Chalk335xi gets the Speedtech kit installed, with the Garrett GTW3884R BB Turbo, water pump and coolant hoses, New HPFP and Crank sensor all get installed. Check out Dylan's Channel / chicagoe9x
Пікірлер: 33
@Bitaliktderr2 жыл бұрын
You lost some weight? looking good G, keep up the great content!
@N54RacingChannel2 жыл бұрын
🙏
@javi_335i2 жыл бұрын
Nice video 🔥🔥 can’t wait to see the end result 👍🏽
@ChicagoE9X2 жыл бұрын
Can't wait to hear it run
@okeeracing67652 жыл бұрын
Sick build 💪
@evanprice11222 жыл бұрын
Digging the content. Killed that manifold flange with gasket maker though. The inside of the flange looks like what you wiped off the outside.
@N54RacingChannel2 жыл бұрын
Yeah hopefully the 1200 plus degrees it sees will clean it. 😂
@kingkros44212 жыл бұрын
Thanks for actually showing details and fitment shots . I have a 335xi and it helps. Is there any reason why you went GARRET instead of PRECISION !! Or any other and why Thanks 👍🏾
@N54RacingChannel2 жыл бұрын
Garrett is far superior. Lol. I just like having the water cooling run through turbo. This Speedtech kit and turbo is almost 3 years old. Never been serviced and still performs like it did on day one. Looks new because I just re ceramic coated everything
@kingkros44212 жыл бұрын
I was on the fence about it, but you made a valid point . I appreciate the reply. CONGRATS !!! On the shop Keep the content rollin !! 👍🏾
@SHWELL112 жыл бұрын
In the process of doing an Engine Swap but with FBO added to the process. Should I add all the piping and Downpipes while the engine is out?
@yobabymamasbabydaddy49112 жыл бұрын
you can try putting rear inlet on or mock it up when dropping engine in if that’s helps. when i install inlets the rear one was a pain in the ass
@N54RacingChannel2 жыл бұрын
Yes add all that while engine is out. Will be much easier for you.
@husainamin83772 жыл бұрын
Loved this channel, what O2 sensors are you running with speedtech kit?
@N54RacingChannel2 жыл бұрын
Standard Bosch o2’s
@husainamin83772 жыл бұрын
@@N54RacingChannel With Heat-Sink Bung Extender?
@N54RacingChannel2 жыл бұрын
@@husainamin8377 no
@frankwickham295010 ай бұрын
You ever have problems with transfer cases or anything like that pushing that much power?
@JohnPanzavecchia00012 жыл бұрын
Is that a custom oil pan? My N54 335i doesn't have that extra part with the plate.
@N54RacingChannel2 жыл бұрын
This is an xi oil pan. They are different then RWD cars.
@JohnPanzavecchia00012 жыл бұрын
@@N54RacingChannel Oh, I didn't know the Xi needed a different oil pan. Very clean build BTW! Love the white color. That means you really gotta keep the motor clean.
@Zalle3352 жыл бұрын
Sleeved block? What's the HP goal? Thinking of throwing pistons and rods into my car but I feel like next thing to worry about is ovaling the cylinders.
@N54RacingChannel2 жыл бұрын
Stock sleeves and open deck. Going for 900-950
@Zalle3352 жыл бұрын
@@N54RacingChannel sick, I was worried about sending my engine to 650whp 😂
@briston64 Жыл бұрын
where did you get the t4 divided housing speedtech sells this turbo but single scroll only
@N54RacingChannel Жыл бұрын
OG kit. Had it for 4 years already. 😂
@briston64 Жыл бұрын
@@N54RacingChannel I know you’ve installed a lot of these how’s the spool in the open scroll vs your single ?
@briston64 Жыл бұрын
I found a twin scroll and scooped it fast it was the last one ig they stopped making then