3018 PRO - Making a spoilboard

In this episode we create a spoilboard for our 3018Pro complete with slots so we can still use clamps.
Link to the files used and Grahams tutorial - remember you will need to unzip all the files:
1drv.ms/u/s!Au...
List of tools:
Surfacing bit - amzn.to/3syuknD
6.5mm or 1/4" collet insert - amzn.to/3vcjd4W
Collet set (optional) - amzn.to/2PCCKvt
1/8th flat end mill - amzn.to/3cybCH9
V bit - amzn.to/3sz1Biz
Blue tape - amzn.to/3u9UT2R
Starbond - amzn.to/3fpEtze
Direct from Starbond with 10% off, code is Jamesdean10
www.starbond.c...
To become Patreon and help the channel please check out the link below.
/ jamesdeandesigns
If you want to help but do not want to become a Patreon, you con contribute directly:
www.paypal.me/...
Some product links I use are affiliate links. This means they do not cost you any more but I might make a small commission in return which helps towards making these videos.

[@iainrutherford184]

Hopefully this comment will help someone! I've literally spent most of the day trying to create 2 spoilboards for my 3018-pro. Everything seemed to go okay until I started the file to cut the mdf. The bit literally plunged into the workpiece and made a right mess. I checked and rechecked my zero points, I tried using candle rather than ugs. I even spent over 40 minutes on a chat with Amazon raising a complaint about the rogue actions of my machine. Anyway, after almost launching the machine out of the window, I decided to save the spoilboard file to my desktop, rather than it opening via OneDrive. Bingo! Worked first time and really pleased with the results. There are literally so many things that I researched to troubleshoot the problem... seems like it was staring me in the face! Huge thanks to James and Graham for doing the hardest part of the work. I really appreciate your time, advice and support.

[@JamesDeanDesigns]

😲 I've never heard of that before. I'll pin this to the top and add a note in the description area. Glad you got it sorted

[@iainrutherford184]

It's the only thing I can put it down to. Stupidity was my number one suspect, but I've researched so much stuff and just considered the machine (psu/control board) to be the problem. The program has been faultless since...although the damage to the bed was already done #muppet

[@phil2082]

​@@iainrutherford184 The damage to the bed is proof that you are learning. Don't worry about it! The machine Shop I am about to be in charge of has this on 9 out of 10 vises. Most just soft jaws, but the hard jaws (for those that still have them) and the vises themselves! Face the aluminum if there's a burr and, most importantly, keep going!

[@user-zc6dh8vd9u]

I’m having real issues with the facing software seemingly stopping and dropping 2mm deep circles right in the middle of the wasteboard

[@ganoesworkshop6514]

James, I didmine like this, but I did the grid lines first, then gave them a quick painting with some spray paint, THEN did the surfacing. It left me with some really easy to see lines. Thanks for the great video!

[@JamesDeanDesigns]

Thats a cool idea 👍

[@Zarundo]

I was thinking the same, rearange the order. Do the engraving first. The paint was a really smart move. Your comment sould be pinned at the top. ;)

[@kr15uk]

Oh mate, these videos are exactly what I’m after, been doing 3d printing since early repraps aka 2012ish so I’m ok with the machines but cnc always seemed different world, haven’t touched my 3018pro since I got it almost 2years ago and decided to finally dive in… these videos are making big difference to my cnc journey for sure, big thanks

[@JamesDeanDesigns]

Was a bit like me when I got into 3D printing. In my head they should have been fairly similar but took me ages to get into it then one day it just kind of all made sense - although I'm still a novice at that :)

[@matthewelyash6538]

you sound like me! again, these are great easy to follow clear and informative. keep it bup,

[@BillYovino]

I was able to use your files for creating the spoilboards for my FoxAlien 3018 V2, by detaching the rear panel of the enclosure. I had to create my own gcode file for surfacing the board because of the limit switches, but I did use your technique. Excellent video, thank you.

[@JamesDeanDesigns]

Excellent. Glad you were able to use them on that machine 👍

[@beakytwitch7905]

Goodness you have taken a lot of care to make both Vids and downloadable work files. Thank you for your efforts ! 😊❤

[@stevenpoe1440]

Awesome tutorial. My spoil board came out beautifully thanks to you and Graham 👍🙏

[@thomasm964]

You should make a video about adding limit switches to this machine! Love your videos just earned a sub.

