3D Printed Piper CUB Model Airplane (107cm). Print, Build, Paint, Fly, Have Fun. Free Build.

[@Rundumsfliegen]

Im going to be honest here; i was expecting some barely flying plastic thing but im really surprised (in a good way) of the building quality and looks of this cute Piper Cub. Well done, hats off to you Sir!

[@EMIRFPV]

Yes

[@yonallb]

My grandfather had a Cub back in the 50's, he flew it from Washington to Oregon to go on dates with my Grandma (he was way cooler than me:P). He also loved to and could build pretty much anything, seems like a fun project.

[@tungym]

I just buy a new 3D printer because of your kind contribution! Cheers !

[@starletzzang]

To prevent the wings from sagging due to sunlight, we recommend 1mm carbon rods instead of filaments.

[@achmadiqbal80]

It's melted??

[@andrikurniawan531]

@@achmadiqbal80 pla easy to deform under heat

[@Miniellipse]

I like that bit of cinematography where the shot is from inside the fuselage. Well done.

[@slammerf16]

What a fantastic video - thank you for answering a load of questions through making such a thorough job. You have fantastic attention to detail. Clear Skies!!

[@atamiga2491]

One of the best assembly vids ive seen. Well done

[@Tyler-o5r7o]

was super satisfying to watch

[@tf1389]

WORLD CLASS bir kanalsınız. Maşallah. Gurur verici. Teşekkürler video için.

[@sonsuzevren61]

herzamanki gibi 10 numara 5 yıldz.. süper oldu.

[@MrWaalkman]

Just started building that model. The holdup was getting a printer that could do a decent job of printing it (that being a Qidi X-Max3).

[@Gervivasio123]

Estos son los videos que animan a la gente a hacer cosas por uno mismo. Excelente material, gracias!

[@normg2242]

Brilliant... I love the filament hinges!!! Teşekkür...!

[@taphuc-dientu]

Thanks for your updated session.

[@peruccaeditz]

Another masterpiece from this man,the only channel that i don't joke with it's upload notifications 😅 good job man💓 Hats off to you,i would bring my questions later after studying the video😍

[@turkfx]

"Usta, zor olanı kolay gösterenmiş" Eline sağlık usta

[@jps99]

Nice plane! It has a lot of great design features.

[@sakiryyasar]

Prodüksiyon gelişmiş elinize sağlık 😁

[@johanopperman8039]

Wow your amazing with all your ideas you inspired me to build my own foamboard airplane. I'm going to maiden it this week. 😊

[@onurkarakaya5640]

Pilotajında süper işçiliğine üstad tebrikler...

[@bulenboncuk426]

çok güzel uçak emeğine sağlık kolay gelsin 👍

[@SC.243k]

professional work, Thanks my friend ♥️♥️♥️♥️♥️♥️♥️

[@obee1kanobee]

Really well done. Great job

[@youknoweverything7643]

Beautiful hand painting work looks good I do same thing I hand paint with sign painting paint and brushes like old school sign lanterns for my pinstripes and designs on my 3d printed planes or sometimes I'll 3d print it in the main color then paint the design on to it saves time and few bucks in paint

[@hasanrcn]

Güzel bir proje daha. 👍

[@MrAltuntas]

Sana helal olsun kardeşim

[@a.sanusinazareth9213]

Thanks for your updated session. I'll watch your later. I'm in my work LOL - I need your tutorial soooo much

[@sagnikghosh630]

First like and first view...love from India ❤️

[@TheBod76]

I wouldn't recommend painting PLA black when you want to use it outside on a sunny day! ;) Awesome build and footage though!

[@JasonChurch1992]

Great video... I am in the process of building the same Piper Cub. What yellow paint did you use?

[@robhemp5548]

excellent work!

[@AS-yh1fj]

Good stuff as always

[@cannibalholiday]

I'm having good luck printing the outer surfaces, but those little support tubes for the ailerons keep falling out on me. It's impressive how light the prints are though :)

[@serdar-bayram]

Elinize sağlık yine süper olmuş.

[@TheNerdsVolando]

Desde Argentina te felicito por lo simple y practico. Estoy armando uno, espero que me salga parecido al tuyo !

