3018 PRO - Tips and tricks

[@smoll.miniatures]

I love KZbin and its creators so much. The fact I had no idea about cnc routing yesterday, and today after watching 100 vids I have the confidence to buy one and run it is absolutely magical. I swear I’ve learned more this year from KZbin than I did my whole time at school.

[@REDBULLHEADiphone]

Skipped to the part about holding material to the bed. Drove straight to Screfix, picked up some CA glue and masking tape and it worked a charm. I now have a 300x200mm piece of material on the bed, fixed and sturdy with no clamps!

[@JamesDeanDesigns]

Excellent 👍

[@alexdalton5963]

I have just received this machine from amazon . Had a issue on y axis assembly every time I secured the hex bolts it did not slide. discovered the table (aluminum) was curved after much fiddling I have temporary packed with card of various thicknesses as don't have shims stock. Your video on the spoil plate and leveling was very helpful. When my friend who runs a industrial cnc mill get back from leave we will try straighten it. I have now run one of the sample files on the mill and my spindle I am glad to say has almost no vibration. Thanks for the tips as the manual for what it is does not mention maintenance. Although with my friends on it gets cleaned daily and has built in lub pump. I live where items like the tape are not that common so will hunt for alternatives. Thanks for the brilliant tips. (zim)

[@JamesDeanDesigns]

Glad it helped. Instead of blue tape, double sided tape or carpet tape is always an option

[@alexdalton5963]

Double sided tape I can get. My wife uses for some art projects

[@christhompson8003]

As a quick thing to reduce noise early on I've found the foam sheets that come with the cnc machine make a good mat to drown out the noise if you strip the sides and just use the large flat backs.

[@jrvcell]

Bearing Tip! Instead of epoxy, I have had success holding all my bearings in using electronic repair tape. B-7010 is extremely adhesive and thin. I wrapped the bearing with 2 strips of tape and pressed them in. No bearings have shifted since and you'll be able to get them out if they fail. Thanks for the video and I'll be getting some aerosol dry lubricant. Great tips!

[@JamesDeanDesigns]

Not heard of that before but thanks for sharing

[@johnnyonpc6799]

I don't have a CNC machine but I still watched the whole video, even considering getting one! Cheers!

[@JamesDeanDesigns]

You should do. They can be frustrating at times but also a lot of fun

[@dd884e5d8a]

I've come back to this video several times over the past couple of months. It's full of great tips, particularly the painter's tape / cyanoacrylate glue trick. Thank you!

[@JamesDeanDesigns]

Thanks. Glad it helped 👍

[@trevorjay1854]

Brilliant - clear and concise tips that will really improve my machine and the work it produces...what a star

[@JamesDeanDesigns]

Glad it was helpful!

[@geologist_luna]

So I have the same machine and am 3D printing stop switch sensor holders for the X, Y, and Z. I don't know if anyone else will be interested, but I am building them to be as "low pro" as possible, and capable of still keeping as much off the original 300x180 as I can. Great tips, and I will keep up with you a ton now. Thanks for all of this!

[@Ikescreations]

This is so incredibly helpful! I’m going through all your 3018 videos right now and you’ve saved me HOURS of work. Thank you!!

[@JamesDeanDesigns]

Glad it was helpful!

[@jonconnellnyc]

Excellent content and the best I have seen on this clever little machine to date! Very many thanks. Btw, people of the world thats a Birmingham accent - a place in England famous for engineering excellence and where kids grow up naturally knowing how to make things and create loud music for some reason. Good to see a great tradition continuing.

[@JamesDeanDesigns]

Normally I step in here and say no, its a black country accent but I doubt anyone on KZbin would really know the difference 😆

[@jonconnellnyc]

@@JamesDeanDesigns I'm 7500 miles away. That'll do

[@dwainedibbley289]

Getting a 3018 pro for Christmas, loving the guides and cant wait to get started

[@burtrosner6050]

A must watch video for first timers that bought a 3081-Pro

[@JamesDeanDesigns]

Thank you

[@electronron1]

Good tips, thanks. I added homing switches to my 3018 and had one of the cables vibrate out of the connector on the control board, I used hot glue to keep the connectors from coming loose again. The homing switches did allow me to salvage an engraving I was working on, when it finished I realized I should have engraved deeper so I went back to Carbide Create changed the parameters to cut deeper and ran the code again, since the X and Y axis were based off the home position they retraced the original design perfectly.

