350 Engine installed c10 truck

[@TaekwondoFitForLife]

This man does thing the right way! Nice truck Sir, you rock that truck for certain! Love the work you perform, I’m putting in a fresh 383 with Tremec 5 speed in Spring into mine. It’s a “63” love these old trucks! Bought mine from Alabama from a man who’s didn’t know what he was doing with the old truck. Your truck is so cool! Keep-um rollin…

[@biglon62]

I’ve been mechanic for 36 years love the way you do thing sir!!

[@Gibson63.]

Thanks man I’ve been in construction for 36 years framed a lot of houses, I’ve always enjoyed doing this on the side this truck will be going to my dad. Happy Thanksgiving

[@ericcorse]

Y'all made that look easy. That dual snorkel housing looks awesome.

[@Gibson63.]

Yeah the single Long neck snorkel are supposed to go on these old Chevrolets but I figured I’d be different I think it looks pretty cool

[@savageblades360]

Hey Gibson! Your videos have been really helpful in my Chevy build so thank you. That was cool how you spun the truck around.

[@tombrooks8565]

What a great moment to capture! I'd have probably gone with black on the breather, but that chrome is pretty. Thanks for not putting music over the fast motion.

[@555chevy]

Great looking, that chrome air filter looks real good, it gives it the "Back in the day" accessory look.

[@joewood.official2936]

Love your channel thank you you have helped me a lot with my 66 your the best on you tube

[@Gibson63.]

Thanks for watching man

[@scotthayes914]

Having a 600 hp 383 striker built fo our 64 now. In the process of taking a 350 motor and trans out now. Lots of good hints and tips from this video. Thanks for posting.

[@lt.columbo5919]

Great channel. Very comprehensive and the attention to detail and quality makes other channels pale when compared..."This is how you build a nice truck"

[@norakered6825]

Great video using equipment the average person would have. Awesome work!

[@codewarrior65]

I have been digging to find all your videos on this truck build. Very nice work, meticulous, and an eye for detail. I like the old L-79 350 HP 327 air cleaner. Thanks for sharing.

[@georgerogers1523]

Perfect information. I had exactly the same questions about the mounts, bell housing, etc. Thanks so much. You saved me much confusion. I will run the factory 3 speed as well, and adding an over drive. Everything else like your build.

[@militarychevy711]

Don't scratch the paint! I lost count of how many times I've screamed that. haha! Looks great bud.

[@seanwebb1485]

Glad you have plenty of work and still have time to work on the truck. Nice work Steve!

[@VintageTexas59]

Very nice, I like the chrome snorkel set-up, classy look !

[@Gibson63.]

Thanks

[@DoubleRRestorations]

Looks great sitting in the truck. Nice work.

[@Gibson63.]

Double R Restorations Thanks

[@gmctrk63]

Coming along nicely Steve. Thanks for the vids.

[@Gibson63.]

Thanks man

[@shortcut579]

It's nice to go to the junk yard for stuff .In jersey we have "salvage" yards ,everything gets scrapped .I like the low tech ,no modern crap that looks cute .Someday Pop might want a/c though .

[@johndudley5987]

Looking good. You do great work. Glad to see you back at it. Love the videos.

[@craigclemans966]

Just subscribed but have been watching your videos. Enjoy you talking us through what your doing and your attention to detail.

[@wileygailey9553]

Good to see you back on the tube Gibson. Project looking good.

[@michaelmarcel3508]

What transmission did you put on your crate 350 and where can I buy it?

[@tombrooks8565]

that engine looks great! It's been awesome following your work. Glad you changed to orange!

[@ronster6656]

Careful now. You’re gonna end up liking this one more than the red one...okay, maybe not, but man O man is this one going be real sweetheart when you’re done with it. As always, great stuff from the coolest one-car garage on the planet.

[@Gibson63.]

Thank for watching man

[@XtremeScratchers]

Great Video like always, I'm finally coming along with mine, in process of putting in new front suspension drop and steering components, same as yours

[@Gibson63.]

Xtreme Scratchers cool deal man I know it made a big difference in my red 63

[@fitzyholden1036]

Nice job detailing the donk. Goes to show that you don't have to spend a fortune on billet and chrome parts to get a good, clean, detailed look.

[@TheShadeTreeFixitMan]

Looks good sitting in there.

[@Gibson63.]

Thanks

[@richardmartinez8174]

Yeah it’s coming a long nice 👍 good job as always.

[@richard_lerma_jr]

That truck is coming together so nice!! Awesome content

[@rking674]

Great work as always man. If you’re gonna do another one I’d hire you to do mine!