[@BerkayÖzdoğa.n]

abi videoların çok güzel inşallah çok daha büyürsün emeğin in karşılığını alırsın

[@mehmetozan74]

Ellerine sağlık yine efsane olmuş 🔥🔥🔥

[@sanjaysroy9016]

Nice video

[@taham6757]

HI i have question i might travel to turkey and wanted to fly rc airplanes there do u have any ideas what is required for license to get to fly there also the shops i can buy parts from if u can plz inform me also promodel donst have much of parts if u can tell me about more shops ty!!

[@DIYwithBatteries]

Great design man really cool 👍

[@omergumus6181]

çok başarılı bir çalışma olmuş bu uçağı uçururken kuyruk kısmına renkli duman ekleseydiniz harika bir şov olurdu elinize sağlık

[@DetectorismoItai]

very nice !!! tank you !!!

[@jensb8445]

Can you share your printing profile or printing settings? it looks really good!!

[@Kendin-Yap]

I used the S3D (Simplify3D) settings shared by the designer. I just changed the stream value. Flow value for body parts: 53 , for wing parts 54

[@MrMindaSchmit]

how do you gut your pieces to snap together so cleanly? i been trying to make this plane for the past 2ish weeks with zero success

[@3dfjunioradrover684]

I love your videos! I would like to show you my project of DIY plane mixing 3D printing + foamboard!!!

[@Kendiatölyemm]

Yine harika bir proje 👍

[@yaser_kose]

Abi iki ucu açık olacak şekilde nasıl baskı alıyorsun içindeki hazır g kodlarıyla da sağlıklı baskı almak mümkün değil

[@yaser_kose]

servonun ucundaki telin boyunu ayarlamak için kullandığunuz setiskurlu şeyin adı nedir nerden alabilirim

[@furkanomercaglar9039]

Harika olmuş

[@Evan-rq2ee]

this is awesomeeee, i might print this because ive got a 3d printer, some extra filament, and time. and i really want to start flying rc planes

[@Evan-rq2ee]

okay i downloaded the files, what do i do now, i cant open tem in my slicer, so like how does this work

[@nagasurya2307]

@@Evan-rq2ee Bro please share the downloaded file , i cant download it

[@denizvural163]

En sevdiğim model

[@hak_soyle]

Reis acaba ejderha tarzı bir uçak yapar mısın ?

[@MSM5500]

If I print this plane of ABS will it fly??? The thing is my printer cannot print PLA.

[@setupman23]

Where did you get the rudder and elevator push rod from? Can't find any long enough.

[@florivaldopereirajunior5389]

que aeromodelo lindo....parabéns!!!!!

[@ondrejliptak131]

Hello, I noticed that inside of parts there is almost no stringing. It's remarkable wit LW PLA. Could you please give some insight into settings?

[@Kendin-Yap]

There is a link below the video. There are details for the necessary settings on that website. I applied those settings.

[@GamingBrick11]

Can you use a soldering iron to connect the parts together?

[@muratadal5282]

elinize kolunuza sağlık bu model uçağı satarmısınız kumanda hariç?

[@Emr255]

kanatlarin nasil baglandigini gostermemeissiniz lastikli yeri

[@AntsRC]

Didi you use the pre sliced Gcodes??

[@taham6757]

Merhaba, bir sorum var, türkiye'ye seyahat edebilirim ve rc uçakları uçurmak istedim orada herhangi bir fikriniz var mı oraya uçmak için lisans için ne gerekiyor ayrıca parça satın alabileceğim dükkanlar eğer yapabilirseniz lütfen beni bilgilendirin ayrıca promodel çok fazla bir şey yok Bana daha fazla mağaza hakkında bilgi verebilirseniz, parçaların!

[@warbuzzard7167]

Using PLA as a joint instead of carbon fiber seems like a decision that may come back to bite you later. It’s just not resistant to much force. Why not carbon fiber or steel rod?

[@swarovski333]

Bir roket gibi bir şey yapabilir misiniz? En yüksek hangi noktaya kadar çıkarabiliriz?

[@nikemamut8668]

Mantap om

[@1972vlado]

perfect!

[@Cessna165]

Did you print this in Vase mode or Normal?

[@rcpowres]

Thumbs up!!!!