[@JamesDeanDesigns]

They do have some useful benefits such as being able to return to the exact same spot

[@alecbayliss7569]

this has been the most helpful videos series i have seen thank you James

[@JamesDeanDesigns]

Glad its helped 👍

[@alecbayliss7569]

@@JamesDeanDesigns what is the dust sleeve called on thingiverse

[@jabberdoggy4444]

I have a tiny tip: Instead of furniture pads, I used a flat piece of the packing material my Sainsmart came in and was pretty shocked at how much quieter it got right away. Even so, I'm planning on working on a bolted down solution; my "workbench" situation is not currently ideal.

[@stefangruskovnjak1344]

KOLIKO JE CEA

[@tramutoohana2803]

Thanks for the video. Ran into many of the same problems (bearings under table vibrating out of housing, etc.). Another tip you may offer is leveling the table. While not perfect, I was able to buy some 0.016" metal at my local hardware store and place a shim between the table and the bearing housing underneath. I was able to run a dial indicator across my table and had it within @ 0.010", but for someone without an indicator, you could take a small cut on MDF to see if it's cutting close to flat. Really appreciate your time and effort!

[@JamesDeanDesigns]

Thank you, thats great to hear

[@OGmolton1]

great video, thanks for sharing. I found that with my 3018 pro the steps per axis (in the grbl firmware I guess) had to be set to 800 steps to get millimeter accurate results. I just used a laser engraver to draw a ruler until it lined up with an actual ruler. Also, grow tents make good cheap and easy enclosures

[@gregoryconnors7370]

Excellent info on a rather incapable machine. You've brought things to my attention that I otherwise throw aside and chock up to the inferior build quality of these little things. While I look for more in depth resolutions in re-engineering the machine in it's entirety, you bring about ways of turning the inferiorities into working capabilities with much simpler and more economical solutions. Kudos!

[@bernym4047]

Thanks, very helpful.

[@JamesDeanDesigns]

Glad its helped 👍

[@regularcyclist4852]

I recently purchased a CNC 3018 pro from eBay for under £100 from someone who obviously had never assembled it. It came with the woodpecker board and spiral wrap along with the offline controller. Just finished putting it together and hope to test it out tomorrow.

[@brucenorton3864]

Good morning James, I agree entirely about the comment regarding the noise level between a spindle with a milled shaft vs a round shaft. There is a massive difference. I bought the Hanpose spindle with a solid shaft and 2 bearings, which I think makes the spindle run more smoothly.

[@markhall3323]

Good tips thanks. For me limit switches are very useful for being able to “home’ the machine i.e. let it return to a known starting position in every axis before starting each job it’s a bit like having a a z-probe for all three axes.

[@JamesDeanDesigns]

At the time when starting out I never really needed them, but have to be honest, I use them all the time now.

[@axelSixtySix]

Hi there. I just subscribed to your channel. The two cents of an old CNC user: 1. on the 3018, after all the "upgrades" you made, the remaining vibrations may come from the backlash in the screws (see Openbuilds' anti-backlash nuts), from the bearings (which are wear parts that needs to be replaced along the way. You may not have glued them in place. Shims may make the trick. Find today some replacement carriages as long as the 3018 is still produced. Just an advice.), from the plastic parts, and from the unsupported guides. So you can't eliminate all the vibrations. 2. the furniture pads keeps the vibrations inside the machine, this is not a good idea because you work on noise, not on vibrations that affects the cut quality. There's two ways to damp vibrations. First is mass, because vibration decreases through some dense and massive materials. Second, a trap where vibrations won't be able to propagate. You can fill the aluminum profiles with granite epoxy. Then you want to fix the machine on a heavy base, like a thick metal plate or a heavy concrete tile. You don't want any pad or rubber thing between the machine and its base plate or the vibrations won't propagate. Sand makes a good vibration trap. So you can fill a tray with at least 1" fine sand layer and land your machine and its base over the sand. You can also use the bottom of an enclosure as a tray. 3. dry lubricants works fine with lead-screws, but not as well for guides or ball-screws. The way you do on your guides don't brings any lubricant inside the bearings because there's a sealed joint that won't allow the lubricant to came in. Like any dust or debris by the way. You bring a small amount of lubricant on the guides which is wiped away by the bearings. You really want some lithium grease deep in the bearing balls paths. Pro tip: one linear bearing at a time, block one end with your finger. use a syringe to force lithium grease inside the bearings until the grease fills all the ball paths inside the bearings and squeeze out of the bearing. That's a necessary messy job. Once you bring the bearing over the guide, the excess grease is removed and a fair amount of grease stays in the bearing. That will lubricate the guides at each pass without building some grease outside. You want to do the same way for ball-screws nuts.

