31 Joule HDP50 With Co2 & 8 Gram Steel Ball Bearings

[@yalieangami6233]

Aiwa 😘💕👍👍

[@THELESSLETHALSPOT]

Nice 12.5mm works great I get the same results with my hdp.

[@Arpon001]

My friend.... have you texted the SIG-Sauer MCX VIRTUS?.

[@thellc24-7]

Yes. I have it.💥💥💥

[@Arpon001]

​@@thellc24-7 It would be interesting if you can make a video testing it. Thanks 👍

[@123catz]

Bro it looks like you had hpa in the back now I messed up the threading on 3 hdp50s already the last one I brought to a machinist to do new threading. Hopefully it works after 😢 great videos btw

[@thellc24-7]

Where? There is no hpa any where around💥💥💥

[@123catz]

@thellc24-7 to me in the video thumbnail it looks like there is a big hole in the back of your marker like it's been drilled for extension or hpa?

[@thellc24-7]

@123catz yes. That is where you drill to adapt hpa. The brass cap is back in it now for co2💥💥💥

[@123catz]

@thellc24-7 yes so you did habe hpa in it before have you ever had trouble attaching like messing up the threading or anything?

[@thellc24-7]

@123catz yeah. It's set for hpa. I have vids on it. It's easy. And no, I haven't had any threading issues 💥💥💥

[@TOMAS-lh4er]

Do you have a video that explains what you have on the front of the pistol,the barrel ?? thanks

[@Joreel]

It's a barrel extender, but yeah a short video on what it is would be great 😋

[@thellc24-7]

Yes. Just go back in time😅💥💥💥

[@thellc24-7]

There is one. Just go back and look💥💥💥

[@rick31869]

hey bro , if these weigh 8 grams they must be 12.45 to 12.5mm's right ? the home defence -24 , home defense lol , is what , 12.6 to 12.65 , i like how how always used a c instead of a s in defense lol . i have measured some stock barrels on the umarex hdp.50 @ 12.8 and slightly larger !!! so i can see why the hd-24 tuning runs/barrels are so much better for closer bore matching , i would never ruin my tuning barrel by trying to shoot the common steel balls measuring 1/2 of an inch , i know some have done it lol , some also has reamed out the tuning barrel to better accept the 12.7 balls . the 1/2 inch steel balls weigh 8.53 grams !!!! i still have several hundred but only use them in my 1 out of my 3 hdp's with it being the only one with a stock barrel , @ 26 plus joules it is moderately effective, completely stock parts but slightly modified by me , lol , but my other one produces @38 joules , it has the ebay bought aluminum tuning barrel and hd-24 firing pin , and my 3rd one is the most powerful one at 42.22 joules , it has hd-24 tuning barrel and hd-24 firing pin ,the only one with the hex key cut out !!! for my tuning barrels i was lucky to find some 12.6 to 12.65 mm steel balls that weigh 8.39 grams , they work perfectly in the tuning barrels ! i guess if i had the 12.5mm's the ones that weigh 8 grams , i would apply 2 o3 three coats of clear paint to them to bring up the size to better fit the 12.65 mm tuning barrel , have you thought about doing that yet ? i been spraying ammo for paintball well over 30 years , when we had to proove our markers were set at 280 to 300 fps , i used just some smaller plain cheap ball lol , because my bore fitted balls were much more effective for range , speed and power !!! nice testing brother , nice power , very nice considering the steel balls used , i would love to see a side by side with the 12.65 mm steels weighing in at 8.39 grams , i bet your top joules would be closer to 38 or over , it would be interesting to see , you could even apply a couple of coats to 6 of them to bring up the size to be better bore fitted , please do this MR.LLC !!!!

[@JayJone5169]

Do u have to upgrade your detents for the heavier steel balls, modded, I hear that umarex factory detents or thin and don't hold up?

[@thellc24-7]

I did, and correct. The stock one wears thin. I have the one from Home Defense 24💥💥💥

[@lesslethalfordummies]

Little better results with the steelies.

[@thellc24-7]

Yep! The Steel usually wins💥💥💥