[@peterg3021]

Really appreciate these tips. I just bought my 3018Pro and I'm looking forward to getting the most out of it with carvings

[@JamesDeanDesigns]

Excellent. Hope you enjoy it

[@SciHeartJourney]

Thank you for making this video. I've always used a piece of MDF as spoiler board, but I never surfaced it. I'm hoping this solves a lot of problems. That grid and the laser etching add that professional touch that is very admirable!

[@JamesDeanDesigns]

Thank you very much

[@user-uk3pb6vl2g]

Great job explaining in detail, step by step. video like this has helped alot

[@adencitydiy73]

I'v got what I want from this episode ..thank you James

[@nannerpuss9430]

Nice video! Quick thing though: instead of putting yourself through the tedium of manually aligning the stock with those drawn lines each cycle, you could fit index pins or a quick little jig into the t-slots. Therefore, when you do a flip, you just butt the board up against those posts and clamp it down, and it's perfectly aligned, no hassle! :D

[@JamesDeanDesigns]

That is good advice. I do have a few jigs for things like that, however generally speaking I like to leave the bed completely open for the videos so users can use all the space as everyone has different requirements.

[@bileec]

i just made this and it worked perfectly. my confidence is restored!!! Thanks James. please keep the videos coming.

[@simcoeskies2659]

Just a comment to help others, as David Mochen recently mentioned, the current G-code seems devoid of anything that would drop the bit below the surface of the board. I realized this after running the code a couple of times. Therefore, current best practice might be to find the highest corner, loosen the bit to let it drop down and sit on the surface, tighten it up, then jog it up 5mm, go to the LOWEST corner, drop it down 5.2mm (0.2mm below the HIGHEST point on the board) and REset Z=0. Then raise it back up again, and jog to the starting position (and set XY=0 if you have not already done that). Run will then take 0.2mm off the highest parts of the board. Go back home, drop 0.2mm, RESET Z=0 and then run again. Rinse, repeat.

[@ckworton]

Excellent. Thank you. These videos are golden.

[@JamesDeanDesigns]

You're very welcome!

[@Rhin0Neil]

Thankyou.. This was a great help.. I also highlighted the grid with a 0.5mm pencil in the slots.

[@JamesDeanDesigns]

Nice work!

[@Opa10]

Great jobb done explaining in detail, step by step. Was waiting for a video like this.

[@lenzieramproductions]

Got a 3018 pro for Christmas, and this video (and your others) have been a fantastic help with getting started. Need to watch your videos about the laser engraving module now!

[@JamesDeanDesigns]

Welcome to CNC :)

[@MacBaerFFM]

Thank you so much, that was the video I'm waiting for. However, got to cope with my 3018 pro shaking the Z bearings loose when milling, tried to glue fixing them. Then rush on over to the next home improvement store to shop some MDF. And catch up with your 4030 genmitsu Prover videos ... a machine that I feel a slight desire for... :-)

[@mrteatime4116]

I love that smooth Intro and Outro

[@JamesDeanDesigns]

Thank you

[@onemillbill2916]

Absolutely brilliant buddy! 👍🏻

[@JamesDeanDesigns]

Thank you! Cheers!

[@MStoica]

Thank you so much! I can’t believe this, this video helped me find out something that I really needed and thought it wouldn’t be possible and almost planned on selling my 3018 pro. Thats the fact you can have different collet sizes. I needed to carve 3” 1/4 deep, but the bits that came with my cnc aren’t long enough, so I kept looking for longer bits (of the same diameter, for the collet the machine has by default - 3mm - which is very thin) and of course I couldn’t find any long enough. But now, seeing that you can actually get different collets, this should solve my problem. I just hope the spindle motor is up for the job, and that’s not the reason they didn’t provide collets for thicker bits out of the box with the machine.

[@warrenking1815]

Thank you James, this video was clear and concise. I have a 3018 and wish to make a spoilboard. You video showed me how and the link to the files also was a great help. Again thank you!

[@JamesDeanDesigns]

Glad it helped 😁

Very cool advice and easy to follow, thanks

[@richardbierton6062]

Hello James I found your tutorials yesterday. I am expecting delivery of my 3018 prov today. The way you deliver the instruction is top notch and I feel I am learning a great deal already. Keep up the good work.

[@ttfranks952]

Thank You James. This is a great idea . I'm going to have to try it.