[@JamesDeanDesigns]

That's some great advice. Thank you very much. I've not even been doing this a year yet so any knowledge for people more experienced than myself is really appreciated.

[@styletokill]

@@JamesDeanDesigns We can notice that you are not that exerienced yet! And this is a perfect way to learn:) I was just about to comment something similar to Alex. Like Alex said, mass is one of the best and cheapest way of reducing vibrations, especially on a very light machine like this. But most importantly I beleve that you have to know what the machine is good for and its limitations, this is after all sold as an engraver not a router. Nice video, good luck!

[@JamesDeanDesigns]

@@styletokill very true. My first piece of advice to most people who ask is be realistic with expectations of this machine. With that being said it can do quite a bit once you understand it.

[@styletokill]

​@@JamesDeanDesigns Yes. Dont buy the cheapest most generic chinesium endmills. Spend 10 bucks for the propper endmill for the job at hand, world of difference. They come with all the optimal parameters for running in a specific type of material, from that you could calculate what your machin should run at. A propper tool with the propper machine parameters puts very little stress and strain on the machine. You dont want to "grind" away the material, a propper chip is what you are looking for. Makes a world of diffrence.

[@gordroberts53]

Brilliant! My 3018 is together but before it goes to work I'm going to build the enclosure you've designed. This is a great channel, good work! Thanks for sharing, cheers from BC

[@JamesDeanDesigns]

Awesome, thank you!

[@woozleboy]

RE Linear bearings. Instead of epoxy, screw thread lock compound works well and comes in different strengths so you can lock the bearing in place yet still remove it later.

[@dwgustaf]

Just on the topic of the z probe, I also made a manual probe with a LED light, a couple aligator clips, a 9V battery, a 1K Ohm resistor and a L shaped metal bracket. I've been using it to help me set the spindle for the x and y axis for the stock I engrave/cut.

[@MasterThief117]

Absolutely amazing videos. Extremely clear, concise, and highly educational.

[@JamesDeanDesigns]

Thank you very much 😁

[@ruisimoes3638]

i subscribe that!!!

[@jomundell4588]

Thank you so much I seriously couldn’t of built this- and got it to work without your tutorial 😄

[@JamesDeanDesigns]

Glad they helped

[@jasmine2501]

Lol it's nice to know I'm not the only KZbinr whose dog barks when I'm trying to make videos!

[@JamesDeanDesigns]

😆 yes. The amount of takes he has ruined is unbelievable

[@noiamhippyman]

I couldn’t get a 3080 because of scalpers so I just settled with the 3018. It’s pretty neat and I’m finally doing something that isn’t sitting on my computer

[@JamesDeanDesigns]

Good to hear 👍

[@johnrisdall2673]

I have been experimenting with the baking soda and water trick here is what I found - 1tbs to 1 cup warm water mix until disolved then apply 2 - 3 coats with brush let dry, I set power to 20% and speed 18000 on a 2.5w laser, results amazing much darker, and cleaner burn on wood.

[@JPToto]

Just found your channel. Nicely done! I had no idea about the Graham Bland advice. Thanks so much!!! Already putting these settings to work on my 3018.

[@RickDrew]

I just picked one up - I think they watch your videos. Now included is a brush, wire looms, offline controller and improved spindle.

[@JamesDeanDesigns]

Thats good to know :)

[@glenlang6830]

Nice work James. You and Graham Bland have helped tremendously in learning the 3018 CNC.

[@pauloglockshuber6355]

Finally a video that explain clearly and simple and not boring

[@PoorJohnn]

Expecting to receive one for Christmas. Will be back to re watch & check out Brians information.... Thanks

[@MP-mu1kw]

Excellent video! I ordered my 3018 Pro and can't wait to get started and will be using your tips. I am looking to mill and cut/engrave acrylic along with wood and any information on feed rates etc will be most welcome from everyone.

[@rogerlewis9000]

Thanks for all your hard work , you make it easier to understand and now its not so daunting.

