327-1414W Wind Speed Weather Station Setup

[@erkankarabag9905]

Adamım harikasın çok teşekkürler ah birde Türkçe altyazı seçeneği ekleseydin güzel olurdu Türkiye den selamlar

[@lacrossetechnology]

We'll pass along the suggestion. 😊

[@nmeadwyer]

Can I have my Station read NL time? It seems that EST and AST are the closest options.

[@ROTAXD]

I realize that walls, windows etc effect the transmission distance of the sensors. What I was wondering is does elevation adversely effect transmission distance. My back yard is surrounded by trees which greatly shield it from winds. My front yard is fairly open so my plan was to put the sensor unit on a pole, maybe 16 to 18' off of the ground. (4-5 meteres)

[@kariinnh8583]

Is the screen meant to stay on all the time? Because I like that.

[@lacrossetechnology]

Yes, when using the provided power cord, the LCD can remain on constantly, with multiple brightness levels to choose from.

[@waynebud462]

Can I purchase additional TX141w sensors to go with this system? I think the monitor allows us to access three remotes, but I’m not sure. Thank you.

[@lacrossetechnology]

Hey Wayne, our 327-1414W station can support additional Thermo-Hygro Senors, model TX141TH-BCHV3, which have multi-channel controls. Unfortunately, it cannot display readings from multiple TX141W Wind Sensors. You can find these add-on or replacement sensors under the Parts tab on our product page here: www.lacrossetechnology.com/products/327-1414W#parts -- For more details regarding how to set up multiple sensors, see page 13 of your full manual here: bit.ly/327-1414w_manual

[@waynebud462]

@@lacrossetechnology thank you for that info. I have purchased additional tx141w sensors, so I will keep them as spare. This has been a nice working system for several years, although I have now had to replace the wind cups twice. I didn’t have my instructions, so thanks for the link to those. 👍🏻

[@lacrossetechnology]

@@waynebud462 You bet! Sorry for the trouble with those wind cups. We're here to help if you should need further assistance.

[@clarencesweetapple9984]

I notice that it seems corrosion on the terminals seems to be a major issue. Would the use of dielectric grease help and take care of the problem?

[@lacrossetechnology]

Hey Clarence, a thin coat of dielectric grease can help, along with wrapping some Teflon around the sensor’s threads before screwing the cover back on. This should help keep water and excess moisture out of the battery compartment. We do apologize for any inconvenience. If you should need further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.

[@brunolapointe3966]

Hello. Should the Wind Sensor be mounted below a shelter?

[@lacrossetechnology]

For the most accurate measurements, the wind sensor should be mounted above the tallest structure in your area, clear for at least 50 feet in all directions. Obstructions such as walls, trees, rooftops, and more can often interfere with your wind speed values.

[@brunolapointe3966]

​@@lacrossetechnologyThanks

[@mpp50]

Can this work with an accessory that is wireless and waterproof that measures temperature? I have a wood fired outdoor hot tub close by and would love to know the temperature from indoors, wirelessly. Is there a channel that will accept this, and where can I get such an accessory?

[@lacrossetechnology]

Unfortunately, this 327-1414W model station does not offer a water temperature option. For something like this, the simplest solution would be to pick up our 331-09667V2 Pool Thermometer & Display: www.lacrossetechnology.com/products/331-09667v2 which is completely wireless and offers a floating waterproof sensor for inside your hot tub. Another option would be to upgrade to one of our newer Wi-Fi-connected weather stations to receive all of your weather and hot tub data on one display. For a similar setup to the unit you own, we'd recommend our V50 model: www.lacrossetechnology.com/products/v50 with the addition of the LTV-POOLV2: www.lacrossetechnology.com/products/ltv-poolv2 sensor. The advantage to this upgrade, besides being able to see the pool sensor data in the Extra Sensor area of the same display, is that you'd then have the ability to see all of your station and sensor data inside our La Crosse View mobile app anytime, anywhere. The app also gives you the option to set free push notification alerts (for when that hot tub is just the right temp), the ability to share devices with family and friends, and track history trends for your temperature, humidity, wind speed and direction, and more. Our info page here: www.lacrossetechnology.com/pages/la-crosse-view will help give a better overview about how these Wi-Fi-connected systems work. If you would like further customized help finding the right setup for you, please feel free to contact our store directly at 608-785-7939 or via email at: [e-mail]. 😊

[@JCsunfire]

Does the CA87092 model work on the app. I'm having trouble adding the device.

[@lacrossetechnology]

Hey JC, unfortunately, no. Our CA87092 model does not connect to WiFi for support with our La Crosse View app. For more details about La Crosse View and links to current WiFi connected models, please see our page here: www.lacrossetechnology.com/pages/la-crosse-view -- We apologize for any inconvenience.

[@turtlebirdrox]

What type of C lithium batteries can I use for the outside wind sensor? As soon as the cold weather hit, the sensor batteries died quickly. They are very confusing online. Is it just any C lithium batteries? They are expensive and I don't want to get the wrong ones. Thanks and I look forward to hearing for you

[@lacrossetechnology]

We recommend using two new brand-name regular C IEC LR14 Alkaline batteries from the same package for best results. If you notice the batteries draining quickly again, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page for further assistance.

[@josephrodriguez1330]

On my wind sensor LTV-W1 outside, the blue light is no longer flashing and is just a solid blue. The display in the house just shows dashes. What does the solid blue light mean? I checked the batteries on the sensor and they are still strong. What do I need to do to get the sensor working again? It has been working for a long time. Thank you.

[@lacrossetechnology]

Hey Joseph, we're sorry for the trouble. We'd first suggest a reset following the instructions in our other video here: bit.ly/lcv_restart -- If these fail, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page for further assistance. Our apologies again for the inconvenience.

[@mikeutube]

I got the station for this Christmas (2023). It has been up and running for 5 days now. I had to move the Weather station in the house from one location to another, approximately 1 foot, making sure I did not unplug it. I lost contact with the sensor out side? I have 3 "AAA" batteries in the station and 2 "C" batteries in the out door sensor. It's a new install so the batteries are about 1 week old. Brought in the outdoor sensor and took the "C" batteries out and put them back in and then pressed the down arrow for 5 seconds on the indoor weather station. Red light flashing on the sensor. The sensor reception icon (on the weather station) showing it's searching for the sensor but then it stops searching and the sensor is still not connected?