[@cabinvibesebaystore8956]

New sub! Liked 🙏🚀👍👍

[@electronic7979]

Mükemmel

[@randall4411]

That's the way you do it ...

[@polenta90b]

Beautiful, I downloaded the project weeks ago and soon the mold and I make a video in my channel, if you want to see I printed eclipson but 1.4 👍🏻

[@jansladek8149]

Tolles Video, sehr gut gemacht! Danke! Ist es möglich, dass Sie hier Ihre Druckparameter für das eSun LW/PLA zur Verfügung stellen? Das wäre großartig! Danke!

[@felixzhang8356]

Hi, quite new to rc and doing this for a school club. How did you connect/pair the remote to the controller system? Is there a general guide to do so? thanks.

[@Kendin-Yap]

This is not the same for every brand, but in general matching the transmitter and receiver is a simple procedure. Search with the word "BINDING" for the brand and model you are using. You can find many resources.

[@markuspihlajaniemi3711]

This plane model is better to me . I try first A6M2 Zero first. I manage to make it but flying wont manage. I have tryed to fly 4 times and ever time plane crash . I try to move battery but allways too hard me .

[@pianostar3998]

Any rc plane require to check air directions .. please tell me

[@googleboy7]

Hi, I watched this on my tablet. Your video is so cool I almost got frostbite from watching it. This took a lot of thought and talent to create. I am a retired RC modeler. I have been teetering on getting involved with 3D printing. Your video has pushed me over the edge! My wife is already sorry she let me watch this. LOL I have some questions. What printer are you using? What design software are you using? Where do you get filaments? I is it worth it to buy an extruder? Is there a shareware sight where I can buy designs? THANKS! Shalom/gw

[@Kendin-Yap]

Thanks. 3d printers I use; Original prusa MK3S+ and Artillery Genius. I buy the filaments from a local dealer. It doesn't matter. There are many sellers. I shared a link for aircraft designs in the description area below the video. Piper Cub is free. Apart from that, there are many sites where you can get plane designs for 3D. Some... www.planeprint.com , www.eclipson-airplanes.com , www.3dlabprint.com

[@TooooManyHobbies]

That filament is lightweight PLA. It’s a bit trickier to work with than the standard plastics for 3d printing.

[@floydburkett630]

What size 3D printer is required to print the parts?

[@youknoweverything7643]

I love my 3d printer I can litteally 3d print any rc plane I want they looks very scale and beautiful and notade out of foam of any kind and fly beautifuly and no need to monokote or pin pieces of balsa wood to plans and glue pieces of balsa wood together and spend a few .months building an amazing plane that you got 1000 dollars into and then the esc desides to have a brown out of decides to go bad and boom beautiful balsa plane or store bought 600 dollar plus beautiful foam plane gone in seconds. That's why I love 3d printing my own planes they look beautiful fly like a true balsa plane with a little weight and fly way better then any store bought foam planes. And if I crash my 3d printed plane I can just print a new part in a hour or so or just print a whole new plane in about 24 hours for the cost of 10 cents or less in plastic

[@shoodheshoodhe7903]

Your hands like a magic I think you are not human may be you are a ghost no another person make this in the intarenate

[@Kendin-Yap]

Thank you. This is just the experience of years. It's not a special talent.

[@Neocro]

KendinYap great video, and thank you for sharing your 'skill'. Can you please explain why you choose to use diferent motor 2212 (recomended is 2830)? In 'coments' someone ask you if he can use 3s 1300mah battery, you say no, but in manual recomended battery is 3s 1300mah? I am guesing, but, this is why you must use 30g of 'ballast' to get a right cg.?

[@Kendin-Yap]

Thanks.. The recommended 2830 is the same motor as the 2212 I am using. Why? :) Motor manufacturers use two different standards. Some brands use the outer body diameter of the motor, some brands use the inner rotor diameter. The value 22 is the rotor diameter inside. The value of 28 is the outer casing diameter of the motor. The outer body diameter of 2212 is also 28. Most of the big and high quality brands identify with rotor dimensions. The most accurate description is the rotor dimensions. The other is misleading. The technical values of the Emax XA2212 I use and the recommended motor are similar. Why I used 1000mah battery. The problem is not about weight. Dimensions are a problem.. The nose area of this model is very small. It is impractical for me to insert and remove the 1300mah battery.

