3D print toys SKS blowback kit

[@zvc_3DPrint]

Purchase link ： 34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1 cults3d.com/en/users/zvc0430/creations

[@fortunatebum]

Impressive, I own a SKS myself and a lot of the parts look just alike, I did notice you put the recoil spring at the back of the cover and closed it. The real spring is so heavy that I’d be amazed if someone could pull that off.

[@captainknuckles652]

@Knight-Sgt. Reyes I'm guessing the sks has a lighter bolt assembly, and needs the heavier spring so that it doesn't bottom out

[@KA-jm2cz]

Sks is short stroke ak family uses long stroke. So basic system is different.

[@someguy5444]

@Knight-Sgt. Reyes change your damn recoil spring out for a new one! Like I promise you the springs you find on older AKs are usually the original one so it’s probably worn out baby.

[@bongboi2831]

My spring is not that tight, but i have gotten a squib load on mine idk if it cuz i put it in backwards or what

[@someguy5444]

@@bongboi2831 I didn’t know it was even possible to get a squib with an AK, like that’s honestly mechanically impressive. Just get a wolf +15% and never worry about it again baby.

[@PrecioustheMovie1]

When you pulled back the bolt my brain tricked me and I was expecting metal sounds. That’s how good this replica is. Bravo.

[@michelepiperno4310]

Eh bravo si

[@donovanyobech5098]

This guy needs to either make a toy company or join a toy company this stuff is so good!

[@gyorgischwartz]

a toy?

[@chimpgaming8290]

@@gyorgischwartz yes

[@marceldewit8159]

I would buy these replicas

[@whitehuayra]

@@gyorgischwartz it's made of weak plastic lol can't be used for anything else

[@tomwithatophat6457]

@@whitehuayra I mean if you wack people hard enough you can make it into a real weapon

[@asdfg2560]

As a Canadian gun owner this brought a tear to my eye

[@codmobilecodmobile3088]

imagine not having a full auto ak or full auto Draco ak pistol just move to america if you want better guns and guns that are not just semi auto

[@loganbaileysfunwithtrains606]

@@codmobilecodmobile3088 you must have a lot of money in order to pay for those ATF NFA guns and keep them registered

[@plasticfirearms7772]

I'm amazed how you print so neatly... All the details fit perfectly with almost no post-processing. What plastic do you print with and what settings do you make?

[@zvc_3DPrint]

It also needs to be polished later. I just keep printing and testing to keep the tolerances as small as possible

[@guy_in_ashopping_cart-sfs967]

@@zvc_3DPrintim extremely impressed with your designs and 3D prints, im just curious what’s your favourite 3D printer? as I have a flashforge adventure 3, a elegoo Neptune X, a anycubic photon mono X and the absolute trash anycubic Chiron, And also what’s your process for polishing prints? Keep doing what your doing bro and you got yourself a new sub🤙👍👏👏👏

[@bigpat_4295]

@@guy_in_ashopping_cart-sfs967 why do u have so many printers. And what is the cheapest viable one¿

[@jestnutz]

@@bigpat_4295 I would say ender 3 for price and quality. Alot people vouch for it.

[@codym5352]

@@jestnutz I used to be the 3D printer guy at the Chicago Micro Center. The amount of ender 3s I sold is obscene. One day alone I sold 15 to 15 different people and we had JUST gotten them all in stock that morning, I used the CR-10s cuz of the larger print size, but Crealities are great, upgraded to the Snapmaker 3 in 1 tho

[@taco5023]

Someone needs to start manufacturing stuff like this. Me and my buddies would definitely buy a couple to have fun with.

[@bretttobin9632]

I was thinking the same things, toys for all ages.

[@pixellime13]

airsoft is a thing bro

[@Noeland]

Buy an Ender 3, print one!

[@peris_arts_film9699]

Nah I prefer my Yugo SKS. Just a bit more affective 😉

[@c1ph3rpunk]

Buy an airsoft one.

[@ScarrednCharred]

I don't know anything about 3d printing, but I do appreciate it. The sks is a wonderful little work horse. Thank you for your effort and look forward to seeing what's next

[@ILikeToLaughAtYou]

This is a level of engineering I will never comprehend.