[@novafan6380]

I was really hoping you'd keep the inline. Looks good though! 👍🏻

[@Gibson63.]

Thanks man

[@joedurkin8953]

That motor and transmission is sexy

[@bmt336]

Looking good! Glad to hear work is busy, that's always good for the bank account, especially these days. Have a Happy Thanksgiving!!!

[@superc4308]

Awesome how to series ✌

[@stonechip]

Great work again,looking forward to the next one.

[@IowaMercMan]

Good to see you back at it.

[@w.w.oklahoma6010]

Good to see ya!!! I figured you was working your ass off!!! The truck is going to glide down the road. "Happy Thanksgiving" and enjoy that yard bird and stuffings!!! w.w.

[@tykellerman6384]

Damn looking pretty fine can’t wait to here it roar

[@hillbilly59apache59]

Amazing 👍👍

[@jenniferanthony8717]

Hello! I’m so happy I came across your channel. I inherited my grandfather’s ’62 Chevy C10 step side years ago and can finally spend some $$ on some things. I’ve decided to give up on the original and very tired straight six and go with a 350 while keeping the three on the tree. Watching this video has made me very excited at the possibilities. Any advice you can give is welcome.

[@pappabob29]

As always, very professional looking work. Yea, "don't scratch up my nice paint work" !! ;o) Gonna look real pretty when you open the hood !! 👍👍

[@Gibson63.]

Hey man thanks for watching

[@danrasmussen4125]

Needs a 2000 4.3 vortec serpentine belt setup gives you a.c. mount and power steering

[@Gibson63.]

That would be pretty cool maybe later on down the road

[@lildeena1]

Is there a simpler way to do AC? without serpentine setup Im a newb and don't need PS or PB but where I live you have to have AC even in the winter. normally AC compressor is up top on PS and the alternator is on the DS but these trucks are factory setup mostly without ac and alternator is on the PS like his. Can you run the hoses across? do you use a long water pump? reverse water pump? Compressor down low? or just put the alt on the DS and the compressor on the PS.

[@turnipgreen2869]

Dont forget your fly wheel bolts and shes looking good .

[@Gibson63.]

👍 flywheel bolts were tighten thanks for watching

[@hermyherm365]

Looks good man ! I was wondering where you been as always señor I love the vids man !

[@Gibson63.]

Hermen Lomas thanks man

[@jefflindsey9589]

Good stuff brother!

[@bobbyelee6549]

Great job you guys!!! Love your videos!!!! From here in east Tn!!!

[@Gibson63.]

bobby elee Hey man thanks for watching

[@TheCalvin034]

Looking great!

[@rudyalonzo5371]

Merci du partage de la vidéo, je aime bien la mecanique super boulot.. bonne continuation. 👍

[@BriantWoodworks]

Nice truck!

[@Gibson63.]

Thanks man

[@rheaghen]

Looks good!

[@tomtomsolvic]

Looks great!

[@jamespinckard4210]

The breather would look good anodized black on top of the chrome.

[@Jimmythekid007]

Looks like a nice truck .

[@chrismunos7741]

Very nice work!

[@punkinsgarageandpaint8299]

Thanks for the video. Great as always.

[@MrHevyshevy]

Love the air breather.

[@Gibson63.]

Yeah that’s a lot of chrome going on there but I think it’s pretty cool

[@lilpoindexter]

AWESOME!!!!!

[@randysimpson6170]

Looking good, Have a Happy Thanksgiving

[@dustintalley6607]

Love the vids! I'm rebuilding a 1960 c10 and I'm going to swap the i6 out for a 350. The i6 is mounted from the front. Any suggestions of how to properly measure to drill holes for side mounts?

[@HollisLawnServiceLLC]

Looking real good 👌

[@gnarcycle]

Gibson, all business no bull shit.

[@stephenlmckeown1439]

Big milestone 👍

[@randelclawson7695]

Yeah definitely looking good. Those holes in the valve covers are for breather caps I assume?

[@Gibson63.]

yes breather cap and to pour the oil in

[@dividedregions7351]

Badass!!!!

[@Roadglide911]

I used the same motor mounts. Did you have any cab/distributor clearance issues? I put a BB 496 in a 67 but cab is off awaiting sheet metal and paint. How much you charge me to repair my cab? 😁 I’ll deliver. It would make you a good video. A money maker. 😁

[@marcolavergne9837]

Wondering where did u get the motor mounts and transmission mount? Im putting a 350 small block with a auto turbo400 transmission

[@Andre-sv5mn]

I'm ready to put my 350 and trans in and need to know what flex plate did you use

[@Raydawg]

Beautiful! thank you for the video

[@timwood9631]

love the video doing the same on a 61 Apache. need link to motor and trans mounts please

[@timwood9631]

anybody know a link to these motor mounts

[@GBassJones]

Woah woah woah! Scratching everythin up! haha. Still, looks good!