[@lacrossetechnology]

Hey Mike, we're sorry for the sensor trouble. For assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page. Our team there will be more than happy to help get this figured out. Our apologies again for the inconvenience.

[@denisecartier745]

Is it possible to read the settings remotely? Would like to put up at lake and view info from home?

[@lacrossetechnology]

Hi Denise, unfortunately not with this model. The 327-1414W was designed to show your data only on your indoor display. However, our new line of Connected Weather Stations, combined with our La Crosse View app, would offer this ability. You can find more information about these systems here: www.lacrossetechnology.com/products/monitoring-view

[@lionelroach2104]

Since replacing the weather station C83100, the new station recognizes the wind sensor LTV_W1 and the station is connected to internet, however the wind speed shows but the direction will only display north and no other direction.

[@lacrossetechnology]

Hi Lionel, we're happy to hear your station is up and running correctly. The C83100's wind direction though is actually a feature provided by AccuWeather, not from any of your sensors. This, along with your forecast icons, daily highs and lows, and chance of precipitation values will update 4-6 times a day with new Internet data. Our team is constantly making updates to improve these capabilities as well as their accuracy. We hope to have this resolved soon.

[@BarryMcKee3906]

Hi. I have the V30v2 station. My neighbour has the same one. His wind sensor seems to take over the one I have and his sensor ID number shows up on my station, along with the data. How do I freeze his sensor out? I suppose I shouldn't worry as the data is accurate. Any thoughts on this? Thanks Barry

[@lacrossetechnology]

Hey Barry, sorry for the trouble. There are a few ways to approach this. 1) If you're happy with the data the wind sensor is providing, you could continue to both use the same sensor for wind speed readings, this will allow you to keep one as a backup should it be needed down the road. Though you'll need to have him share that sensor with you if you'd like the data in your La Crosse View app (more on how to do that is covered in our other video here: kzbin.info/www/bejne/oorOhGuPa79oisU). Option 2) If you'd prefer to each use your separate sensors, you'll need to delete his sensor's ID on your weather station display in order for it to begin picking up yours. Instructions for this can be found on page 24 of your full manual here: bit.ly/v30v2_manual -- If you should need further assistance, our staff is always here to help. You can message them directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.

[@BarryMcKee3906]

Thanks so much.. I continue to be impressed with the after purchase service from La Crosse. You guys are awesome!

[@michaeln4018]

What if you’re replacing batteries and the red light doesn’t flash? I’m having that issue now. Thought it was dead batteries but I replaced with new C batteries and the red light did not blink and wind speed is not picking up on the display. Thanks for any suggestions.

[@lacrossetechnology]

Hey Michael, we are truly sorry for the wind sensor trouble. Our first suggestion would be to bring the sensor inside next to the display and clean the battery contacts as best as you can. After this, install a new set of alkaline batteries into the sensor and reset the display by removing all power, pressing any button at least 25 times, and leave it sit without power for about 10 minutes. After this time, power the display back up. Your sensor should reconnect automatically within the next 10 minutes. If it does, we then recommend wrapping some Teflon tape around the sensor’s threads before screwing the cover back on. This should help keep any water and excess moisture out of the battery compartment that can sometimes cause these sorts of problems.. If, however, the sensor does not reconnect, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance. Our apologies again for this inconvenience.

[@megancalvert7135]

Just wondering if you have to buy any addional pieces for the outside temperature??

[@megancalvert7135]

It takes about an addional sensor...just wondering if you need it for outdoor readings?? Thannk you

[@lacrossetechnology]

Hey Megan, this unit will come with our TX141W Sensor, which will provide you with your wind speed, outdoor temperature and humidity readings. No need to purchase additional equipment. However, add-on Thermo-Hygro (TH) sensors can be added for increased coverage in different parts of your home, or better accuracy on sunny days. Page 10 of your full manual here: www.lacrossetechnology.com/media/catalog/product/3/2/327-1414wv2_manual_020817.pdf covers this process and includes links to these sensors if you're ever interested.

[@megancalvert7135]

Awesome thanks. I will check it out

[@megancalvert7135]

So the wind sensor that comes in the box gives an outdoor temperature?

[@lacrossetechnology]

Yes indeed. 😀

[@NewfieRocker757]

Overall I love this weather station, however I am disappointed that the history button only displays wind data and not temperature values. Just curious why would La Crosse not have it store all data?

[@lacrossetechnology]

Hi Scott, we apologize for the lack of lengthy historical data for your temperatures values. This is a feature we include on some of our other models, but the 327-1414W specifically only offers 24 hour minimum and maximum temperature and humidity records. Page 12 of your full manual here: www.lacrossetechnology.com/media/catalog/product/3/2/327-1414w.pdf goes over how to access these. We apologize for the inconvenience.

[@lindarolph2251]

Why would the outdoor temperature stop showing after about 8 months? The rest of the screen works great.

[@lacrossetechnology]

That is quite strange. For assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page. We'd love to help get this figured out.

[@jeanniewsteve]

I have my weather station in my back yard, we have a huge tree not too far away but the unit still spins and works well in the southern direction. What happens as the cold weather hits and trees snow flies? I fear that it will be covered in snow and it won’t be spinning well, being made of plastic this could crack I’m thinking? Anyone else have any experience with the cold snowy winters?

[@lacrossetechnology]

The sensor was designed to withstand all normal weather conditions, including snow. However, it can be convenient to have it mounted in an accessible location to brush off any snow buildup that may occur under the right situations (snowfall with little wind). As for the tree, we'd recommend getting the sensor as far away as possible to prevent inaccurate wind speed readings and large clumps of heavy snow potentially taking out the sensor; an open area is ideal.

[@debbielyman6796]

We really like this weather station, but we noticed that lately the outdoor temperature is way off. How do we fix this?

[@lacrossetechnology]

Hey Debbie, our sincere apologies for the temperature trouble. To start, we'd first recommend bringing the sensor inside and placing it next to the display for at least two hours. After this time, compare the indoor and "outdoor" readings and let us know the results. This side by side test will help us determine our next steps. Sorry again for the inconvenience.

[@debbielyman6796]

​@@lacrossetechnology

[@debbielyman6796]

Thank you for the information, it worked beautifully. We thought we would have to buy a new weather station. Thanks again.