[@jeremyporterfield1611]

James, thank you so much for this video. My machine delivers today, and I'm really looking forward to having something at home to tinker with, even if it's not quite the same as the bigger machines I've used in the past. Regarding limit switches, I do think there is a way to avoid losing bed travel - simply attach an offset in each direction that doesn't interfere with the travel and use that to register on the limit switches. This would allow you to basically max out (maybe missing a mm or so on each side for "safety factor") the travel in each direction. Not having the machine in my possession yet, this may not be possible on every axis, but theoretically it should work, and it's how higher end machines I've used before are set up.

[@izzymola6038]

Hey! do you know where i can get limit switches for 3018 pro? I can't find them anywhere.

[@onlooker251]

Hi James - I've just bought a CNC3018 Pro for a learning project during the lockdown as an entry into CNC with a view to converting what I learn onto a small milling machine for model engineering purposes. I very much like your approach to explaining things. One of the problems that I have is finding an easy way to convert 2D drawings into G code. I've been trying out various converters such as Carbide Create, Candle and different hardware manipulation programs. Currently, I'm using CNC3D Commander for the hardware control. I've been teaching myself Fusion360 but I'm finding this hard going. I'm hoping things will eventually drop into place - it's just familiarisation and perseverance! Thanks for sharing your activities - It's a valuable source of knowledge for us who are starting out.

[@JamesDeanDesigns]

Fusion is great but if its just 2D work then might be overkill as its extremely powerful. Most people start out with Easel or Carbide Create. Carveco is also getting more popular but that is paid for

[@johnr8676]

Good video James. Just what is needed for a newbie like myself

[@jabberdoggy4444]

Incredibly helpful video. I was definitely not understanding how to use the clamps that came with my Sainsmart at all! Lots of great info here, thanks!

[@jkcustomtack]

Happy 2024! Love your videos they’ve helped me so much so far!

[@mikeygee4564]

Great video. The introduction and link to Graham's guides alone are invaluable to this newb. Thank you!

[@Ale-bj7nd]

For the noise and dust, I have built an enclosure with 10mm wood and 20mm insulation foam. Reduces the noise in half.

[@JamesDeanDesigns]

Enclosures make a big difference

[@michaelmitchell6898]

I am running the 64 bit version. I am thinking of putting a ferrite ring on each stepper cable Looped twice through each if my cables are long enough. I got this for model building I have had the machine for two years. Lots of problems with control boards. Decided to build a large machine48" x 48" using a dead table saw as the base and belt driven. great videos!!

[@JamesDeanDesigns]

If the program is not responding its likely to be the PC or software. Out of curiosity just try the 32 bit version. Something is glitchy about the 64bit. My machine is 64bit and I can't even get the 64bit version to open

[@michaelmitchell6898]

@@JamesDeanDesigns I will try and then let you know.

[@michaelmitchell6898]

@@JamesDeanDesigns Loaded 32 bit version. The machine seems more reliable. I was almost ready to dump this project but you saved it! One more question. Can you recommend free software to generate Gcode from DXF files. I have fusion but it changes the size of the part when I import DXF and its very complicated. It would be nice if you could show how to generate and run 3D files.

[@JamesDeanDesigns]

@@michaelmitchell6898 I believe Carbide Create can import DXF files, however I cant personally comment on how well it handles them as I've not tested it.

[@michaelmitchell6898]

@@JamesDeanDesigns Yes Carbide Create does import DXF files. Thanks

[@theDBSworkshop]

I love your videos thanks for the info & taking the time to make a video for us, although i am at the stage where i am happyish with my machine and watched a lot of videos & read articles before parting with cash. I wish i came across your content before i purchased. As i am still learning an awful lot after only producing 3 different projects.

[@JamesDeanDesigns]

I kept messing about making little projects to keep learning. It took about 5 months before I actually made something useful that I sold. Just keep chipping away and you will get there

[@robertsparks3685]

A great video. Just what I was looking for. The Richard Bland link is excellent.

[@ralfgerlich]

Your videos are so helpful, and I very much dig the unagitated and friendly style that you present the information in! Thank you very much!

