3D printed Breeze model X - Building Tips

This is a long one... but should hopefully help those a bit that want to build their own Breeze Model X - 3D printed FPV wing.
Thanks and Kudos to Dr. J. Ma ‪@majianjia‬ for designing and sharing this awesome designed wing!
The files and manual can be found here makerworld.com...
‪@soarkraft‬ Has also got some very useful printer settings (and a lot of good knowledge) that we used to print our wings: soarkraft.com/...
An example for CA hinges - you can probably get them from your local hobby shop: www.rcworld.co...
Additional notes:
if you copy the suggested settings you need to know that the weight is not set to INAV standard for wings (which will reverse 2 of your surfaces)
This is the setting with the weight set with the standard weight/direction and 30 roll / 60 pitch:
Mixer: servo mixer
smix reset
smix 0 1 0 30 0 -1
smix 1 1 1 60 0 -1
smix 2 2 0 -30 0 -1
smix 3 2 1 60 0 -1
Parts I used for the build:
Filament (any brand should work):
Bambulab PLA Aero
Bambulab PETG standard
Bambulab PLA standard
Servos: Digital 9g Metal Gear SPMSA347
Motor: Brotherhobby 1504.5 3950KV
Prop: Gemfan Hurricane 3630-3
VTX: Walksnail 1-3S Nano V3 with HD V2 Cam (with gyro)
ESC: Zohd/Sonicmodel Drift 30A 3-4S ESC
FC: Speedybee F405 Wing mini
Lipo: Swaytronic 3S 35C 1300mah
#bambulab #3dprintedplane #3dprintedwing #fpvwing #rcwing
#walksnail #plaaero #lwpla #digitalfpv