[@Rockinruffhouser]

I got a 65 c10 stepside that id like to turn into a v8.

[@gingerwegner9984]

Did you use a long or short water pump? Where did you get your pulleys? Is this a 2 belt system or serpentine?

[@HollisLawnServiceLLC]

Hey man I know this is an older video but what drive shaft did you use? Or did the original work in it?? Thanks and great work!!!

[@perrywe1]

That engine looks great. Love that Chevy Orange. What kind of intake did you put on it?

[@MrFireman164]

Looks awesome

[@venustianocarranza3182]

What headers did you use

[@jeffreymurray65]

what year 350 will fit and is a LS setup different

[@zzzdogutube]

thanks

[@abelmaldonado6643]

What brand are the motor brackets?

[@lifestylemodificatio]

I was just reviewing your last videos and wondering what's next n here u r... I am working on my 64 n cannot keep up with your speed. How do u get the time n energy

[@seventimechamp3610]

Very nice

[@zandercroom7547]

Where did you order the mounts

[@tonywillridge2848]

Hello Mr. Gibson, I'm working on a 1964 GMC LWB and was wondering where you ordered your suspension parts, engine mounts and transmission cross member. would like to freshen up the frame on my truck and you made it look pretty easy.

[@Gibson63.]

Tony Willridge suspension parts came from (early classic enterprise) Motor and transmission mounts Came from eBay

[@bpa3697]

I'm ready to put my tranny and motor together I was just curious to find out what type of torque converter you're running I bought the truck with a rebuilt transmission supposedly, and I have no idea what the stall is so I'm thinking about replacing it and I don't know what type of stall to put in it it's a stock 350 with a mild cam. Yours looks great I wish I could get mine to look half as good as yours...

[@kennethray4669]

What ring &pinion did you run in your axle

[@cantinerosvp]

Who did u use for parts

[@lorenzohowell3863]

Did you have to change the floor pan to get the transmission clearance?

[@Gibson63.]

Did not have to change the floor pan transmission fit right in

[@klasiko2455]

Cool

[@MrHevyshevy]

And valve covers.

[@diversedad7954]

I just got a 66 swb with same combo in it but my driveshaft is a little too short. Is there a standard oem shaft i can buy that fits these?

[@Gibson63.]

I used the original length drive shaft in this truck, I also installed a different tail shaft on this transmission

[@diversedad7954]

@@Gibson63. maybe a different tail shaft or some type of slip yolk are my answer. Thanks for the reply.

[@lorenzohowell3863]

Did you have clearance to get the distributor in?

[@Gibson63.]

Yes no problem

[@petejoseph8257]

I would have put the Distributor in first.

[@glennmiller9031]

sweet

[@marcusmccomb1789]

Is that por15 on the frame or actual paint?

[@Gibson63.]

Not por15. just primer and paint

[@salahsalaymeh4864]

have you ever worked on a 327 i got a 63 c10 that came with a 327 and im taking it out this week do you recommend anything?

[@Gibson63.]

Don’t know too much about the 327 engines what are your plans or are you going to rebuild the 327 or put something else in it

[@salahsalaymeh4864]

@@Gibson63. i am attempting to do a rebuild on it.

[@Gibson63.]

Salah Salaymeh cool deal man just take your time and double check everything shouldn’t be rough to build thanks for watching

[@lewislewis4917]

Wow that hammering got loud lol. Had the volume up to hear above idialing trucks

[@blake1995]

Lewis Lewis what

[@lewislewis4917]

@@blake1995 lol. Guess it wasn't really clear. I had volume all the way up because I had loud trucks idialing next to me. When the video sped up and he started to hammer that hammering got extremely loud. All good. I turned it down then back up when he talked

[@user-tk2td9lr3i]

💪

[@richardreagan6365]

Do have a part number for those motor mounts?

[@richardreagan6365]

And the trans crossmember

[@imjoshuacase6335]

Where did you find the valve covers?

[@Gibson63.]

I'm Joshua Case A place called PML out of California

[@randysimpson6170]

Who did you get the motor mounts from ?

[@Gibson63.]

I ordered these mounts off eBay thanks for watching

[@briangentsch4033]

westernchassisinc.com/1963-67-Chevy-C10-C20-Truck-Tubular-Engine-Mount-Brackets-V-8/