[@yelectric1893]

Outstanding. Just beautiful, and you pulled it off with accurate designs and tuned printing

[@zvc_3DPrint]

🙏

[@yavehsuarez9392]

Kid me would have been so hyped if I got this for Christmas

[@stevewilliams2895]

if i grew up on these instead of nerf id be a tier 3 special forces operator by now. seriously great work my man these are incredible

[@gunterg7309]

This video really helped me feel like a Chinese factory child who made type56 rifles, thank you

[@jonsmith5050]

This is a very detailed interpretation of the Yugoslavian sks! Even down to the night sights! Very, very impressive indeed!

[@BrainChild1542]

As the a owner of an SKS love seeing this , keep it up

[@thewarnerCHANNEL]

Dude you could make some serious money off of this talent. Not only be a cool toy, but could be a very good training tool for tactical uses

[@FullUhFools]

Crazy how far 3D printing has come. Gotta be more ideas out there too. Maybe even rare car parts that are impossible to get ahold of anymore.

[@codmobilecodmobile3088]

yeah criminals are using 3d printing to make ghost guns so they dont have to worry about guns being traced

[@kkrrzzyycchhuu88]

thats awesome! the world need mass production of these toys immediately

[@harrymarquez5931]

I have a SKS with a pistol grip and a banana magazine. I adore it !

[@digger7601]

Now try to make cap firing version with blowback. Japanese cap firing guns might be a good reference.

[@RookieL021]

I have no idea why KZbin suggest this but I AM AMAZED

[@TroySain]

It even light strikes and does not cycle just like a actual sks. Bravo

[@mojhobi3521]

Im happy to see something like this exists! Im following your great work I can't wait to see some conversion from m4a1 to hk 416 :)

[@zvc_3DPrint]

maybe future

[@dullvoicereader]

shut

[@enclavegeneral2077]

@@dullvoicereader no you

[@barelyunderstandable4117]

Bro this is so good for safety training or just learning how to use a new weapon system without having to manipulate a real firearm!

[@rosaria8384]

This is what I thought as well. Having the blowback system is also a good way to begin simulating live fire without having to spend a ton on real rounds (they can really get expensive per round, especially with old antiques that Prvi Partizan still makes for example)

[@MONTANI12]

a martini Henry would be crazy! Crazy looking gun btw, looks awsome!

[@ColWalterEKurtz]

I would have treasured something like this when I was a kid.

[@phoebe3122]

As an SKS average enjoyer.Thank you for this.

[@zvc_3DPrint]

🙏

[@rumpleforeskin5064]

love the background music. love the sks

[@_blood_moon_proto_1500]

amazing, absolutely amazing, definitely going for the sks for my cosplay, actually couple small questions, does anyone know the uk comic con rules on props this detailed? and finally do or would you be able to take a commission for a pistol? i would try and make one myself, but i also lack the experience, information and knowledge on how to make something like the pistol i seek

[@PrograError]

i suppose presume not, unless you asked... (my country is hardarse on firearms)

[@JustaGuy1250]

You could ask if deactivated guns are allowed

[@_blood_moon_proto_1500]

@@JustaGuy1250 i would, but airsoft pistols are not allowed, even if they are broken, but the line is blurred when its almost entirely plastic and you put it together/made it yourself

[@_blood_moon_proto_1500]

@@PrograError uk? level or otherwise? cus the rule i have to figure out is realistic props must have something that makes it clear that it is a prop, problem is to stick a red/orange cap on the end will not work with the detail this gun has when taken under the rules props made from broken airsoft guns, its tricky sadly and considering the nearest one to me is in Cardiff, there is a lot that could go wrong

[@pteppig]

@@_blood_moon_proto_1500 Vote for some politicians that gives you your rights back. But considering the lockdown policies... Not much democracy left there

[@TehFalKii]

I would love to see a DP28, even tho I can imagine the work to pull that off in 3D. Great work man!

[@janhammekenbuch142]

I'm going to need one, just on principle.. That is some excellent work.

[@astorathgrim4257]

Brilliant blowback such a cool little feature are you planning the same for the m1 garand you did or is it a case of the sks had more room to play with to pull it off?can't believe the quality of the rifle as well its beautiful well all of your guns are for that fact loved the peacemaker revolver you did although would have loved to see you do a lemat revolver more that's a beautiful Western gun especially if ya did the westworld man in black version that's such a cool looking gun. Great vid keep up the good work

[@nd002723]

+1+1+1+1+1

[@zvc_3DPrint]

well be make blowback for M1

[@aethertech]

The tune sounds very familiar...like I've heard it all my life... *checks source* Ah, because I have. lol. Interesting take on it.

