3D Printed Gear Pump - Biggest I Have Ever Built

[@moosanouman]

He is slowly becoming a memer

[@mmorgz6622]

And I love it 🤣

[@xeither289]

GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!

[@xeither289]

@@mmorgz6622 GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!

[@dang-x3n0t1ct]

@@xeither289 hail Satan

[@monn9239]

you god(t) spammed by bots

[@dekutree64]

If threads are too tight, take the fitting back out and heat it over a flame for a few seconds. It will soften the plastic as you screw it in.

[@rdcabal]

The sealing tape, well , you wind it the wrong way sometimes. Always go with the thread direction.

[@lewsdiod]

Love how you've just given up on saying "rigid flange coupling" :D always entertaining and fun watch! Cheers from Stockholm

[@cmmp5510]

The gear pumps flow depends of the speed of the motor. I need to make a pump and your videos are the best option I have found. Thanks.

[@mohammedhammouda2692]

hello, thank you for sharing this. I wonder what is the maximum pressure on this pump.

[@DIeem2042]

I might miss the water pump development, you are really honing your skill, almost no leaks. Looking forward to whatever comes! I like your style. btw i wonder how modifying the intake runner would help performance. perhaps a split fork Y directing the flow around the gears?

[@CIBERXGAMING]

TIP: get a 3D pen I 3D print a lot and prints break a LOT and its just super easy just to break out the 3D pen and weld the plastic back together! Also thanks for showing your errors. makes me feel better about mine...... great vid!

[@ScorgeRudess]

Can you make a gear system that multiplies the speed to crank the pump?

[@ratedmark4704]

I wouldn't have made the ports on the split, but on a solid part, maybe a 45 or 90 degree channel?

[@savioluis1385]

I have an idea.Why don't you make a dual flexi-impeller pump after the break.

[@fireheadpet2039]

Great sense of humour! I think it's time to completely rethink your pump design approach and strategy. I thought you quit these a while back but understand the "damnit, I'm no quitter" attitude! Working on a completely new "thing" will be good for your mind and subs too. Looking forward to seeing the next video

[@Jynxx_13]

You designed grooves for a seal against the acrylic cover but used silicone? Why not use a piece of tpu for the seal?

[@thombo1337]

as someone who owns and ender 3 s1 pro, im happy to see other people use it. its actually one of the best printers for its price

[@xeither289]

GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!

[@haroldcastellon5546]

What about a doble screw compressor that could action a piston ?

[@jimidjoriginal9295]

Hey, i thought you were not going to make any other water pumps, not that i have a problem though... i always love those leaking like hell pumps xD P.S. the pump cannot leak if it's completely submerged under water (we smart).

[@electronic7979]

Nice

[@holyholo1]

Good job!!! a flowmeter at the water outlet and an amp meter will tell you accurately the performance of the machine

[@mohamedsafwat3682]

It's normal response of gear pump,So well Done

[@thepctech]

I have watched your videos for a while now. I wonder why you have not made a 3d printed TPU gasket on any of these. I think it would fix lot your problems

[@ABagOfToes]

honestly

[@Emulation_Inflation]

Has anyone eles noticed a black rectangle in some videos? But when you rewind the video it's gone? It's like a problem with youtube I think? Maybe my phone I have an S22 Ultra? Awsome video btw.

[@andycrask3531]

What a lame flex

[@theichione1827]

How about trying a Gerotor pump?

[@justarixell4873]

hey uh stupid question and i doubt anyone will answer it but what software is he using for making the parts

[@nikolaus43211]

why you didnt print a tpu rubber seal?

[@CreativeEngineering_]

Make the gears touch the wall of the housing and you will be able to self prime.

[@Wiedy99]

As always Interesting Video! One advice i can give you: you can try out sealing cords for End caps. You can get them in any cord diameter. Just cut them to the length you need and use superglue on the ends to make a custom O-Ring. Makes it a bit easier and less messy, if you have to open these caps again for whatever reason. Keep it up!

[@MCsCreations]

Awesome work and design, dude! Well done! 😃 But yeah, dc motors HATE water. If any get on them they just die. 😬 Anyway, stay safe there with your family! 🖖😊

[@xeither289]

GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!

[@moerow8215]

If the inlet and outlet ports were designed separately and printed perpendicular to the flow of water then the layers wouldn’t separate. Then if they did fail you could simply print more and even modify the entire design without having to replace the main gear housing. 🥳

[@xeither289]

GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!

[@greenevegiebeast]

Try drilling and clamping the intake side to brace it.

[@cenreaper9127]

Bring back the old Rigid flange coupling

[@J_gumbainia]

Can you build a hydraulic rotary motor?.

[@nonitojrodjinar2003]

How much is your gear pump.