[@Spiter336]

Do I need to lubricate the anemometer bearing? and if so, what?

[@lacrossetechnology]

Nope, no lubrication will be needed for your wind sensor. For further answers to other common questions regarding our 327-1414W station, the full manual and FAQ documents can be found here: www.lacrossetechnology.com/products/327-1414w#support

[@q95oldies57]

No rain gauge on that model?

[@lacrossetechnology]

Correct, our 327-1414W Wind Speed Weather Station does not support a rain gauge. We are very sorry for any inconvenience. Many of our newer stations either come with this or offer it as an add-on; check them out here: www.lacrossetechnology.com/collections/weather-stations

[@harveyaitchison2718]

Followed your video to the “t”. The wind sensor is still not connected to the main station.

[@lacrossetechnology]

Hi Harvey, we apologize for the trouble. Please try resetting your unit using the steps in our video here: bit.ly/LaxTech_BasicRestart -- If this should prove ineffective, you'll want to reach out to our support staff directly, as they will be happy to help get you a replacement sensor. Send them a message with your information here: bit.ly/contact_techsupport -- Sorry again for the inconvenience.

[@timcooper3795]

I just opened up my unit and plugged it in. Even before putting the batteries in the the wind sensor it shows the outside temp (-4.2 which I think is accurate). The problem is that I have not but batteries in the wind sensor yet. Where is it getting this temp from?

[@lacrossetechnology]

Hey Tim, this is almost surely a sensor from a neighboring home. If you can provide your product model number (printed on the back of the main display) we'd be happy to send you specific instructions as to how to get this synced with your own sensor. Though, if the data appears to be accurate, we do have many users who choose to share the sensor info with their neighbors. Keeping other Temp/Humidity sensors as backups or using them in other areas of their home.

[@timcooper3795]

Thanks for the quick reply! Ya, it must be a neighbors that I’m picking up. I figured out how to search the channels and was able to connect to my wind gauge…which I just installed and Is working great (-4.2C with 19.5 kmh winds….was a little chilly to install)

[@lacrossetechnology]

@@timcooper3795 Awesome! We're happy to hear things are up and running and are here to help if you should have questions. 😊

[@Wolendian]

"OUTDOOR %" & "OUTDOOR C" DISPLAY NIL VALUES "--%" & "-- deg.C." I originally set up the sensor outside, and seem to be receiuving a wind-strength (albeit very low, as there's very little wind now). I now have two units sitting next door to each other inside the house for over 15 mins. to see if it is a 'hand-shaking' problem .... no change. Wind speed now shows "--.-" despite blowing at rotors for 30 secs. Inside temp. & % functions appear to be workling. Red-light is flashing on outside unit. whaT'S UP HERE?

[@Wolendian]

Ladies & G'em: Many tks yr precise instructions. IT NOW WORKS! Having originally installed it according to the manual more-or-less, might I suggest that you include the (rectifying) sequence you gave me as Step 1 in the next reprint of the manual? Also in the video-tutorial. Seems to me clearing the memory and getting a good 'handshake' are fundamental. Fingers-crossed for taking the sensor outdoors!

[@jeffbourgeois6050]

I do not have any Indoor HI and LOW Humidity Alert Icon, or any Outdoor Humidity Trend Indicator showing on my display.

[@lacrossetechnology]

Hey Jeff, we're sorry for any confusion. High and Low Temperature and Humidity alerts will need to be manually set and activated; instructions for this can be found on pages 10-11 of our 327-1414W manual here: bit.ly/327-1414w_manual -- Trend arrows, on the other hand, will trigger when the correct conditions are met. For instance, they will update every 15 minutes, comparing data over the past hour. If the temperature has changed by 2°F/1°C or more or humidity by 3%RH or more, an arrow will display that change's direction. If you need further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page. We are here to help in any way we can.

[@jozeglada7849]

How do you set the screen to stay on without going off?

[@lacrossetechnology]

The color LCD will need to be powered with the provided power cord. Batteries only will allow the display to turn on for about 10 seconds at a time after a button push and are primarily meant for backup purposes. We apologize for any inconvenience.

[@Railrodder]

It concerns me that no one at La Cross has bothered to answer to any of the questions or comments here.

[@lacrossetechnology]

Hi Railrodder, we apologize for the confusion here. A couple weeks ago we transferred our Google/KZbin account from a personal to business platform. Upon doing so, it unfortunately erased all of our responses here on KZbin, which to your effect does look bad. However, we can assure you that any comment made that is over two weeks old was indeed responded to an taken care of to our best knowledge. All new comments will receive our full attention. Did you have a question or issue with your product?

[@cocodesbois2051]

Hi thanks fot your video, my device won't give me the wind direction. Can you tell me how to fix this ? Thanks !

[@lacrossetechnology]

Hey Coco, sorry for the trouble and any confusion. Unfortunately, if you own the 327-1414W model featured in this video, it will only show you wind speed, as the sensor does not measure wind direction. If you own a different model and are having trouble with wind direction, please feel free to message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. Our apologies for any inconvenience.

[@patriciadeveau9009]

Does display light stay on?

[@lacrossetechnology]

Hey Patricia, when using the provided power cord, the display's backlight can remain constantly and is controlled using the LIGHT (HI-LO-OFF) button on top. When using batteries along, the light will only come on for about 10 seconds at a time after a button push. More details can be found in this item's support documents here: www.lacrossetechnology.com/products/327-1414w#support

[@kikicowan7572]

I just set my station up and I can not figure out how to get the outdoor temperature and humidity to show up. It's been on for an hour and the sensor is working fine and set up. What do I do?

[@lacrossetechnology]

Hey Kiki, we're sorry for the trouble. First off, what is the model number of your weather station? Is it the 327-1414W featured in this video? This should be printed on the back or bottom of the main display near our logo.

[@kikicowan7572]

@@lacrossetechnology yes that is the model. I found this video from the link on the manual

[@lacrossetechnology]

@@kikicowan7572 Thanks! In this case, we'd recommend performing a basic restart as covered in our video here: bit.ly/basic_restart -- Be sure to use a new set of regular alkaline batteries from the same package and have the sensor next to the display during this connection process. If this does not work, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance. Our apologies for the inconvenience. NOTE: Your model's TX141W sensor records all of your outdoor readings, including wind speed, temperature, and humidity.