[@jeffthompson1530]

someone has a future in the firearm manufacturing industry

[@Cheese-pt6wp]

Almost internally exact as the real one, its crazy

[@gunsmoke132]

Crazy stuff man! You should make a Galil Ace next!

[@rosaria8384]

This blowback kit is a good start! Hopefully in the future new models can have a kit for semi auto fire.

[@zvc_3DPrint]

👌

[@lukehouchin2887]

I need one! You did a great job!

[@Bizzon666]

Beautiful!! Both aesthetically and technically

[@JustAdude291]

I Got excited and thought that I should make one too, but then I realized I don't even have a 3D printer nor the knowledge to use one lol

[@DUKWAK]

That’s pretty slick, dude. Very cool.

[@stevemc6010]

That clip-loading is much smoother than my real Zastava lol

[@ColterSnedigar]

My Zastava m59/66 hates clips with all its non-existent heart

[@frenchfrysz6695]

Nice replica! Yugo's are my favorite pattern.

[@spudnickuk]

awsome. and glad i have seen your video as forgot i purchased some of you guns. and i downloaded again as some parts were very difficult to print, meaning they came out so fragile that they broke. and now i have another 3d printer i will try again and see what the outcome achieves, just to say you are very clever person and glad to support you.

[@zvc_3DPrint]

🙏 thank u for ur support

[@therealericjackdaniels]

Fantastic job. I watch and wonder how close the parts are to the real thing. Very cool. Would have loved one as a kid.

[@real-vb8ou]

some of it is close but the firing pin isnt for sure

[@derpythespy]

It is so amazing to see content like this SKS as a toy is not as easy to come across as one might imagine... might i suggest a single shot rifles such as Martini Henri or Rolling Block? I do not see much of a single shot rifles used by major military on this channel and it'd really make it a cool content.

[@jasonrogers8360]

A martini henry would be amazing. Youd get all the Zulu and Crimean war nerds in a froth for sure

[@tapist3482]

Yep. Many infamous and sometimes widely-avaliable firearms don't really get "airsoftised" very often, usually never... Such a shame.

[@PaulKruskamp]

Dude knows his way around an SKS.

[@Iceman8723]

Nice paperweight... but I appreciate the effort involved.

[@winterghost96]

You have just earned a subscribe from me! Keep up the good work in the future 😀

[@zvc_3DPrint]

👌

[@detroitandclevelandfan5503]

Why can't my nephew have toys likes this today? By the way I love my yugo sks.

[@Vyperchannel]

Its crazy how its mostly made so identical and close to an actual SKS, the Reciever and the inner components

[@chance4513]

dude your future kids are gonna love you, damnn

[@nightdweller2902]

This would make a great movie prop.

[@DBSG2]

This needs to be on sale, I’ve never actually seen a toy SKS until now

[@warmasterraven1447]

Okay this is sick AF! Could we get one for the AK next?

[@MainMenu_]

scav gun for sure missfiring like that XD amazing work nonetheless!!!

[@jointaimbot55]

As a multiple SKS owner this looks like it would be functional if it was made with metal

[@boguslav9502]

honestly looks like its basically just the rifle with some parts modded to make it work as a toy. smart stuff in general

[@loganbaileysfunwithtrains606]

Impressive, I have an actual Yugoslavian SKS which is what this is based off of and this is very accurate to the real rifle

[@millennialmongoose3392]

now i want to start printing replica airsoft guns awesome set.

[@nilsmadej9091]

Sks is one of the best looking auto loading rifles, this just makes the prop so much better. Are you planning on giving that feature to more of your guns? And I recently saw your attachments to other weapons, do you think you could make a PASAM kit for the mauser c96?

[@zvc_3DPrint]

This is too niche. may not be produced any time soon🙏

[@nilsmadej9091]

@@zvc_3DPrint too bad... Thanks for the reply!

[@andrewlawrence6357]

Cool now print some stocks up and sail em!

[@cadetcondog6482]

I’m kinda curious if you put a real round and attached it to a spring just to see what would happen if you added a primer.

[@rafaeltoledo2310]

splendid work ! please make an mg42 or an mg34.

