Рет қаралды 352
This is an additional part to the kit, you do not have to purchase this, you can run it with original motor with no problem.
Link to product:
mademe.co.uk/product/baxter-m...
The kit consists of:
A coreless motor
A flywheel
A shaft adapter
A motor holder/mount
A back-head.
You will need various tools to remove the old worm, a gear/worm puller, or old fashioned force like a vice a pair of pliers and a 1-1.2mm metal pin and a hammer.. you will need, either cutting discs, junior hacksaw, files, and drills, 0.95-1mm.
You can add if you wish DCC, and a Firebox flicker.
There is a marking on the top of the motor to show a positive terminal, if you look at the model from the back the positive should be on the right hand side.