[@frankskerlan554]

Thanks James. Great video. Cheers

[@havelockvetinari9395]

Thanks James, I appreciate this. I know my bed is not level so I definitely need a spoilboard and I don't want to buy one. I need to get a facing bit and 6mm collet first.

[@JamesDeanDesigns]

Well worth the investment to buy them

[@havelockvetinari9395]

Hi James I am sure it is but I am not planning to keep the 3018 PROVer in it's current form for long as I intend to upgrade it with the extension so I will need the bigger spoilboard when I do that. So for now I'll use your excellent tutorial and make one. Thanks again.

[@flypic1098]

I didn't have 6mm MDF. Only 19mm. It's much too thick so I'll keep my eyes open for a bit of 6mm. I ordered a 25mm bit last week so when it arrives I'll be ready. Thanks for another great tutorial. Jim

[@MrReymagic]

Complimenti ! Tutorial davvero esaustivo e ben fatto. Grazie infinite

[@JamesDeanDesigns]

grazie :)

[@georgehowell9307]

Really, really good videos, clear and concise, thanks buddy!

[@JamesDeanDesigns]

Thank you very much 🙏

[@kamilpadula7152]

thank you m8 for tutorial its very handy and its help me a lot

[@klave8511]

Great video James, all the information clearly articulated, thanks.

[@JamesDeanDesigns]

Thank you 👍

[@TheMachineShopUK]

The surfacing bit in your kit list has a 1/2" shank

[@Naturemannz]

thanks for being metric. So sick of hearing inches gibberish. Love from NZ

[@Fureoz]

You probably could have added another 2 layers of tape to the right side to take out the .2mm difference painters tape is about 0.1mm thick. Not that it matters but for people who have a bigger difference. Extra tape instead of ordering tiny washers could do the trick

[@davidhawley1132]

I've found that when using tape on just certain areas, the unsupported areas can sag under cutting forces.

[@pvtfbomb2327]

One trick for alignment would be to use t nuts and bolts in 2-4 locations this would set dead stops

[@jorgeacosta1198]

exelentes explicaciones aunque las tengo que leer por que no se ingles pero me gustan mucho y me son muy utiles ya que soy principiante en esto de la cnc gracias por tu trabajo exito y salud

[@martinpower61]

Loving all this content! I just purchased a 3018 and watching everything before I even turn it on :) One question - when doing the grid, are there any issues using the lazer instead of the spindle?

[@007jojoo]

Thank you

[@JamesDeanDesigns]

glad it helped :)

[@petewadner3568]

When setting the Z zero, when down to within 1mm why not use feeler gauges to check the exact distance of the 1mm. I think this will be more accurate, save time and less chance of going to deep. Feel free to contradict me, I am new to this. Thanks for producing such a helpful video that even an old man can understand.

[@JamesDeanDesigns]

Hi Pete, there are various methods and feeler gauges are one but not many people have them. The better method is to use a zprobe which I do run through in other videos but with so much to do in one video, trying to add in another section about setting up and using a zprobe can be a bit overkill.

[@cpowerdesign]

I know this comment is late, but wouldn't it be a good idea to use blocks bolted to the bed to be more precise when having to flip and turn the pieces around? A simple 3d printed block would help achieve this. It would be consistent and make the job go a lot quicker. This is a good video though.

[@miamibeachshadow]

I see what you're saying but this project doesn't need a lot of accuracy and making that block on a printer will eat up a lot more time than it would save if only doing one run of the spoilboard.

[@saifdarwish7644]

Good mind 👍 mean ☺️ good job 👍.

[@MarshallMcFarlin]

You could just use release film like you would use for vanilla cutting or applying cut vinyl like with a cricut then spray a bit of 3m spray adhesive to the mdl. then apply it versus taking the chance of the superglue bleeding through to the Aluminum bed thank you for the video unfortunately the link was disabled Please send me a link.

[@AndreasScheucher]

Hi James, Thanks for sharing this introduction video. Very valuable for beginners! After following it and 3D printing some clamps to be mounted on the bed, I realized: the slots are narrower than in the aluminum bed. Hence the clamps won’t fit. I figured out to change the spoilboard‘s slot with in the Fusion 360 file, but have no schorende with the CAM module so far. Is there an easy way to generate the gcode again?

[@clustef33]

Awesome! Thank you so much for having made this video and the downloads! As I have 8mm MDF rather than 6mm, how would I edit the G-code to have a deeper cutting depth? Or what would be the easiest way to create G-code for this thicker material? Cheers!