[@zvc_3DPrint]

maybe future

[@desertsmeagol7073]

Or an M60

[@rafaeltoledo2310]

@@desertsmeagol7073 😎

[@mike_magnet_fishing]

Very very cool video definitely impressed

[@cujemi55]

been waiting for an airsoft SKS to come out some day

[@zvc_3DPrint]

In testing, the effect is not ideal 😐

[@chrisdetrin7359]

now i want to print 2 of these for the kids.

[@VODZ]

Well done, exactly like a Yugo 💯

[@unlimited6964]

I love this so much and I hope you make more

[@Shadow_Hawk_Streaming]

so it works like an OTF style pocket knife? nice

[@stormrunner9435]

looks just like my yugo sks. really cool

[@안장부리황새]

Blowback and boltstop. Cool

[@Sabel12]

Why dont they sell stuff like this in the toy store. Im sure my daughter would love this for her birthday.

[@zvc_3DPrint]

😅

[@shionohara3436]

Noice build, just going to say a certain country will be using equal quality toys if the event keeps going

[@ThatHungryAfricanChild]

You know what would make this cooler? If you add thin layer of hard metal like steel along the sides of the moving parts to give it a more metal like sound. Its looks really cool but the toy like plastic sound kinda throws it off for me

[@MOE13576]

"Toy like plastic"..I mean it is a plastic toy after all

[@ThatHungryAfricanChild]

@@MOE13576 yeah duh but its got all the moving parts like a real sks so its a realistic toy it would just be better if it sounded more realistic too

[@cattyconvict2428]

Could you try making a Remington Roiling block rifle? It’s my favourite gun and I think it would be cool to see you make one Always love to see one of your amazing builds on my home page, keep up the incredible work!

[@Espirivit]

Now we need this for the m-4 and the akm.

[@zvc_3DPrint]

will be made future

[@Trunkeddetcord995]

These toys are getting better and better considering you can 3d print actual guns this isn’t suprising

[@imadequate3376]

Ok, that's rad. I like my real one. But this is a great trainer for my kid 😅

[@Leman.Russ.6thLegion]

I own a few sks and i love this.

[@Skrillful]

Nice, I own one IRL. It's a Chinese Type 56.

[@MrLandslide84]

Omg. Graceful.

[@forestbrother7772]

Very impressive!

[@ThomasRonnberg]

Very clever mechanism

[@matiasdelatorreoverton3612]

This is perfect for film making

[@StudioSlam]

I had an idea for better movie prop guns that could be built by hollowing out airsoft replicas, making them cycle dummy rounds, having programmable led lights at the ejection port and barrel (to match the temperature of the scene) as well as a vape device that pumps vapor out of the barrel and ejection port

[@recroboi1388]

I'm glad I found this

[@hinnifreaxxx]

hey i think a welrod or VP-9 would make a cool model

[@ulungprabowo]

I cant wait the blowback kit for AKM! I wish you will make it

[@zvc_3DPrint]

will be made future

[@TheEveryThingGoober]

this is pretty cool!

[@021kangaroo]

Itd be cool to have a spring loaded casing that launched the plastic round but I know it'd be very difficult to engineer prolly

[@zvc_3DPrint]

quite difficult，need to take into account the balance of the spring force of each component.

[@billdberger7407]

I'm having trouble visualizing your blowback mechanism, could you do a video on that specifically?

[@jorisprenger9003]

Nice job! Maybe a M1 garand blowback kit next

[@zvc_3DPrint]

maybe 😉

[@NexusEhh]

Since you’ve already made winchesters before, could you make one for the 1895? Specifically the Russian contract variant?

[@abx42]

damn this is sleek I think i need to order 5 of em lol

[@guy_in_ashopping_cart-sfs967]

Just wondering how many individual prints is in this gun? Because i really want to make it but I only got 2 good FDM printers, 1 pretty trash FDM printer that I wouldn’t really trust for this and 1 resin printer and I don’t want this to take a month? It looks so awesome tho great job👏👏👏🤙😍😍😍 BRAVO👏👏👏

[@robertmunoz7543]

Spock says "fascinating"!😂 Jman

[@mikeelder6298]

THAT IS TOTALLY AWESOME

[@lilgnono]

I think you can get rid of that plastic rubbing noise with graphite spray lubricant it’s just gonna be messy tho.

[@jerrythethird6481]

That’s pretty cool

[@ShadowAssassin-vb5up]

I thought it would actually shoot the bullets out the barrel not the side but I guess you can aim your gun sideways at your opponents at close range and pull the trigger to get them but it won’t do as much damage sadly