[@johnrichard9946]

The wind speed led is flashing, but the outside temperature has two lines also the wind speed, humidity and wind speed all are showing lines through them

[@lacrossetechnology]

Hey John, sorry for the trouble with your outdoor sensor(s). Our first recommendation would be to perform a basic restart covered in our video here: bit.ly/LaxTech_BasicRestart -- If this should fail, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page, as we'd love to help get this corrected. Sorry again for the inconvenience.

[@annjones5480]

I have everything set up, light is flashing, lights on on the station, have indoor temps but after 15 minutes, nothing is connected to wind speed or temp outdoors. Still have dashes. What am I supposed to do now?

[@lacrossetechnology]

Hey Ann, we are truly sorry for the trouble. Could you pass along the model number of your product? This should be printed on the back or bottom of your main display.

[@annjones5480]

@@lacrossetechnology Model CA87092

[@lacrossetechnology]

Thanks @@annjones5480. Our first suggestion would be to try a basic restart by brining the sensor inside next to the display and following the steps covered here: bit.ly/basic_restart -- Be sure to use a new set of reputable alkaline batteries, other battery types can have transmission issues. Another thing, if you've been using this a while, please check the sensor's battery contacts and clean them as best as you can before performing the restart steps. If the contacts are a little rusted or if there's other evidence that moisture had built up inside the sensor's battery compartment, wrapping some Teflon tap around the sensor's threads before putting the cover back on can help to prevent this moving forward. If these steps still do not help get the sensor connected with the display, please reach out to our Canadian representatives at 844-687-4040, via email at: [e-mail] , or using their online form here: springfieldinstruments.com/customer-service/ -- Our apologies again for this inconvenience, we hope to help get this corrected.

[@tat255987]

Do you have one for off grid that doesnt need to be plugged in?

[@lacrossetechnology]

Hey Lance, yes indeed. Any of our current non-color LCD models will run fully on battery power. Here are some suggestions: www.lacrossetechnology.com/products/327-1417bw www.lacrossetechnology.com/products/328-96087 www.lacrossetechnology.com/products/308-1415fct www.lacrossetechnology.com/products/ws-9160uv2 If you should have any further questions, please just let us know. 😊

[@tat255987]

@@lacrossetechnology thank you so much

[@tat255987]

Ordered model 327-1414w thanks

[@denisecartier745]

Also can you buy a remote for this unit?

[@lacrossetechnology]

Hello again, what do you mean by remote? If you're looking for remote monitoring to be able to see your station's data anywhere on the go, we highly recommend one of our new Connected Weather Stations. These will connect with our La Crosse View mobile app (available on iOS and Android) and give you the ability to set custom alerts, share device data with family and friends, and receive NWS forecast updates right on your in-home display. For more information, visit our website here: www.lacrossetechnology.com/products/monitoring-view ... of course if you have further questions just let us know.

[@thelandballin747]

I just received my La Crosse weather station. But the wind guage light will not come on, and i can't get a wind speed reading. And yes i have 2 new c batteries.

[@lacrossetechnology]

We're sorry to hear this and apologize for the trouble. Our first suggestion would be to try a basic restart covered in our other video here: kzbin.info/www/bejne/f3_ccqOwj7yYapI -- using a new set of regular alkaline batteries. If your wind sensor readings still don't come up on the display with the sensor next to it, a replacement may be needed. For assistance with this, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. Sorry again for the inconvenience.

[@thelandballin747]

@@lacrossetechnology Thanks for the advice. But the wind station red light never blinks. Also it was an Amazon used like new product, so it was probably returned before for the same reason.

[@novascotiafakenews2091]

I think the product itself is very well made. The thing that I would like to see is stainless steel screws and mounting bolt. The price is high for this weather station so all the parts should be of the best quality. I live on the ocean and want this weather station to last without its hardware rusting away.

[@lacrossetechnology]

We appreciate the feedback and will be sure to pass these thoughts along to our R&D department. We also want to note that due to the salty air and harsh conditions, it is not unusual for outdoor sensors to experience shorter lives in ocianic environments. If you should ever need help regarding your sensor or weather station, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We are here to help and will do whatever we can to resolve the issue.

[@eugeniagonzalez1202]

Hello, I would like If It’s possible to increase the light level of display. Thank you

[@lacrossetechnology]

Hi Eugenia, the display's backlight can be adjusted using the LIGHT (HI-LO-OFF) button on the top. Each press should adjust the light level when using the power cord. Battery power only will only keep the backlight on for 10 seconds at a time. More specifics on this can be found on page 11 of your full manual here: bit.ly/327-1414w_manual

[@jj2.047]

What is the wind speed accuracy (as a percentage) I have model s81120

[@lacrossetechnology]

The Breeze Sensor packaged with your S81120 will have wind speed tolerances of +/- 10% at speeds 3kph (1.86mph) and above.

[@jj2.047]

@@lacrossetechnology ok thanks, fast reply

[@teresamasucci4573]

My wind speed isn't working. I changed the batteries on everything. My system is just 15 months. The metal where the c batteries toch at the bottom are rusted. I am so sad this stopped functioning. Any suggestions?

[@lacrossetechnology]

We are truly sorry for the wind sensor trouble. Our first suggestion would be to bring the sensor inside next to the display and clean the battery contacts as best as you can. After this, install a new set of alkaline batteries into the sensor and reset the display by removing all power, pressing any button at least 25 times, and leave it sit without power for about 10 minutes. After this time, power the display back up. Your sensor should reconnect automatically within the next 10 minutes. If it does, we then recommend wrapping some Teflon tape around the sensor’s threads before screwing the cover back on. This should help keep any water and excess moisture out of the battery compartment. If, however, the sensor does not reconnect, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance. Our apologies again for this inconvenience.

[@hernanvergara9313]

Mine rusted out also. Batteries were still good. I think it's a design flaw. Only the bottom contact were affected. That area was moist. Got a new one today, so I'll tape around the batteries and hope this time it'll be alright. Cheers

[@charlenepaxton7583]

We ordered a new lacrosse wind meter. We cant get ti to connect to the indoor screen.

[@lacrossetechnology]

Hey Charlene, sorry for the trouble. Our first suggestion would be to try a basic restart covered on our support page and video here: bit.ly/basic_restart -- If the sensor still isn't connecting after these steps, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance.