[@PushkarajBhagwat]

Thanks for the detailed video, James. My 3018 pro is running only because of all the help I get from your videos. I have a question related to motor slippage. My X axis coupler keeps on slipping off the stepper motor shaft-flat-surface. I tried changing the coupler (had an extra one from Sainsmart), greased the lead screw to reduce friction, scrubbed the shaft-flat-surface with sand paper to make it rough... but nothing helped. A few details about my milling efforts... Feed rate

[@JamesDeanDesigns]

If parts are worn then definitely consider getting new ones anyway but the best solution is usually to apply a drop of loctite thread lock to both the little set screw in the coupler and also a drop on the stepper motor shaft. Loctite is a a bit like a soft glue. It helps hold everything but can be undone of needed.

[@PushkarajBhagwat]

@@JamesDeanDesigns Thanks. I'll give it a try.

[@kaloyanivanov4631]

I admire you for these tutorials. Got myself 3018 pro and I have problems here and there, fixed some thanks to you. I just bought a new collet and a new surfacing bit and now im trying to level my spoilboard, but when the spindle starts to spin(just spinning not even drilling) the machine is making so much noise. Any suggestions?

[@JamesDeanDesigns]

Surfacing but can really magnify any vibrations and generally speaking you wouldnt use bits this size on a machine like this (unless surfacing). Also you get different quality of collets and nuts. I remember swapping one of my collet nuts out and it reduced the decibel level by about 8 which is quite a bit

[@JohnColgan.]

When I cut my board, I gave extra inch X & Y. This allows me to fix front ,& optionally side rails for alignment without losing any cutting area. The guide rails lightly bevelled on inner face to aid clamping by wedging from rear clamps. Why do you say surface bit should be 20mm minimum? 20mm is a bit too heavy duty for a 3018 standard spindle & can cause chatter!

[@JamesDeanDesigns]

I dont say 20mm minimum, I say 13mm minimum, however I use a 20mm. Its the same bit I used when I did my first spoilboard with the standard spindle. You are right, its quite a heavy bit for this but its a light slow pass so there was no chatter

[@JohnColgan.]

Sorry, grey matter misheard !

[@JamesDeanDesigns]

@@JohnColgan. its ok, very valid point. I wouldn't normally run a bit that big

[@jongrace9133]

Everything was going great up to the point where it started making the first cut and error it hit the y axis limit switch, how do I correct it?

[@user-zk1op7tx1z]

Thanks for the great videos. I just got my 3018 pro (Rattmotor). I loaded the slot file and set all the settings as you did in the video. When i ran the operation, it did the first cut over and over and would not do the other three cuts. what am i doing wrong? I'm not sure whether i missed something in the set up of the machine. I tried in bot UGS and Candle with the same results.

[@ludokustermans]

Hi, tried the board on my CNC3018 PROver 2, but I always have some limit switches to activate. Any suggestions on how to flatten the whole 300x180mm ?

[@steveng5565]

I'm going to try again but thought I'd mention an issue I ran into. When I ran the slot cutting file my first pass on the first slot started at the edge of the board as expected. However, each subsequent pass stopped roughly an inch short of the edge of the board. I stopped the job after the first slot had apparently finished. It's as if my entire board shifted an inch between the first pass and the rest of the program or the machine suddenly recalculated my zero point. As I said, I'll try again and see what happens.

[@davidhawley1132]

I'd presume you can use a G38.2 (probe) to check for flatness: do that on your reference corner, make that Z=0, and then do a G38.2 probe on the other corners and read off the Z.

[@user-nh8bo2hq7p]

Need some help… I have the 3018 prover V1. When I run the surfacing file with the 25mm cutter, it will cut a little and then start oscillating wildly- gouging circles in my mdf spoil board. I reduced cut depth from .2 to .1 mm and the same thing happens. Feed is 200mm. I followed the specs from Graham’s directions, so any help is appreciated. Thanks, David

[@jorgeacosta1198]

hola de nuevo podrias hacer un video de que hay que hacer cuando estas mecanizando y se produce un corte de energia o simplemente quieres terminar el trabajo al dia siguiente gracias saludos exito y salud

[@DC-1226]

Why don't you use a test indicator when checking your bed? You can zero in one corner. And there's 2 options after that. Either drag the indicator to each corner while watching the travel. Or bring it back to zero in each corner and watch your work coordinate Z. That will tell you the difference very very accurately. And it's much safer for an inexperienced operator. I've been a CNC machinist for many years. And this is by far the easiest method.