[@Neocro]

@@Kendin-Yap thank you for 'clearing' that out. Great. Thumb up ;) I really don't wanna to 'mess' with you, your choice, Emax XA2212 is the 'best' motor for Piper CUB? And in your 'raw' video of flight with Piper CUB your flight time was cca 4.30 min? That is max flight time on 1000mah 3s battery, or you just get bored ;) ?

[@blackseafpv]

Elinize sağlık harika olmuş. Lw pla yi nereden temin ettiniz?

[@Kendin-Yap]

seninfabrikan.com/filament/esun/epla-lw/1-75/ ben buradan almıştım.

[@adrianvicente5878]

What's your settings? I've also printed the model using eSun LW-PLA but the stringing is crazy.

[@Kendin-Yap]

Settings vary by machine. You should use the settings that the designer posted on his site to get started and find the appropriate settings for your particular machine with a bit of trial and error.

[@arrie1978]

Great build, just how did you print this, can you share your printer settings, and how do you print without stringing? Thanks

[@polar1991]

You can’t print lw-pla without stringing which is why all these 3D printed plane companies use as little travel as possible. He probably just used the g-code that comes with it. I’m going to start printing this tomorrow and the only change I’m making for the ended 3 pro is the retraction in the g-code.

[@arrie1978]

@@polar1991 I was able to get great results with PRUSA Slicer, worked much better than CURA, just one last question do you print this plane wall width with 0.4 or 0.8 wall width? 0.4 seems to thin for me.

[@polar1991]

@@arrie1978 I haven’t figured that out yet. There is a guy named Troy McMillan which has a channel that is all about 3D printed rc planes and he has a video on the best settings for lw pla planes. Hope this helps

[@sebastiannoahh299]

Super job, please tell me what program you used to do g code. I see you have a Prusa printer. I am adding you to my favorite channels.

[@Kendin-Yap]

Thanks. I use Prusa slicer and Cura. But I mostly use Prusa slicer.

[@OP0740]

can i print with normal pla?

[@AdilErt]

hangi ülkede ve şehirde yaşıyorsunuz? Yurtdışında mı?

[@GriffoNZL]

Awesome build! did you print the ESUN LW-PLA parts with the 3Dlabprint provided Gcodes or did you reslice for the ESUN filament? Thanks!

[@Kendin-Yap]

In general, I used the settings specified by 3Dlab. I made minor changes to the nozzle temperature and flow settings. You may need to adjust these two depending on the filament brand you use and your 3D printer.

[@saswatpradhan7443]

@@Kendin-Yap hey can we use normal PLA instead of LW PLA

[@Aytek857]

Can we use 3000 mah battery?

[@Kendin-Yap]

No you can't. it is very big and heavy.

[@spinnetti]

Clever hinging...

[@therusticcollectionebaysto7028]

New sub!

[@AyhanErkin]

harika...

[@enesuslu8187]

İlk defa uçurmuyorsun belli ki 😅

[@EdClark-s5w]

Being that I live in a 5th wheel, don't have space for 3d printer, do you sell the printed parts for people to build their own planes. I understand I will need to get al the extra stuff to make if fly

[@Kendin-Yap]

I'm not trading. There are companies that provide 3D printing services. You can research them.

[@aaravseksaria265]

wht r the lengths needed for the rods?

[@adrianvicente5878]

What’s the size of your decal?

[@panorama8panorama845]

Bonjour et bravo pour cette vidéo très instructive peut tu me dire ou trouver la fermeture du capot merci d'avance Amicalement

[@Emr255]

ne kadar filament gidiyor

[@MuRaT_C]

Yazici islemi ne kadar sürdü? Müthis olmus, ellerine saglik!

[@Kendin-Yap]

Teşekkürler. Çok zaman alıyor. Günlerce süren bir süreç olduğu için toplam zamanı hatırlamıyorum.

[@02lars05]

Would it be a problem printing this in Pla+, weightwise? I have some yellow Pla+ laying around you see🙂

[@Kendin-Yap]

Printed parts will be approximately 40% heavier. That's a little too much for a small plane. It does not prevent it from flying. But Stall speed will increase.

[@pinoyDIY72]

Bravo bro