[@craigmonteforte1478]

Years ago i got into Remote Controloffroad Electric Cars and some Electric Boats the Spindle motors you Zoomed in on in this Video looked very similiar to the ones those Vehicles used ? i do want to note that i was a Adult and the ones i had were not Toys they were actually considered to be on a Hobby level and i spent a great deal of money Upgrading the majority of the Components to build a very Competitive Car back then the more powerful and faster motor was known as a 540 and they ran powered by a 7,2 Volt Rechargeable Battery made up by wiring several 1,2 Volt CylidralBatteries together in a Pack

[@wildwindguitars]

What a great site and always full of information I can use and presented professionally and logically. Thank you so much.

[@JamesDeanDesigns]

Thank you 👍

[@jimbobuilds]

Great video! I was interested in the perfect height setting but what do the wires connect to? Wasn't sure if I missed something but don't think it was mentioned

[@skulls2802]

Nice video and very well explained. I actually reversed some of the bed clamps that attach the aluminium profile to the rails and gained around 40mm in X axis and 20mm. Ive been cutting aluminium and carbon fibre sheets for a while now. I however use rather expensive bits and use them in various forms. My 1300*900 should be here in jan ;)

[@therealjr]

This was great, my machine arrives in a few days and I feel way more confident about achieving a good setup, thank you!

[@JamesDeanDesigns]

Good to hear 👍

[@mechaform]

Enjoying your vids. Good content for the newbie 3018 owner. Hope to have mine assembled soon. One thing - those are carriage bolts not coach bolts; very different in features.

[@JamesDeanDesigns]

Thank you. Might be a country difference, if I Google coach bolts nearly all the results are what I use in the video. Coach screws in the UK are potentially what you know as coach bolts, bolt head and quite a corse thread into a point?

[@mechaform]

@@JamesDeanDesigns ah the old “screw vs bolt” thing again. You’d think we’d have this sorted by now. Fair point. Here, carriage bolts have fine threads and a domed head with a square shank under it to prevent rotation once pulled up in the joint via a nut, and coach bolts are coarsely threaded to a point with a square or hex head that a wrench/spanner can turn.

[@JamesDeanDesigns]

Main thing is that even with my accent, you understand what I am on about 😆

[@mechaform]

@@JamesDeanDesigns I grew up and (fell in love with) Britcoms, TV series, and movies from the UK. You sound “completely normal” to me.

[@Naturemannz]

Thankyou so much very helpful, really appreciate you. I have bought one of these, as i want to go bigger, wanted to learn from small first.

[@markhussey3077]

SWEET! Thanks. I've had my machine for a week. I think everything you offered solutions for was something I'd found irritating.

[@JamesDeanDesigns]

Its why I make these videos. These machines aren't perfect but when you understand then you can start to have some fun. Glad it helped

[@stevelawrence8053]

nice to share tips and tricks that have been out there for years.....thanks

[@JamesDeanDesigns]

Thanks. Its the type of information begginers often need 👍

[@EricFergusonCinema]

Thanks, just picked up one of these machines and have run some basic V-bit engravings using Easel. Really satisfying! Looking forward to doing more.

[@KristopherFAudio]

Hi James, love the videos and they have really helped me dial in my 3018 this week. One thing I'd love to do is make a wasteboard like your with the cuts to allow the mounting clamps. Any chance of a tutorial on how you made yours?

[@JamesDeanDesigns]

It is on my list but will be a few weeks before I get around to doing it. If you want to do it before hand, you can join the Sainsmart user group on Facebook and in the files section there will be something called introduction to making s spoilboard by Graham Bland 👍

[@KristopherFAudio]

@@JamesDeanDesigns thanks, I joined that group a few days ago. I'll take a look. I think my next thing after that will be to build an enclosure, i think in one of your videos I watched today you mentioned the plans for the one you have. Thanks again for the videos.

[@xavierm1018]

Thanks for the tips I just bought 2 weeks ago, still in the curve. I like your waste board.

[@JamesDeanDesigns]

Thanks - Graham also made a guide for making the waste board. I've not shared it on here but can be found on that Facebook group I mentioned

[@zeroremorse24x7]

That tip about pointing those clamps downward is super important.. was good of you to point out, it's a common mistake

[@AllenIsbell]

Okay. You win. Best 3018 videos out there.

[@JamesDeanDesigns]

Thank you 😁

[@davemiller579]

Great tips, I just bought a 3018 pro used on ebay and I'm really looking forward to getting to know this machine before i move on to a larger unit. Thanks for the info

[@davidrobinson506]

I want to know how you built and installed the sacrificial bed, PLEASE!!!!

