to the point of the fender , man IDK , what I'll say is that yes that fender can PDR' ed no doubt but what you need to look for is how much it will cost right get an estimate on it and if its higher then why think anything else get that fender in the same color you found , but if cheaper to PDR then do it , so do according to the price in my opinion , but definitely PDR that small dent in the rocker panel , align the bumper , and put the clips of inner fender liner back on and that things brand spanking it's like nothing ever happened . Good content Randy so interactive and friendly you are , keep it up , I'm sorry I'm late to wish , but HAPPY BIRTHDAY AND MAY GOD BLESS YOU THIS YEAR , Stay safe and blessed dude .

[@benjaminjenkins4985]

Awesome little BMW Z4 Randy! Love the new shoes on her! Can't wait to see what is to come for her! Also, good luck on getting that spark plug/ cylinder head issue in the #sn95 fixed! Also ready to see more on the Nissan Altima 3.5!

[@jldoctor]

Nice wheels! I've got a Z3 that has the same 3.0i engine and it loves the RPMs too. A blast on the curves and took it last year to the Tail Of The Dragon and it handled those curves great.

[@scottbrady5127]

Nice score for you on this one Randy. That was an easy fix and with a fender you will have a really nice car. Nothing wrong with that used strut, I would never give what BMW wanted for a strut either.

[@McarthyPlange]

Good job Randy. ..This will be a fun car to drive

[@bradgilpin9740]

Them wheels look awesome! I think the Z4 could be a awesome looking car.

[@chrisosiecki8050]

Randy, please check you furnace intake and exhaust. Can freeze up. I live in Wisconsin, have to check when a big snow and cold snap hits here. Easy to fix, and can cause your issues.

[@45AMT]

Awesome car! Good job getting her back driving again. Happy Birthday tomorrow!

[@AutoAuctionRebuilds]

Thanks man!

[@jamesdonohue9747]

Wheels look perfect .Fit the car nicely.

[@ae4bp]

What a deal! Nice and fun. Good job, Randy.

[@jasoncolcom]

Randy, try using a hydraulic jack on the ramp to lift the hub assembly into place. You have more control when trying to line up the holes on the top of the strut

[@AutoAuctionRebuilds]

Thank you.

[@Kevin-go2dw]

Yep, Jack can be your best friend when needing to lift items.

[@JackWalked]

Cool wheel choice randy! Love the vids man keep it up

[@boris007cd]

Nice Nice WHEELS 👍perfect match check left front brake missing a spring 😊

[@laverdieremath]

I really like the wheels! Congratulations on a great find!

[@beyondrepair8949]

"I just have to reach back here and find the hole. Man I'm flying blind here". How many times have I said that to myself - when working on a car.

[@marketresearchinvestment3142]

Good job Randy, hope you'll find the right spring to make it look better than!!!!

[@michaelhuey4187]

Randy, (1) the new wheels are great ( you will need fix-a-flat though ) (2) definitely PDR the fender if it will cost less than the replacement fender (3) fix the roof so it works right (4) when it is finished, post it on IAA and let us know what you get for it, you should score $6K easily for a 1 owner, low mileage, with the repair history you’ve got on it. This one was a SCORE 👍 PLEASE, STAY SAFE ‼️