[@KevinDC5]

About a year ago, I attempt to fix clearances in a friend’s files of a gear pump he had designed and since they are precisely precise precision tools with intertwined intolerable tolerances, finely tuning and or fixing it went out the window with the first step of the project just like you also recently experienced 😅 What really fcuks with my mind is the gear rotation direction and flow direction are seemingly opposite when point of reference is referenced accordingly. The water enters the housing maybe’ and is immediately presented with a quantum shift around the drive gears, smashed but not compressed against the housing then suddenly rejoined in the matrix with not a moment too soon before collimating out the exit orifice of low pressure, or high pressure now, lolz

[@Guardian_Arias]

Right!? One expects the flow to go straight down the center in-between the gears. NOPE! The flow of the fluid wraps around in-between the walls and gears. If you want higher flow you need to focus the geometry of the vallies, such as the root circle, pitch circle and the Dedendum. The only parts that needs to be precise are the gaps between the addendum or the tip of the gear and the outer walls. The second precise location are the face of the teeth, they need to maintain a good seal with each other.

[@anishkommireddy4429]

what is the psi on this

[@stevenfaber3896]

Leaks = valid! keep it up!

[@7.3andsquarebodychannel64]

Make a positive displacement plunger pump

[@R9000]

Dude I wish I had a spaceship bath like that too.

[@KARTHIK5555ful]

that "IQ = room temp " got me .... Hard

[@youkofoxy]

Even better when you notice he is using Celsius.

[@mikaeljiskovkristensen7861]

gear pumps, lobe pumps and screw pumps is good at building pressure, not velocity.. so if you really want to see the performance, you need to connect a pressure gauge to it.

[@piconano]

I'm all pumped out.

[@anubis520]

I love the editing of this video. keep up the great work

[@beaverfeaver664]

For the love of god when will you stop putting COMING SOON! in the link of the files? Some designs you upload and some you put coming soon but I find your designs to be awesome and unique and I want to print them! PS: on your video of the pressure washer you put the pumps in parallel instead of in series. I know very little of fluids but I believe putting them in series (one after the other) would make the pressure washer have more pressure in exchange of being less able to push more quantity of water. Thank you a lot if you happen to read this

[@skirnir-atf]

I`ve disassmble NSh-10 (НШ-10) for repair and it`s made more complicated. There are double seals. Outside from inner seal connected for intake, to eleminate sealing leakage on high preshure. P.S. And it`s not self priming. If you tell the highpreshure pump to suck it woudnt do it. P.P.S. And used one cost not so many - around 10-15$, if you want to made HP washing machine.

[@jcr723]

I like your channel. The Rock and Laughing-mexican-guy inserts were funny!

[@Maderasdesign]

My mom would kill me if I sprayed water on our sidewalks in freezing temps lmao

[@kalashin1529]

its just funny, how u put in the Ryobi Drill IN the water of the bathtub .... like .... like its a waterproof one xD funny vid :D

[@bartekpudo9624]

Great video ! Ideal for next videos : create pomp but for air aka superchager OR propeling system for a boat like a screw propeled by a dril Good luck and keep it going ;)

[@almaefogo]

A pump suing the jet system that some boats use should work really well, at least the RC boat I made went pretty fast and pushed a lot of water.

[@xeither289]

GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!

[@xeither289]

@@almaefogo GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!

[@crystaldragon141]

Why not just use an o-ring under the lid?

[@mcrotbot]

Awesome vid! Love the redo

[@maverickstclare3756]

Maybe invest in flow meter then you can actually measure the performance

[@DavidFernandez-sc5ws]

Informative and entertaining.

[@536lion5]

The pump sounded like chewbucka

[@tleonard410]

You put your thread tape on the wrong way

[@SupangiAja]

Semangat

[@callofdutymobile6487]

Emotional damage 😂🤣

[@AKG58Z]

Lontra air compressor to pump water 🌊

[@Denis-S]

Чтобы не было такой фигни, как на 4:05, нужно чтобы ось отверстия была перпендикулярна укладываемым слоям пластика, а не лежала в их плоскости.

[@SlendisFi_Universe]

Why I get Finnish vibes from that rally English accent 😅

[@Jkauppa]

why so, you try to squeeze water between the gear teeth, centrifugal impeller pump is the best, no unnecessary squeezing

[@Jkauppa]

hey its quite a lot in kelvins tho

[@Jkauppa]

thats no air succing pump, it leaks

[@Jkauppa]

self-priming is the air capable pump

[@Jkauppa]

also the centrifugal self-ducted impeller does not jam if there is trash in the pipe, the gears will shear with minimal trash content

[@Jkauppa]

not very trash/crap resistant, industrial guy

[@ubicraftpl2591]

3D Printed piston pump??????

[@OZtwo]

Don't you really hate errors..like you print 15 hours to find an error to then fix it and loop over and bloody over again lol :)

[@thenextproblem8001]

When you IQ equals to room temperature hahahah i sharted man 🤣

[@mostakmiraj9583]

You need CNC

[@OuyaWoelders-hi9bn]

IQ = 24C or 90F

[@xeither289]

GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!

[@eua4808]

:)

[@monikaczarska6475]

me when your mom

[@demonicdice1017]

love the meme

[@xeither289]

GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!