[@ineuifity]

It looks like he craved out top and bottom of a 1/2 inch plywood, and double sided taped it down. The logo looks laser printed using the same machine.

[@neildupres7148]

Thank you! A really useful and informative guide - much appreciated!

[@JamesDeanDesigns]

Glad it helped :)

[@K_I_S_G]

Hi great video thank you. Do you have a link of the spindle you purchased with the full stem please?

[@JamesDeanDesigns]

Check out my video about the 20k spindle, there should be a link in the video description 👍

[@richardtbc]

I think what would be good helps, is to show your failures and then show how you corrected them. Other people as well as me are probably having the same problems but haven’t figured how to correct them yet.

[@JamesDeanDesigns]

H Julie. Most of my failures have mainly come from things I have already covered in a lot of my videos, particularly the top 10 issues video. Such a breaking bits, material coming loose, missing steps etc. Its one of the easiest ways for me to actually make the video as I can talk from real life experience.

[@stephenfisher7589]

really enjoy your videos steve

[@jasonthomas2908]

Regarding vibration, I have my 3018 sitting on some scrap polystyrene from a flatpack... works well enough.

[@garytaylor9446]

Thanks for a brilliant video. Just set up my 3018 Pro and am reading as much as I can and watching your (and others) videos. One thing that baffles me slightly as I’m only at the very beginning with Gcode is how would you let your machine know to make a rough cut and then stop for a change to a finer tool. Please excuse my ignorance if it’s obvious but a push in the right direction would be much appropriated. Thanks.

[@snapap690]

This is the 3rd video ive watched for this "machine ". This one makes it a hard pass. I think it's worth the extra $100 or so to get a much better one.. thanks for making the video. Great explanation!!🎉

[@kelaang]

Could you please tell me the size of the coach bolt you recommend? Thank you so much for this amazing video!

[@ianknight2053]

Thanks very much James. I must have looked at 100s of reviews of 3018 Pro machines and it’s amazing how many people expect it to work at it’s best ‘out of the box’. These people generally give the product 1 or 2 stars out of 5! I think people’s expectations are too high. If they would only watch your videos first I’m sure they would be far happier with their purchase. I’m just about to buy a 3018 Pro-Max and these videos are a massive help. Just one question. Did you make your spoil board and how does it connect to the bed? Thank you.

[@brent0004304]

@JamesDeanDesigns I had this exact question (regarding the spoilboard) while watching you spray adhesive activator on your bed. Really curious about the spoilboard setup you have there.

[@jwwilson1961]

Lasergrbl doesn't do portraits on my cnc-3018pro as you stated. Everything I tried failed to produce a decent portait.

[@dougmilburn2833]

Love you videos tip and trick are excellent. While watching your video I noticed that your copper nut and spring fits in snugggly to the nut seat. Could you tell me how set this properly as mine is only holding on a thin edge?

[@JamesDeanDesigns]

Take the lead screw all the way out, then squeeze that backlash nut in tighter and rethread the lead screw back in. Hopefully that helps

[@mikeparsonscc]

Good knowledge James 👌 Some really useful tips in there, thank you! 👍

[@DelbhoyCeltic]

Hey James. I have bought one of these since watching your videos. Love it. Sometimes my bolts on the X and Y work loose halfway through a job. Would you recommend Loctite Blue Threadlocker on those to keep them in place?

[@JamesDeanDesigns]

Yes. Its a fairly common problem. Couple of drops of blue loctite should do the trick 👍

[@EdBailen]

Another advantage of the painter's tape method is that if you are cutting a part out of a larger sheet of stock, you don't have to leave tabs. The painter's tape will hold everything in place.

[@JamesDeanDesigns]

Very true 👍

[@yourunclesam6780]

Nice tuto.Thank you so much

[@Ponytail52]

Hello James, Many thanks and greetings from Holland. Especially for your instructive video's on the 3018Pro. Interesting is the dustshoe for me. Unfortunatly your link directs to an Etsy-seller and there the item is sold-out... Do you know a STL so I can print it myself ? Keep up this good works!

[@JamesDeanDesigns]

Thank you. I'm not entirely sure why it says sold out, I know he is still selling them. Its probably best to contact him directly through Etsy or Facebook, his name is Tomas Horak. He might be able to sell (or give) you the STL file directly

[@Ponytail52]

Thanks!

[@tommythompson3189]

Thanks for taking the time to break things down!!