[@JamesDeanDesigns]

Because your average user buying a machine like this is not going to have a test indicator unfortunately. I do agree they are more accurate

[@DC-1226]

I suppose you are correct. I think it's awesome you reply to almost every post. I've been a metal cutting CNC machinist for around 12 years now. I even worked my way into a process engineer position without any college. I learned it all on the floor and was sent to St. Louis for Mastercam training. So I had 2 questions. Number 1, can Mastercam work for these machines? The 3D modeling in Mastercam and solid works is very very good. And second question is. I've currently got a masuter 4040. But I wanted to upgrade to a Vasto XL. Have you ever used the foxalien vasto series? I was very interested in the ball screw system. Not to mention the much larger bed, and powerful motors. Plus the ability to use much bigger spindles and routers. The price point is fairly high. But it seems to be a pretty solid piece of machinery. So i was just wondering if you had any experience with it? Or is there a better suggestion around the 3k USD price range? Thanks for your videos by the way. Even with all the experience I have over the years. These small machines and tools are a very different animal!

[@edcbabc]

Useful video. One thing I wonder is how easy it is to remove the spoilboard from the bed when you want to discard it? I know painters tape is fairly easy to peel off usually, but with such a large area, and something quite rigid so lifting a corner to 'peel' it is tricky, it looks a though it could be trickier than expected. Any tricks?

[@JamesDeanDesigns]

If its difficult to get off then that means it has been done correctly :) but when you do need to take it off simply slide a paint scraper in-between the spoil board and bed, then slowly prise it up. Make take a little pressure but does eventually lift off.

[@andrewgoodall2183]

The cut slots file is at the wrong thickness for the board I'm using. I can't figure out how to edit an NC file. This is a problem for a newbie.

[@ghostrc4]

When I run this it shows long ways and wants to cut on the long side, how do I get this to cut on the short side so it is correct? I ran this code after the first cut it plunges all the way into the wood. Not having any success with this at all.

[@user-ze4jw9wb8q]

I put my 3018 pro together and it switcher on ok. I hooked it to my computer and nothing. Help please. it does look good though, but I want to use it.

[@widdowsona]

Hi James, thanks for sharing fantastic tutorials. I'm new to CNC and am having problems surfacing the spoil board. I have a CNC 3018 with limit switches. All Axis's are moving in the correct direction, when homing. When I try to run the surfacing G-code, in UGS, the Y axis moves in the wrong direction. Any help would be most appreciated. Thank you.

[@jongrace9133]

Really interested video, I have a question, my machine is a 3018 Prover with a ketch. I have extended the work bed on the Y-axis so that changed the $131 value to 315. I’m assuming that I need to cut two boards to use as one set. Is that correct? The thing that confuses me when I go to surface the board, I think I need to change the surface file to account for the larger bed, right. How?

[@ajaybnl]

Can someone suggest me some endmills or router bits used for 3018? I am having a hard time finding them.

[@BrunoFrei-ew7nv]

Ich habe alles eigerichtet und der erste durchgang war Perfekt. Beim zweiten durchgang hat die Fräse bei dem dritten ausschnitt angehalten. Ich habe diesen Durchgang noch 2 x wiederholt, mit dem selben ergebniss. fehlermeldung: die Maschiene hat Probleme mit dem Programm. Schade

[@chrishartman1933]

Hi James, thanks for your tutorials. I had great success using them, until I tried the laser on my 3018!!! Now, for some reason my design goes 90deg to the work piece. I have spent days now trying to correct it but with no luck. Any ideas you could cast my way, would be much appreciated. Thanks Chris

[@michellestapleton1632]

Hi James we have this machine we watched the 1st one when you made baxters sign, we have got a dolls furniture pattern to make, have you made a video explaining how we start the project and get the g code thank you

[@jamesboyette2347]

Thank you for all of the wonderful videos - I just finished cutting the slots for the spoilboards - but I s have a problem - the slots are not wide enough for the bolts to slid - - I used a 1/8 inch flat end mill - - I dont see anywhere which bit I should use - - any help?? thank you

[@ianknight2053]

Excellent again James. Many thanks. Just one question, is your surfacing bit flat on the bottom? I bought a Chinese offering, which is similar to yours but the cutting blades have a slight angle upwards towards the outside? I don’t know if this is intended or just a poor bit.