[@sandyfair5417]

After inserting brand new batteries into my LTV-W1, I don't get a red flashing light. I get a blue light that flashes once. I have been unsucessfull in getting a connection to this device even after the reset steps. I do have a connection though to the LTV-R3. Very frustrating.

[@lacrossetechnology]

Hey Sandy, we are truly sorry for the trouble. The LTV-W1 is a different sensor than the one that comes with the 327-1414W Station featured in this video, so the blue transmission light is the correct color for your model. As for it not syncing with your display, this could be caused by a few different things. For assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We assure you we are here to help and look forward to getting this corrected.

[@sandyfair5417]

@@lacrossetechnology Thanks for your response. I did get this working and now have wind speeds. There is wind direction. Perhaps that is a separate sensor? I'm also thinking I need a separate sensor for outside temperature? Am I correct on these 2 assumptions? I have been unable to get AccuWeather connected. When I go to may app screen, even following all your video instructions, I don’t find that icon to click on. I'd really like to get this functioning. My LaCrosse counter device has the screen location for it. Thanks

[@lacrossetechnology]

@@sandyfair5417 For us to provide accurate information we would need to know your weather station's model number. This will be printed on the back of the main display, typically by our logo.

[@sandyfair5417]

@@lacrossetechnology Sorry about that. I was not home when I was replying before but here you go. V22-WRTHV2 There is also an ID # OMOC84428 Thank you Sandy

[@lacrossetechnology]

Thanks @@sandyfair5417! In response to your questions, the wind sensor provided with the V22 station will only provide backyard wind speed, if your display is showing wind direction it is connected with the AccuWeather service to provide prevailing wind directions, as shown on page 8 of your full manual here: bit.ly/v22v2_manual For accurate outside temperature, please be sure to have the included Thermo-Hygro (TH) sensor mounted outside in a fully shaded location for best results. Our video on this topic here: bit.ly/TH_sensormounting may be helpful. In regard to your last comment, we assume you're referencing our Data Stream option for custom AccuWeather data or text streams on your in-home display. If you are not seeing the Stream Icon, it is likely you're on a sensor device page within the app. Please be sure to navigate to your Display's device page and scroll down until you see this Data Stream section. We show this specifically in our other video here: kzbin.info/www/bejne/pJvbgn-pa9atqM0 -- We should also note that you must be the display owner within your app, meaning if this device was registered with another account and then shared with you, this Data Stream option will not be available to you. We do apologize for any confusion or trouble getting this all working correctly. If you should need further assistance, please don't hesitate to reach out to our staff directly via the links provided in our previous comment. 😊

[@trevorjacobson7199]

How do you get the outside temp to show

[@lacrossetechnology]

Hey Trevor, just to confirm, you own the 327-1414W model featured here and are receiving wind speed readings, just not outdoor temperature?

[@trevorjacobson7199]

I believe the outside temperature sensor does not work. I have performed multiple resets as set out in the operators manual. Batteries have been changed and tested before instalation and the outdoor temperature readings are wrong.

[@lacrossetechnology]

@@trevorjacobson7199 Our apologies for the trouble. For further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.

[@reecealeck8314]

The outdoor is showing dashes on the bonus display. It's not showing the data for the bonus display. (Why don't you guys talk about the BONUS DISPLAY on this video???

[@MARIN7785]

What to do if it changes channels all the time by itself?

[@lacrossetechnology]

Hey Marchello, to make sure we're understanding your question correctly, could you pass along the model number of your weather station? This will be printed on the back or bottom of the display, typically near our logo.

[@paulchinn5981]

I am not getting my wind speed showing for some reason. I am trying to reset it again now and see what happens.

[@lacrossetechnology]

La Crosse Technology 6 months ago Hey Paul, we're sorry to hear this. Our first suggestion would be to try a basic restart covered in our other video here: kzbin.info/www/bejne/f3_ccqOwj7yYapI -- using a new set of regular alkaline batteries. If your wind sensor readings still don't come up on the display with the sensor next to it, a replacement may be needed. For assistance with this, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. Our apologies again for any inconvenience.

[@ronykhoury15]

Hello I need help, how can I make turn on the forecast what should I do to connect it?

[@lacrossetechnology]

Hi Roland, if your 327-1414W weather station isn't working quite right, we'd suggest a basic restart. These instructions can be found on our page and in our video here: bit.ly/basic_restart -- After this, following the steps described in the video on this page should allow the unit to begin functioning properly. Please be sure to power the display with the provided power cord for a constant backlight, and to only use new regular alkaline batteries in both the sensor and display, other battery types can have transmission issues. If you need further assistance after this, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. Our apologies for any inconvenience.

[@ronykhoury15]

@@lacrossetechnology well good news it worked sorry for all the trouble

[@lacrossetechnology]

@@ronykhoury15 No worries! We're happy everything is now up and running.😊

[@elizabethlederer1778]

What if sensor doesn't light up after checking batteries. I changed 3x

[@lacrossetechnology]

The sensor light may not necessarily flash all of the time. The more important thing is if you're not getting outdoor data on your indoor display. If you've worked through our basic restart process covered here: bit.ly/LaxTech_BasicRestart and still cannot get the sensor connected, a replacement may be necessary. For help with this, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. Our apologies for any inconvenience.

[@CampingDad247]

so the sensor is suppose to go outside but walls block signal? .. you guys think we live in houses with missing walls?

[@lacrossetechnology]

This is the same for any radio signal, walls, electronics, and other objects can all affect reception. In most cases for each wall, floor, or window the signal must pass through the reception distance is roughly cut in half, not often will this be fully "blocked".

[@soniamerman9840]

Why has unit stopped reading temperature and wind speed?

[@lacrossetechnology]

Hey Sonia, our apologies for the trouble. This means the sensor has lost connection with the display and some new batteries are likely needed in the sensor. Our restart steps here: bit.ly/basic_restart should help with this process. If you should need any further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.

[@cindyhalbakken775]

Why does it take so long for it to connect with the forecast?