[@michaelberna987]

3m tape works also for securing material

[@stuartbelli9442]

Excellent advice, just looking at getting one of these so this will help fantastically

[@vapoureyes]

I feel as if I’m back at school again even though I’m a pensioner but it’s great to be learning about something I’m really interested in , I wish I was fifty years younger as I think this is really what I would have wanted to do as a career instead of being a toolmaker although my engineering experience goes a long way in understanding cutters feeds etc . Well teacher thanks for your assistance. It’s easy to make clamps on this machine so no need for a 3d printer.

[@JamesDeanDesigns]

Hope the video helped 😁

[@acethearonovitchcoachingex5538]

Thanks for the vids James, would you happen to have a video on your spoilboard?

[@JamesDeanDesigns]

I dont but if you head over to the Sainsmart group on Facebook, in there files section you will find the tutorial from Graham Blad on how to make it

[@justMikeKplwd]

Excellent advice. I'm getting the 3018 ProVer today. Looking forward to some fun

[@jordanr.4150]

Same here! Lots to learn, I love it!

[@tommyandersen7825]

Hi. Thanks for some awsome videos. You are my best source of learning for my new 3018Pro. I have one question: How is your spoilboard attached to the bed? Glue, tape, bolts...?

[@JamesDeanDesigns]

Blue painters tape and CA glue, the same method i mention in the video 👍

[@tommyandersen7825]

@@JamesDeanDesigns Thanks. I'll try that.

[@theoldpcguy]

My 3018 just arrived today, I will use your series as a guide. Thanks!

[@evandiplacido9999]

If you check your description, you show timestamps, however, they are typed as "23.02" they should be "23:02"

[@williamn01]

Get a life honestly!!!

[@JamesDeanDesigns]

Updated just for you 👍

[@JamesDeanDesigns]

@@williamn01 In Evans defence, correcting the timestamps allows KZbin to hyperlink them and skip the video to the correct section which I didn't know, so its actually taught me something.

[@josheus]

@@williamn01 The guys helping him out...

[@petermuller608]

Really helpful, thank you!

[@fatcharlieuk]

Great stuff as usual. Thanks fir sharing.

[@cwright3544]

Your videos are so helpful. Thanks for sharing.

[@ronmirrell9483]

Hello Dean Really appreciate you taking the time to go through all the areas of concern we beginners go through trying to decide if this is right for me. I have not bought my machine yet but am only a click away once I get a laser question answer I will need to help my wife with her business. I am going to purchase the 3018 PROVer. Any thoughts? Thanks again! Stay Safe and Well!!

[@JamesDeanDesigns]

Its a good machine. You gain fancy bits like limit switches but as a result you lose cutting space albeit there is now the extension kit. For me, getting the Pro with a laser was the preference over getting a prover but not everyone is interested in a laser

[@newburypi]

Great channel! Just received and built my 3918 last week and was hurting for knowledge. I suppose not as hurt as four of my bits :( My primary purpose for this machine is to mill electronic circuits, and have been playing with "height mapping." I'm hoping that you will present a video on this topic.

[@JamesDeanDesigns]

Maybe one day, but I don't know much about that my self at the minute 😔

[@newburypi]

@@JamesDeanDesigns I'm slowly working through it now, and will pass on my findings. That is, provided they are of positive results.

[@hankyknot]

Re the Z stops, can you not 3D print a mount that would offset the Z-stop enough so you don't physically use any cutting space?

[@JamesDeanDesigns]

Something like that will certainly help minimise the amount you lose but by the nature of how a limit switch works you would still end up losing 1-2mm minimum off each end. Doesnt sound much in theory but let's say 2mm off each end would be 10% of the cutting height lost

[@khamestielyyan6419]

Very informative and clear , nice ideas to start with. Thanks a lot James , any idea where to find Z probe guide bearing ,the one installed is short ,need longer one.

[@warrenking1815]

Well done, I have done all of the tips so far except for the probe and dry lobe. I have not done the ca glue, but it will be my method soon.

[@animeeveryday5979]

Hello James I been watching your videos for a while now and I was wondering if you could make a video on what programs you can use for the 3018 pro or the pro plus I have the pro plus and I been trying to make it cut out PCBs that I designed on easy eda and I can't find any good free program to design the PCBs and cut out the traces for the electrical system I made so if you could make a video on this I will watch and like the video for you