[@JamesDeanDesigns]

Thak you 👍 I'll have to double check tomorrow but I thought it was flat

[@richardtbc]

I could be wrong but, the collet link is for a 2.5 and won’t work with the flattening bit you show. Or, I was sent the incorrect collet.

[@JamesDeanDesigns]

You are correct. It appears the 6.5mm has sold out so it's just defaulted to another one which is frustrating. I'll have to get the link updated.

[@richardtbc]

@@JamesDeanDesigns will the 6.5 work with the std nut for the spindle?

[@davidhurst4551]

Great video thank you been trying to make spoilboard for 3018pro using code provided by yourself but for some reason unable to get cuts in right place am a total. Newbie any suggestions to help me get it right would be really appreciated

[@DutchyOutdoorCookingBBQ]

Hi James, great videos, especially for those of use just starting out. Is just me? I have unzipped files for this project, but can not see the g-code only the Set Up HTML?

[@vk2let]

G'Day James, great video as always, what are the chances of you doing a video on the various router bits that you use and what are available for different materials?

[@JamesDeanDesigns]

I have already started filming it. I was planning to get it out this weekend but have a had a few days away so are not sure that will happen. But definitely out by next weekend

[@JoseGomez-vl3gg]

Hi James, Very nice Video. I tryed to make the spoilerboard but always when the 3018 Pro makes the first 3 Cuts and they want to go to the fourth they stop. Have you any idea what happens ? Thanks José

[@robertdiehl1976]

James Thanks for the video. I have a question when facing the boards. Is there a way to adjust the program file to surface the entire bed if I have the bed extension on my 3018 pro?

[@xxdibxx]

Mr Dean, Is there an advantage to using MDF over another material? I would think something like a piece of 1/4 baltic birch or even acrylic would be a viable option. For me, I live in a very humid state ( Washington) and MDF tends to draw moisture and warp or bubble. Also, is it worth attempting to micro-level the bed before using a new machine or is "close enough" good and just level the spoilboard? Thank you for the videos, I would like to see one on drawing a project from scratch. I am REALLY new to 3 axis routing and I have found ( so far) that you seem to have more impartible knowledge than many.

[@JamesDeanDesigns]

Thank you. Definitely worth getting everything as level as you can before starting as it saves you time when surfacing. MDF is cheap, soft and doesnt splinter which is why it works quite well but you can use other material. Just be careful with ply as that can occasionally have voids in ply when you take the top surface off. There is an MDF call MR MDF (Moisture Resistant) and this is better for more humid zones.

[@Roy_Tellason]

@@JamesDeanDesigns Or you could just paint or otherwise finish it...

[@JamesDeanDesigns]

@@Roy_Tellason a spoilboard is designed to be ruined essentially though so to some degree a waste of time painting it because as soon as you start cutting into it then the moisture can get again. It's one of the main advantages to MR MDF

[@Volt64bolt]

26:45 draw a grid with a sharpie or something on the board so you can see where it hasn’t cut if it misses a spot

[@JamesDeanDesigns]

Yes its something I forgot to add to this video. In my latest spoilboard video for the 4040-XE I scribble all over the board with a pencil. Good tip 👍

[@Berghiker]

Are you using Tungsten Carbide 2 Flutes Ball Nose End Mills to drill the holes in the PCB?

[@davidkelly1946]

Hi James, Running your spoilboard file as my first project, the router heads off to the far corner to start work! I'm using Easel (UGS won't download) Is there something I should look at?

[@bileec]

Can you help me set it up correctly?

[@TechGuyNelly]

My nuts that came with my CNC don't fit them slots after all that massive pain in the butt. I have used the 3.175mm bits that came with the machine so maybe because they are small maybe I don't know.

[@kaloyanivanov4631]

Hey 👋 I have the 3018Pro, works fine and i just did the spoilboard. Thanks for all the informative videos and for the designs. But my machine is making too much noise when cutting( yours is a lot quieter). Do you have any tips or suggestions? Tysm!

[@JamesDeanDesigns]

My videos probably do not portray the true noise as they can be quite loud. Make sure all the lead screws are clean and lubricated. Shallower passes usually makes less noise. Enclosure certainly helps. Some people used to say clamping the machine down also helped minimise noise

[@kate7580]

Hi James, Not a big deal but the link to the surfacing bit shows unavailable on amazon. May want to update it so you can keep everything flowing.