[@lacrossetechnology]

Hey Cindy, we are sorry for any trouble with your weather station. The display should start showing weather forecast icons upon powerup, with the predictions becoming more and more accurate over time. Our other video here: bit.ly/forecast_vid covers this topic specifically. If, however, this comment is in regard to your outdoor sensor not connecting with the station, Our first suggestion would be to bring the sensor inside next to the display and clean the battery contacts as best as you can. After this, install a new set of alkaline batteries into the sensor and reset the display by removing all power, pressing any button at least 25 times, and leave it sit without power for about 10 minutes. After this time, power the display back up. Your sensor should reconnect automatically within the next 10 minutes. If it does, we then recommend wrapping some Teflon tape around the sensor’s threads before screwing the cover back on. This should help keep any water and excess moisture out of the battery compartment. If the sensor does not reconnect, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance. Our apologies again for any inconvenience.

[@geraldhudlow4545]

why would I be unable to view 0utside temperature?

[@geraldhudlow4545]

was on wrong channel. now working fine.

[@RichG122]

My rain gauge worked one time on the initial set up. I went back 2 weeks later after taking the batteries out to try to reconnect with the station and it won’t reconnect. I’ve tried to power off the station completely both batteries and AC power and power it back up again and it still isn’t communicating with the rain gauge. The batteries are all correct as far as polarity. I do get the Wi-Fi signal right by the word rain but I still do not see any zeros or it doesn’t work when I trigger the rain gauge.

[@droneit3160]

I got that same one but mine is now not displaying outside temperature or wind reading could it be the batteries but shouldn't a low battery icon be displayed mine is not showing that

[@lacrossetechnology]

It sounds as though your sensor has lost connection completely, in this case, no battery info will show. We'd suggest reviewing our restart video here: bit.ly/LaxTech_BasicRestart with a new set of regular alkaline batteries. If you should need further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. Our apologies for any inconvenience.

[@droneit3160]

@@lacrossetechnologyThanks so much for the quick response but when putting it back up it fell and the bracket got broke as well as one of the wind arms so gotta pick up another one now on Friday:(

[@lacrossetechnology]

@@droneit3160 Oh no!! We're sorry to hear that. If you need help, please feel free to message us via the links provided in our previous message.

[@droneit3160]

Hi again...so before I go buy a new one I was wondering if you guys sell these parts...I need the wind arm and the bracket ..not the with the nut you hand turn to tighten but just the piece on the other side of that which it screws into for pivoting...thx.

[@lacrossetechnology]

@@droneit3160 Assuming you own the 327-1414W, you can find specific parts for that item here: www.lacrossetechnology.com/products/327-1414WV2#parts -- For additional help with any orders, please contact our store directly at 608-785-7939 or via email at: [e-mail]

[@danpalko8084]

How do. You change channels? My unit is on channel 3 and not reporting outside temp.I have a 3 in 1 no added sensor. Thanks

[@daniellandry507]

Station météo lacrosse toujours brisé

[@lacrossetechnology]

Hey Daniel, we are sorry to hear this and apologize for any inconvenience. For assistance with your product, please find our La Crosse Technology - France contact information here: en.lacrossetechnology.fr/contact.html

[@djtommy1864]

I was interested in buying this until i saw it took batteries. If someone wants to place this on their roof do you really think they want to keep going up there to change the batteries ? It should have came with a wire

[@lacrossetechnology]

Hey DJ Tommy, we are sorry you feel this way. However, we did want to note that each new set of reputable alkaline batteries in the outdoor sensors should, in most cases, last over two years, so it's not like it would be a yearly venture. But we understand the concern and appreciate the feedback. More details and answers to other FAQs regarding the latest version of this item can be found in the support documents here: www.lacrossetechnology.com/products/327-1414wv2#support

[@alyshaclark6497]

My outdoor temp is all of a sudden reading inaccurately it’s 1 degree Celsius outside and it’s saying it’s 20 degrees Celsius

[@lacrossetechnology]

Hey Alysha, sorry for the trouble. Is the sensor currently in intense direct sunlight with little to no wind? These conditions can sometimes cause inflated temperature readings while using the TX141W sensor. If not, you can always try a side-by-side test by bringing the sensor inside next to the display for a few hours and comparing the readings on the display to those of the sensor. If these remain this far off, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance. Our apologies again for any inconvenience.

[@louisebastien594]

No matter what type of C batteries I insert in the outside sensor .... the red light does not flash . The unit is new since December 24, 2018. What do you suggest???

[@lacrossetechnology]

Hi Lousie, we are sorry to hear this. If your sensor data is not appearing on your station's display, we recommend reaching out to our support team here: www.lacrossetechnology.com/support/index/form/ -- They will work to get you a replacement as soon as possible. Sorry again for this inconvenience.

[@dannypassmore7512]

How come when l set the time it always loses an hour later on

[@lacrossetechnology]

Hey Danny, this is likely due to an incorrect time zone or daylight save time setting. Ensure these are correct by following the Setting Menu instructions at the 4:31 timestamp in this video. NOTE: If you live in an area that observes DST, keep that setting ON to have the unit automatically adjust for these time changes. If you need any more help, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page. Our support staff will be happy to help get this corrected.

[@pilbomags488]

Why was this unit retired?

[@lacrossetechnology]

Hi Pilbo, our apologies for the discontinuation of the 327-1414W weather station, this decision was likely used to make room for updated sensors and newer tech. It looks like this item was replaced by our 327-1417 models, which should be back in stock later this month: www.lacrossetechnology.com/products/327-1417v2 -- This version also offers a non-color variant for full wireless (battery only) operation. That 327-1417BW model can be found here: www.lacrossetechnology.com/products/327-1417bw -- If you need help with your current device please let us know.

[@haroldkaste5175]

Wind censor is turning but doesn't sent show in the station

[@haroldkaste5175]

Just installed the unit, and can not get a, reading off the wind sensor, it worked before I installed it, its only about 30ft.from the station .

[@lacrossetechnology]

Hi @@haroldkaste5175, we apologize for the connection issues. Our first suggestion would be to perform a restart following the steps here: bit.ly/LaxTech_BasicRestart to get your sensor reconnected. After it does reconnect, leave it sit next to the display for about 10-15 minutes before moving it back outside. If it loses connection with the display again, this could be a location issue, as certain types of windows and walls can either reflect or absorb this transmission signal. Trying a new sensor and/or station location can oftentimes help resolve this issue. Now if your sensor does not reconnect with your display, or you believe there are other problems, please get in touch with our support team here: www.lacrossetechnology.com/support/index/form/ and we'd be happy to get you a new working unit should it be neccessary. Sorry again for this inconvenience.

