3D Ceramic Touch Sio2 Spray Coating. Is It Worth The Time And Money?

Today, we take a closer look at 3D Ceramic Touch Sio2 Spray Coating. 3D Ceramic Touch is an SiO2 formula designed to create extremely durable protection and superior shine. 3D Ceramic Touch is an easy-to-use, spray on coating that will leave your surface with intense hydrophobic properties and protected from harmful contaminants.
3D Ceramic Touch Sio2 Spray Coating....www.amazon.com/s?k=3D+Ceramic...
DIRECTIONS:
-Fully wash, dry, decontaminate the vehicle.
-Paint correct if necessary.
-Spray 3D Ceramic Touch onto the surface one section at a time.
-Allow to sit for 30 seconds.
-Buff away using a clean microfiber towel.
-Continue around the entire vehicle.
3D Ceramic Touch features an advanced coating formula that not only provides paint protection, but also some serious shine. This formula provides intense hydrophobic properties, allowing water to bead off your surface, rather than sticking around and creating spots and streaks on contamination. Not only that, but you can drive with peace of mind knowing your paint will be protected from contaminants on the road, such as nature, road film, dirt and more. All this while still seeing nothing but a shining surface of clean paint.
Data sheet and resource page for products by Henry Freeman! docs.google.com/document/u/0/...
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodet. .
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 94624. .
#3DCERAMICTOUCH #ceramiccoating #autodetailing

[@kirbyschneider4187]

Thank you for explaining reactions that sheeting products have!

[@chriskiefer5132]

Another honest product review, thank you.

[@apexdetail85]

Thanks for watching!

[@bigdweeb7829]

Awesome but too expensive, I would take Gyeon Can Coat over this. :)

[@rooboy99]

Didnt see anything about this video that made me want to buy it. Appreciate the video

[@apexdetail85]

Nothing about using would make me want to buy it again. They have better protectants.

[@thestigisme2349]

I believe Jescar Ceramic Spray Wax ( formerly called "Bead it")at $18 made it through all the wash rounds and 3 traffic film rounds before going from a "beader" to a "sheeter" about 2 yrs ago making it far superior to this 3D product.

[@MrKennyanders]

I wish you would do Can Coat again in this newer format

[@MNpicker]

Another good one......for the mower👍

[@oursulaert]

Thanks Brian

[@alexisamtosta]

Being a person who never used none of these type of products, it does seem to be a very good product. I cannot compare this one or others because I have never used them

[@bigd9848]

For the preparation I would use a real good coating.My opinion not sure what everyone else thinks 👍🏽Another video for the library thanks Brian

[@apexdetail85]

I agree.

[@MyGuyKirby]

Interesting observation of using ph neutral soap for sheeting products

[@johnpivovarnik9678]

Hi Brian I put it on a Dodge truck about 3 months ago it seems to be holding up fine. It’s only been washed about 3 times don’t see any water spots on it the dirt comes off in the rain. I only used 2 sprays on a panel 4 on the hood and roof a little goes a long way. I think I have enough to do the truck again.

[@richardseem7948]

So much for that 1.lol.had high hopes 4 this product. I think EVERYONES questions were answered in this video. B well good friend

[@richardseem7948]

Awesome video and product review good friend

[@apexdetail85]

Thanks so much

[@spencerb3429]

I really like the new test panel! How did you end up finding something that was split color? Cool to see the contrast on the application and wipe off

[@apexdetail85]

Half the hood has colored PPF. It gives us an idea on how these products protect paint and ppf which is becoming very popular.

[@larrydavisj]

Not that impressed. I have a habit of always referring back to all the videos when Seal n Shine beats a lot of entry level coatings and sealants in the 10 wash test etc.... Sometimes it lacks in gloss, but pulls through in longevity and other areas. Price being first and foremost. Great info as always.

[@laurapalmerTDGE]

The Adams range does much better than this, and much more for your money! Now 3D has very good products that I have never complained about. However, the above is no added value. TAC System Shinee Wax too.

[@jperez7499]

Brian, Wow you just saved me some cash. Please review their 3d Ceramic Coating. Thanks.

[@apexdetail85]

Will do!

[@jperez7499]

@@apexdetail85 Awesome!

[@yanniobkirk5744]

Their ceramic coating is the real deal. 2+ years going strong.

[@neilwalker5041]

3D is a great company who makes outstanding products. I can see this product working perfect as a topper or stand alone if you avoid car washes. I love beads as much as anyone but I also do not like water spots. The rain here in Nashville can leave some nasty water spots which sours the water beading products. I will trade gladly trade for sheeting which keeps my car much cleaner. Thank you for the video.

[@orthodox1717]

Thing of it is, it doesn’t sheet all that quickly as it is. I like 3D a lot, but not impressed with this product at all.

[@apexdetail85]

I enjoy 3D...but this one...I will pass.

