3D printed FPV plane : 1

[@FPV420.]

Looks exactly like my Lidl Devil plank. I can't wait to see yours in the air.

[@tinybloodywonder]

OMG 3d printed goblin!!! I can't wait to see it fly!!!

[@Olivier-C]

As do I ! Im fitting the electronics right now, might in 1 or 2 days

[@TheWilliam1916]

Thank you for your custome parts, which is well designed & figured out!!

[@GarbachNL]

Looks like a very well designed plan. Looking forward to your test flight!

[@OZSCQUADS]

so cool. Look forward to seeing more of this one and finding out where to get the stls

[@alexcook4851]

Brave! The goblin isn’t easy to handle.

[@Olivier-C]

I've heard rumors that it's a tricky plane yeah :)

[@patricehonvault2612]

Ce modèle ressemble beaucoup au planeur "Lidl" modifié par de nombreux modélistes un peu partout dans le monde. Concernant les fils entre les pièces, certainement le paramètre concernant la vitesse du retrait à optimiser. J'ai hâte de le voir en vol.

[@mr-huggy]

Looks a nice build. I wonder if spraying it with 3m 90 and laminating it would help to give it a bit more strength and hold the parts together.

[@Olivier-C]

That's an idea yes, also I wanted to make a test with a thin layer of polyester resin on some spare parts, curious to see how heavier it gets tho

[@GarbachNL]

Pla starts deforming at 70C or something, so laminating might be too hot for it?

[@jotham123]

@@GarbachNL i wouldn't go higher than 50c.

[@maybayson4203]

Strix goblin?

[@Skyglide]

Replica)

[@skydragon1966]

They make an adhesive called 3d gloop specifically fpr pla and 3d printed parts, have you tried it??

[@Olivier-C]

Thanks, I write that down, for now the CA glue seem to hold quite strong, but I don't know how it will age., will see

[@ebikefe]

How did you separate the elevons from the wings? You printed them separately? They are attached in the original STLs. I like the modifications you made at 10:42.

[@MrZeek101]

I've printed one just like this one to Oliver it's almost the exact duplicate of the ready-made RC goblin at :43 it's the orange one in your picture and I am running a 2216 2200kv 6 inch prop

[@jparth167]

Sympa, Je me suis pas encore lancé pour un avion imprimé, Un Savage Bobber ou une mouette ça me tenterait bien 😉 ( a vue du coup )

[@alissonxzm]

Pla?

[@Olivier-C]

Esun Pla+

[@АнатолийМульченко]

👍

[@user-mo4ul5td2p]

sympa combien d'heure de print ??? j'ai encore pas tenté de faire ce genre de truc déprimé par les temps de print hallucinant et la pietre qualité de mon imprimante "home made"

[@Olivier-C]

Environ 35 heures, pas si long que ca pour un avion d'un mètre

[@АнатолийМульченко]

Stl?

[@Olivier-C]

Not yet publicly available I think, I'll put a link in the description once it is

[@alpinestar37r1]

What temp and speed are you printing at? I am doing 218 at speed 45. Should I bump up temp and speed? Its printing clean now but would be nicer if faster

[@Olivier-C]

Im using the profile provided by the author, in the 3MF, so the speed I don't know but it's quite fast, faster than my normal settings, and temperature is 220 -225 (recommended 230°)

[@alpinestar37r1]

@@Olivier-C Ok thanks, I am not using Cura. I use S3D as my slicer so I just set it manually. I just bumped up the temp 5 degrees and speed up 20%

[@itsfunflyingirfan6979]

Hi Olivier. Do you mind sharing the stl files for the gps

[@Olivier-C]

Ah yes I wanted to share my custom parts for the grom, and forgot. Will do that tonight, I will paste the link in the description

[@Olivier-C]

www.dropbox.com/s/lv3onig32erqmvk/Grom-extras.zip

[@itsfunflyingirfan6979]

@@Olivier-C thank you Olivier

[@beubeurk]

Salut! Super encore une fois! J’ai 1KG d’ABS qui traîne. Tu pense que ça peut le faire? Merci

[@Olivier-C]

Aucune idée, jamais imprimé d'ABS ! Faut pouvoir imprimer avec un seul trait, donc 0.4mm, est ce que c est possible avec l'ABS ?

[@p.i.engineer398]

how are the wings held on? glue or removable?

[@Olivier-C]

The 3 panels + root are glued, then each wing is removable, clamped to the carbon tube

[@p.i.engineer398]

@@Olivier-C oh yeah, totally forgot about the spar clamp, thanks.

[@fabastian82]

bonjour, pourriez-vous partager la stl des pieces qui retiennent l'antenne et fc avec le gps. ceux vus dans la vidéo. Merci

[@Olivier-C]

Salut! J ai mis le lien au tout debut de la description de la video !

[@FlyingBuzzard]

NICE