[@haroldkaste5175]

.@@lacrossetechnology. Tried this, worked for about half hour. checked the new batteries with meter and they read 1.5 volts. The unit is mounted on top of the roof on HD antenna pipe above the trees , This is happened twice now.

[@lacrossetechnology]

Hi Harold, as mentioned in our previous reply, a new location for your sensor and/or station may be necessary depending on the way your home is setup. If either the station or sensor is surrounded by other electronics (such as an antenna), this can cause interference. However, if a new location does not resolve this issue, please message our support team here: www.lacrossetechnology.com/support/index/form/ and we'd be happy to get you a new working unit should it be neccessary. Sorry again for this inconvenience.

[@195931]

why does the outside temperature not show\

[@lacrossetechnology]

You may be viewing channel two or three (used for additional separate temp/humidity sensors). Press the DOWN ARROW button a few times to cycle through these channel options. If you do not see your outdoor temperature and humidity appear, please try a basic restart of your station. Steps for this are covered in our support video here: bit.ly/LaxTech_BasicRestart

[@patfackler1454]

I've had mine for a year and I'm baffled why the battery terminals are made of cheap metal that rust,when outside,instead of stainless steel. Had to change batteries because of poor construction of unit.

[@lacrossetechnology]

Hey Pat, we are deeply sorry for the trouble with your wind speed sensor. Our support staff recommended wrapping some Teflon tape around the base’s threads before screwing the cover back on. This should help keep any water and excess moisture out of the battery compartment. If the sensor is no longer working, or if you need additional support, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. Sorry again for the inconvenience.

[@anthonyferrara2222]

There should be a mounding bracket that allows you to attach it to a pole.

[@cynthiasabinske9550]

We used conduit to mount ours.

[@davidbohinsky6680]

is that TFA spring breeze clone?

[@lacrossetechnology]

Hi David, our friends at TFA shared our design to create a European version of this weather station that we hope you enjoy. 😊

[@chiassonstephane1248]

How do we do to put it in french

[@lacrossetechnology]

Hey Chiasson, unfortunately our 327-1414W model featured in this video does not offer a French translation. If you could provide us with your product model number (assuming you own a different one) found on the back or bottom of the main display, we'd be happy to help find a translated manual if available. Our apologies for any inconvenience.

[@nisezz]

I have worked for hours and hours and hours trying to get the wind sensor to connect and the WIFI to connect...We did once today get the wind sensor to work but now after removing batteries unplugging the display it still will not connect and they are setting side by side and by the router. I can get WIFI but no internet...once the display connected but fiddling with the settings and such it disconnected again. WIFI signal is still flashing. We do live in an aluminum sided home and the units are no more than 60 feet from each other. Temperature and rain gauge work fine and the blue light on the Wind sensor is lit. This model is NO longer supported or sold and I just purchased it Dec 8th 2021. Model #V30v2...rather disappointed with this unit at this time.

[@lacrossetechnology]

Hey Denise, we are deeply sorry to hear this and apologize for the trouble. For further assistance with your outdoor sensor as well as WiFi connection, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We assure you we are here to help and look forward to getting this corrected.

[@allanderbyshire3793]

My feels like temp. for the most of the time shows the same as the actual temp. why? While listening to weather report on radio it says a big difference.

[@lacrossetechnology]

Hey Allan, there are a number of factors that determine your station's Feels Like Temperature reading. If you could share your station's model number (printed on the back), we'd be happy to offer more specifics.

[@allanderbyshire3793]

CA87092 is the model number

[@lacrossetechnology]

Thanks @@allanderbyshire3793! The CA87092's Feels LIke Temperature will display wind chill values at temperatures below 50°F (10°C) and Heat Index values at temperatures above 70°F (21.1°C). If your outdoor temperature reading is between these values, the Feels Like Temp will display the same as the outdoor reading. Also, wind chill readings will only begin to factor in if there is at least a 5mph (8kph) sustained wind speed. Varying speeds below this will likely give the same Feels Like value as the current outdoor temp. More information can be found in your full manual and FAQ documents here: www.lacrossetechnology.com/products/ca87092#support -- If you should need further assistance, please reach out to our Canadian support representatives via one of the options below. We apologize for any trouble. Email: [e-mail] Online Form: springfieldinstruments.com/customer-service/ Phone: [phone]

[@allanderbyshire3793]

Thank you.

[@sorich]

Do not follow this guys technique at 3:54 its about the worst thing I have seen in an instructional video.

[@bleepbleep1961]

He is NOT very good at screwing .... That's for sure !!

[@BeauPeeps69]

I actually cringed when I saw him screwing the base down.

[@BeauPeeps69]

Wind sensor does not show real time data. Only when the sensor connects to the base display every two minutes. Forget about gust readings.

[@lacrossetechnology]

You are correct in that the readings are not constant, however, the interval is about 30 seconds, not two minutes. We apologize for any confusion.

[@vitalikoz]

Что входит в комплект? Нигде нет официальной информации

[@lacrossetechnology]

Hi Baden, the links in the video description will lead you to our product pages. But the latest 327-1414Wv2 will come with the color display and outdoor TX141W sensor, which measures wind speed, temperature, and humidity. This product page with more info can be found here: www.lacrossetechnology.com/products/327-1414wv2 -- If you have any further questions, please just let us know.

[@robertparent1790]

Thanks

[@JCsunfire]

And there is no barcode on the device.

[@lacrossetechnology]

Hi JC, if your station does not have a white sticker with a barcode, it's unlikely that it offers WiFi connectability. For more details about our La Crosse View app and links to current WiFi connected models, please see our page here: www.lacrossetechnology.com/pages/la-crosse-view -- We apologize for any inconvenience.

[@Kevin-oz9fw]

Why doesn't it show the most basic of weather info ...Barometric Pressure? and trend?

[@bleepbleep1961]

That is the one thing that I was very surprised at as well !!!

[@judywoods2499]

what is "check device is in provisioning mode and try again" when connecting to wi-fi?