[@JamesDeanDesigns]

Thank you. I'll check it out and update

[@brucenorton3864]

Hi James, How long will the spoiler board stay securely attached to to the bed using the painters tape and glue method of adhesion? I normally secure my jobs down with double sided tape. I'm worried that when I remove my work piece the spoiler board will be dislodged.

[@JamesDeanDesigns]

Mine stayed down for years. When you come to remove your work piece, use something like a paint scraper to prise it off so the pressure is lifting the workpiece and not the spoilboard

[@brucenorton3864]

@@JamesDeanDesigns Hi James, thanks for your reply and comments. I cannot advance the bed of my machine far enough to overhang the front face of bed, before I run out of Y axis travel. The center line of the spindle is about 15mm back from the front face of the bed. Have I got the bearings of the bed attached incorrectly?

[@evovanner]

Does the masking tape have to be blue can I use normal white tape do ?

[@JamesDeanDesigns]

Normal masking tape should work, I think the blue stuff just has less chance of the glue soaking through it I believe

[@jakubpiatka5765]

Why not making grid with laser instead of V bit?

[@JamesDeanDesigns]

Its an option but not everyone has a laser

[@youmbgtube]

JDD - thanks for all the great videos! I'm a new owner of a 3018-PROver V2 and have a couple of questions: 1) If you make projects that require you to cut through the material (like Christmas ornaments) wouldn't it be best to make one spoilboard that is surfaced to the bed and then have a second constant thickness spoilboard on top of the surfaced one? This way you only need to surface one spoilboard and can just easily replace the constant thickness spoilboard as the old one wears out? 2) I see you used tape and CA glue to hold the spoilboard to the aluminum bed. Does this hold it well or is it better to mechanically attach it somehow? 3) My V2 has an aluminum plate for a bed. It has many threaded holes for hold downs. Don't know if this is better or worse than the V1 aluminum extrusion. But, for the V2 design I'm thinking you would drill clearance holes above the threaded holes in the bed plate instead of slots? (I'm thinking of doing this with my drill press since I don't yet know how to generate my own code.) Thanks - Mike

[@JamesDeanDesigns]

Glad they are helping 👍 1 - this assumes the material you're using for the top board is perfectly flat and consistent. Sadly material rarely is which is why its always best to work from a freshly surfaced area 2 - blue tape and CA glue works really well as long as your surface is clean 3 - yes, if ot has holes then you can either drill them or just use your CNC to machine the holes. I have some other spoilboard videos that do holes instead of slots

[@youmbgtube]

@@JamesDeanDesigns thanks for the quick response. One more question. For projects requiring you to cut through the material do you just cut into the nice spoilboard or put something in between?

[@JamesDeanDesigns]

@@youmbgtube spoilboard is there to be destroyed basically so cut straight into it 👍

[@youmbgtube]

@@JamesDeanDesigns Thanks! Let the fun begin. Hate to keep piling on with questions but I purchased 1/4" MDF like you used. 1/2" is easier to find plus many others use it for their spoilboards. Any reason you use 1/4"? I can see the 1/4" being more compliant with the aluminum bed and minimizes "Z" height loss but are there other reasons to use 1/4"?

[@janspoelstra8309]

Hi James, with adding end switches, the wiring tends to become messy. Can I add a cable drag chain, like you have on your (bigger) machines? If so, which interior width should I order?

[@JamesDeanDesigns]

Yes you can. There isn't much wiring so it can be a fairly thin chain if needed

[@janspoelstra8309]

@@JamesDeanDesigns Thank you, I'll look into it, seems some wire extension soldering is in my future...

[@TheEroxion]

James, Great video again. What SW do you recommend to make Gcode toolpaths for the 3018 from .stl files ?

[@JamesDeanDesigns]

If your familiar with STL files then possibly Fusion 360, its serious powerful and free for personal use

[@danielkellogg3207]

Hi James I haven't found the link for the 3018 pro spoil board. Could you post a link. Thanks for all the great videos.