[@om3973]

Hey brian just wondering I use bilt hamber auto wash and auto foam do you think the rust inhibitors in auto wash really help if you have used it

[@apexdetail85]

It is honestly really hard to tell....I would hope so.

[@johnmelling9950]

It didnt stop my 30 year old Supra rusting. When i got it, there was a tiny bubble near the back window. I never drove it in wet weather and it was garaged in winter. Only ever washed with Autowash and the rust bubble spread to 3 times the size in 2 years.

[@Carlos.Rivera]

This against Gyeon can coat

[@jonschmunk7719]

Protekt for the win!

[@apexdetail85]

YES!!!

[@gabevillarreal96]

Not a fan. Either be a great fast sheeter or an ultra strong beader, being both at an average rate won't sell especially for 40$ plus! There are sooooo many better options out there from over the counter to Brian's very own line that out perform this for less.

[@royaltyautodetailing]

What gsm towel do you feel yourself reaching for the most on a daily basis when buffing off these spray coatings?

[@rooboy99]

Edgeless 300 are good for buffing off spray coatings like gyeon can coat. They're cheap and u can still use for general cleaning afterwards

[@apexdetail85]

300 or lower.

[@royaltyautodetailing]

Hmmm I’ve been leveling 300gsm than buffing to perfection with 420-500gsm. So your saying I don’t need to buff with a plush higher gsm?

[@carlhunsicker9585]

Waste of money for me. Thanks for your time and info.

[@johnketuroskey6293]

morning my friend.....when i saw 3D i perceived this was probably going to be a good one. Not impressed as i am sure u weren't. i am sure u did them - gloss reading - but they were prob not impressive.....which is why they were not shown/included in vid. thanks for great info......be well stay safe my friend. as always give sissies jowels a good shake for me

[@MSRez95]

This versus Cancoat, which is going to give better protection and longer?

[@nachomandetailingservices1057]

Can coat

[@orthodox1717]

@@nachomandetailingservices1057 without a doubt!

[@apexdetail85]

Can Coat....hands down.

[@nachomandetailingservices1057]

🤔 that’s a pass for me. Not very impressive compared to others. Wow not for price that should be like 12.99 a bottle. Probably best to sale that at Walmart 🤣🤣. But I do thank you for taking your time to review and test for sure. Love the video. 👍🏻

[@dtna]

What GSM MF towels do you use to buff this coating off?

[@apexdetail85]

300 or lower.

[@johnpawlowski804]

Where did you find a half and half hood?

[@damiang1179]

It’s half ppf

[@johnpawlowski804]

Well PPF isn’t paint ,

[@apexdetail85]

More and more cars are using PPF....we get to see these products behaving on that material as well.

[@lifeofbrian9511]

🙂👍🏻

[@robhill8197]

Brian, that red is really no good for us on the viewing end.

[@apexdetail85]

Thank you for the feedback....noted.

[@therealmatthewsmith]

Brian you know I love your channel. That is the fugliest test panel I have ever seen! 😂 I really hope you painted it for science and it didn’t come off of somebody’s tax stimulus Chrysler looking like that.🤣

[@apexdetail85]

Lol...Half the hood has colored PPF. It gives us an idea on how these products protect paint and ppf which is becoming very popular.

[@GSP-76]

That was disappointing... especially for the price. The graphene sprays are much better and cheaper. I'm applying the 303 twice a year and it's doing great.

[@royhale7283]

Is it 9h ?

[@apexdetail85]

Not even close.

[@royhale7283]

@@apexdetail85 thanks for the reply Brian. Love your videos, I’ve learned mountains of info from you.

[@darkman8022]

Wow won’t try this one

[@AntEloftheHouseofEl]

Wow. Even being highly PH, I'm seriously disappointed it couldn't even last one hit of Surfex HD! Very, very disappointing! I'm sure Gyeon Can Coat Evo could do better than that!

[@orthodox1717]

WAY better.

[@factsoverfeelings21]

3rd since the 1st 2 are confused. Hahaha

[@1stfrompuertorico568]

😄😄😄I got 1st by seconds almost a minute

[@factsoverfeelings21]

@@1stfrompuertorico568 Hahaha

[@MeliorIlle]

TW still better than any of these products.

[@supraman20]

Pretty disappointing. I think I'd rather just stick with 3D Bead It Up.

[@betametabravo3547]

First

[@mikeyp2447]

Too much work for the results.

[@djcelestial86]

Honestly 3d is kinda trash if you're really looking to do some correction. I have both the 3d 2 in 1 and 3 in 1 and they both do NOT correct

[@orthodox1717]

3D 2 in 1 and 3 in 1??? Never heard of these.

[@djcelestial86]

@@orthodox1717 the one car scratch remover.

[@1stfrompuertorico568]

1st

[@jayquezada3412]

This product is a rip off no shine no slickness