[@lacrossetechnology]

Hey Judy, "Provisioning Mode" simply means that the station/display is searching for a WiFi connection. This is typically indicating by a flashing WiFi Icon on the display. For help getting one of our La Crosse View models connected, we suggest reviewing our page here: www.lacrossetechnology.com/router_info NOTE: The 327-1414W model featured in this video is not a WiFi connected unit and does not work with our La Crosse View app.

[@trex3429]

My devices won’t pair.

[@lacrossetechnology]

Our first suggestion would be to try a basic restart covered in our other video here: bit.ly/LaxTech_BasicRestart -- If these steps continue to be unsuccessful, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance. We apologize for any inconvenience.

[@dominicknole3845]

The display does not look bright.

[@pourekk]

Dominick Nole it's the camera filter

[@lasandar]

Station Has no use for me cuz it dont have dedicated app ;) on mobile devices

[@lacrossetechnology]

You're correct! This model does not connect to the Internet and therefore does not have the ability to send data to an app. However, we do have a variety of other connected stations that do. Check out our La Crosse View connected items here: www.lacrossetechnology.com/products/monitoring-view/view-connected

[@devendersingh8633]

Insphal weather

[@robertorzech2466]

If I would have known it doesn't show wind direction or barometer ( The two most important factors about weather) I wouldn't have purchased this piece of junk. La Crosse has left a bad taste on my mouth that will last for a long time ! Typical corporate rip off ! "Pretty package and no content" FAIL !

[@lacrossetechnology]

Hi Robert, we sincerely apologize for any misleading information. The full accurate list of features should have been listed on the packaging and/or on the online retail listing where you made the purchase. If you'd like to talk about a possible switch to another model that offers these or similar features, please reach out to our support staff directly here: bit.ly/contact_techsupport

[@scrammy]

Do you guess at the features and specs of all the products you buy without reading them, or just the ones you want to troll about online?

[@robertorzech2466]

​@@scrammy Sorry, but your excuses are pathetic ! It's still a corporate fine print rip off ! Quit trying to minimize it and just admit it.

[@jkeithv65]

Robert you obviously want to be angry about everything. The list of features isn't in fine print, pretty simple to read.

[@scrammy]

@@jkeithv65 I thought Robert would have said "temperature" was an important weather factor. But, no, I was wrong. He went with wind direction. Kinda makes me wish he was gone with the wind...

[@daniellandry507]

Pas de service

[@lacrossetechnology]

Hey Daniel, we apologize for any trouble. Please see the links below for International (French) support. France: www.lacrossetechnology.fr/assistance.html Canada: springfieldinstruments.com/fr/service-a-la-clientele/

[@daniellandry507]

J essaye de vous envoyé l informations demandées ça fonctionne pas

[@daniellandry507]

@@lacrossetechnology Model ca87092

[@lacrossetechnology]

@@daniellandry507 Our Canadian support staff at Springfield Instruments can also be reached via email at: [e-mail] or phone: [phone] -- Sorry again for the inconvenience.

[@TitoLukason]

Wind speed im m/s is more useful than km/h...but nonetheless nice device thou

[@lacrossetechnology]

Thanks Tytus, we appreciate your feedback and will be sure to pass along your suggestion to our engineers.

[@beaglebeast3292]

I just called LaCrosee Technology to request I get instructions to return, for repair of a station model 327-1414W, mentioned above. I guess I called the wrong number as all I was told is that "We don't do that here" You have to call tech support..after that I was offered ZERO assistance. No phone number or any other help, just silence... just seemed like I was bothering the guy that was on the phone! So sorry to bother LaCrosse Technology..you have absolutely set a new LOW LEVEL for policy in helping customers! You cannot get any worse than the experience I received. LaCrosse policy; Answer phone, say , Not, not my department.....appear to be totally not interested in why I called; (LaCrosseemployee; remain silent, offer no assistance, offer no other phone number to contact, remain silent again....remember company policy by remaining silent and offering NO, repeat NO assistance. Way to go LaCrossse!!! You're number ONE for helping your customers!!! WOO HOOO!

[@lacrossetechnology]

We sincerely apologize for the customer service experience you've detailed above, and thank you for bringing this matter to our attention. We are, however, curious as to the phone number you called, and whom you may have spoken with. As for help with your 327-1414W, we'd be more than happy to help figure out a solution. Please send us your name, email address, phone number, and the number you called originally in a private chat on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page (assuming you'd rather not post this info publicly on KZbin). We'll then have someone from our actual support team reach to you soon after. Thanks again for the message, we are truly sorry for the troubles.

[@daniellandry507]

327 1414w no good

[@lacrossetechnology]

Hey Daniel, we are sorry to hear this and apologize for any trouble. If you need assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We assure you we are here to help in any way we can.

[@robertorzech2466]

You flew through the important part and I couldn't see which finger was pushing what button. I couldn't believe it. What a horrible help video ! It makes me want to toss it into the garbage ! Thanks for nothing !

[@lacrossetechnology]

Sorry Robert, we apologize for the trouble. If you're referring to the settings menu, the 3 main buttons are the TIME SET and UP and DOWN arrows. More on this and other features can be found in our full manual here: www.lacrossetechnology.com/media/catalog/product/3/2/327-1414wv2_manual_020817.pdf

[@scrammy]

Pro-tip: You can rewatch a video on KZbin. You can even slow them down.

[@robertorzech2466]

@@scrammy Sure it's all my fault for not using all the tools available to me for deciphering the high speed button bushing. Thank you

[@jkeithv65]

It was pretty clear on the video, didn't seem that hard to follow. And likes scrammy said, all you have to do is pause it. He was just giving you some advice on what to do.

[@BrianAllaway]

Does it matter what channel the outside temp is on. I have new batteries in my sensor but there are no readings on the monitor.

[@lacrossetechnology]

Hey Brain, if you're not using separate add-on temp/humidity sensors (model: TX141TH-BCH), please be sure to keep the station set to Channel 1 using the DOWN arrown button. The included TX141W wind sensor will always use channel 1. More specifics are covered on page 13 of your full manual here: bit.ly/327-1414w_manual -- For additional assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.

[@sonyasalter1294]

I have no info showing for outside

[@lacrossetechnology]

First, try a restart covered in our other video here: bit.ly/LaxTech_BasicRestart - making sure to us a new set of regular alkaline batteries for best results. If connection issue persist, please message our support staff here: bit.ly/contact_techsupport, or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page for further assistance. Sorry for any inconvenience.