[@JamesDeanDesigns]

Hi Daniel, it's literally the first link in the description below the video. There is usually a little arrow to expand the description area and you'll see all the information

[@user-zc6dh8vd9u]

Not sure where I am going wrong But digging circles in centre of spoilboard

[@JamesDeanDesigns]

Is that when doing the surfacing. Possibly starting a little too low. Raise it up a bit and set the zero a fraction higher

[@user-zc6dh8vd9u]

@@JamesDeanDesigns thanks James, yes it’s when running the surfacing code, I have run it twice and the same thing happens. I will try what you suggest tonight and set the z a little higher. I emailed you a photo of the board, as I was beginning to think the code may have been sabotaged

[@JamesDeanDesigns]

@@user-zc6dh8vd9u have just taken a look. I suspect its just cutting too deep. It's only meant to be skimming the surface. You may just have to run it a couple of times to get rid of those marks

[@user-zc6dh8vd9u]

@@JamesDeanDesigns thanks for taking the time to look, I will definitely do as you suggest and let you know how it goes

[@jimscott7596]

Hi James, Great tutorial. I would like to make a spoilboard, but have a problem with my bed. The spindle will not reach all four corners. I have tried numerous things to correct this but without success. Can you give me any information as to how I can remedy this. Many Thanks Jim

[@JamesDeanDesigns]

Do you have a Pro or Prover? Is there anything physically stopping it travelling edge to edge or is it the files in my video do not go edge to edge?

[@jimscott7596]

Hi James, Thank you for your reply. My machine is a Pro and I have been a bit of a plank (I should have spotted it sooner), I found the answer to my question in another of your videos (The 3018 build). I found that you set the gantry 48mm from the back of the bed frame. I had purchased my 3018 from a friend and the gantry had been set flush with the rear of the bed frame. Now set in the correct position and all is well..👍

[@JamesDeanDesigns]

@@jimscott7596 excellent, glad you figured it out 👍

[@reddog907]

I went to the link and the zip file I get is only for the Laser Grbl , is the link wrong or am I missing something ?

[@tvcinema8048]

Hi, do you have a design for genmitsu 3020 max pro spoilboard or GCODE? Thanks!

[@Berghiker]

I want to make accurate PCB's with perfect aligning holes. Not sure if an end ball mill or flat end mill is better for drilling 0.8mm holes.

[@stephenkoebel3923]

Sain Smart publishes a nice infographic showing what their various bits are good for

[@meithkart]

Hi. Just found your excellent videos, I have just purchased a 3018 pro. Your link to graham's tutorial isn't working

[@JamesDeanDesigns]

Hi, I have just tested it and it is still working. Not sure why it didn't work when you tried it but it seems ok now.

[@garyr7415]

What were your feeds and speeds for the surface bit? I tried to surface a piece of pine and it grabs and digs in. make a big bang and shakes the whole machine!!!

[@JamesDeanDesigns]

I'm not at my computer but if you open the surfacing file in something like notepad you'll see a reference in one of the first 5 or 10 lines like f200, that is the feed rate

[@Joshua-ju5uc]

What kind of program would you recommend to cut the board. I'm more familiar with Easel but I don't pay the 24 dollars a month for the pro version

[@JamesDeanDesigns]

In my opinion the $24 a month is a bit of a rip-off. I love the fact it is simple but in terms of what they offer, Easel is very much behind the market. In this video I discuss software. Ultimately I use Carveco Maker as its only $15 a month and has loads of tools. In the video description there is a link for a 90 day trial and a discount code. kzbin.info/www/bejne/e36samqImMdjmLM

[@upper_deck]

Hi James, how easy is it to removed spoiler board? Do you have a special technic?

[@JamesDeanDesigns]

If you've applied it with blur tape and CA glue, then just use something thin and flat like a scrapper, push it inbetween the spoilboard and bed, then slowly prise it up.

[@upper_deck]

@@JamesDeanDesigns Thanks for your quick answer. Have you tried also tried double-sided tape? Why not use this one?

[@davidboyd3373]

Hi Thanks for your vids they are a great help to me as a newbie. when I am trying to cut the slots in the spoil board the machine seems to want to cut the slots from the back of the machine and not from the front as in the video. Must be doing something wrong but dont know what. any help would be good.

[@JamesDeanDesigns]

Does everything else run the correct way? There is often confusion with the 3018 because the bed moves instead of the gantry so when you press forward in Candle/UGS, the bed should actually move towards you (backwards) if that makes sense

[@davidboyd3373]

@@JamesDeanDesigns I reversed the Y axis and this solved the issue Thanks for replying.